RH Baby&child KEEGAN FULL User manual

page 1 of 2
KEEGAN BOOKCASE TOWER – ASSEMBLY INSTRUCTIONS
PARTS INCLUDED
A [1] BOOKCASE
TOOLS NEEDED
PHILLIPS-HEAD SCREWDRIVER (NOT INCLUDED)
1
2
3
4
Metal Base 2 pcs.
2 pcs.
2 pcs.
Metal Plug
Phillips Screws M4x37mm
5
2 pcs.
Phillips Screws M4x16mm
1 pc.
Metal Cable
NO. ITEM DESCRIPTION QT Y.
ASSEMBLY INSTRUCTIONS:
NOTE: REMOVE THE SCREWS
FROM THE SHELF CLIPS TO
ADJUST THE PLACEMENT OF
WOODEN SHELVES
YOUNG CHILDREN MAY BE INJURED BY TIPPING
FURNITURE. THE USE OF AN ANTI-TIPPING
RESTRAINT IS HIGHLY RECOMMENDED. WHEN
PROPERLY INSTALLED, THIS RESTRAINT COULD
PROVIDE PROTECTION AGAINST THE UNEXPECTED
TIPPING OF FURNITURE DUE TO SMALL TREMORS,
BUMPS OR CLIMBING. WE RECOMMEND
ATTACHMENT TO A WALL STUD WHERE
POSSIBLE OR INSTALLATION BY A
PROFESSIONAL WHEN ATTACHING THE ANTI-
TIP KIT TO MASONRY OR CONCRETE WALL.
ANTI-TIPPING RESTRAINT:
THE ANTI-TIPPING RESTRAINT IS ONLY A DETERRENT.
IT IS NOT A SUBSTITUTE FOR PROPER ADULT
SUPERVISION.
WARNING:
Phillips-head screwdriver
(not included)

page 2 of 2
KEEGAN BOOKCASE TOWER – ASSEMBLY INSTRUCTIONS
1. ATTACH METAL BASES TO THE
BOOKCASE (A) AND THE WALL
USING THE SCREWS PROVIDED (3, 4).
2. PLACE THE TWO ENDS OF METAL
CABLE (5) IN THE MIDDLE OF METAL
BASE AND CONNECT THEM WITH
METAL PLUGS (2) THROUGH THE
HOLES IN THE METAL BASE AND
WIRE HEAD.
3. THE ADJUSTABLE LEVELERS
SHOULD BE USED WHEN THE
BOOKCASE IS PLACED ON AN
UNEVEN FLOOR.
WALL
CARE INSTRUCTIONS:
1. DUST OFTEN USING A CLEAN, SOFT, DRY LINT-FREE CLOTH.
2. BLOT SPILLS IMMEDIATELY AND WIPE WITH A CLEAN, DAMP CLOTH.
3. DO NOT USE CHEMICAL CLEANERS, ABRASIVES OR FURNITURE POLISH ON THE LACQUERED FINISH.
2
2
1
1
5
5
A
Can be adjusted
by using levelers.
A
WALL
4
3
A