RH CHAMPEAUX PIVOT User manual

CHAMPEAUX PIVOT SPOTLIGHT
OF F
OUT
IN
(A)
(B)
(C)
PARTS ENCLOSED
(A) Shade Cover (1)
(B) Bulb (1)
(C) Shade (1)

CHAMPEAUX PIVOT SPOTLIGHT
IMPORTANT SAFETY INSTRUCTIONS
INSTALLATION BY A LICENSED ELECTRICIAN IS STRONGLY
RECOMMENDED.
This xture has been rated for one (1) 6-Watt maximum Type LED
PAR16 lightbulb (included). To avoid the risk of re, do not exceed the
recommended wattage.
WARNINGS
All wires are connected. When unpacking, be careful not to pull
wires, as a bad connection may result. Do not connect electricity
until your fixture is fully assembled. To reduce the risk of fire,
electrical shock, or personal injury, always turn off fixture and allow it
to cool prior to replacing the light bulb. Do not touch or look directly
at the bulb when fixture is illuminated. Keep flammable materials
away from lit bulb.
WARNING: This product can expose you to lead, which is
known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information, go to
www.P65Warnings.ca.gov.
THIS PRODUCT IS NOT A TOY AND HAS NO PLAY
VALUE.
WARNING: STRANGULATION HAZARD
Keep cord at least 3 feet away from cribs, bassinets, and toddler beds.
Keep out of reach of children under 3 years of age.
ASSEMBLY & INSTALLATION
SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE FUSE
BOX OR CIRCUIT BREAKER PANEL.
1. Carefully remove all parts from the box and remove all plastic
coverings.
2. Remove Shade Cover (A) from Shade (C) by turning in a counter-
clockwise direction.
3. Insert Bulb (B) into the socket.
4. Replace Shade Cover (A) to the top of Shade (C).
5. Plug into proper electrical outlet and test xture.
6. Assembly is complete.
CARE INSTRUCTIONS
Do not use polishes or cleaners on the fixture. Wipe clean with a soft,
dry cloth.