RHINOMOTIVE R1150 User manual

USER MANUAL
PANEL TRAIN
PN: R1150
INNOVATIVE PARTS CART
RHINOMOTIVE LTD - UK
71-75 Shelton Street, London, United Kingdom
www.rhinomotive.com
Scan QR Code

2/3 www.rhinomotive.com
1. ADULT ASSEMBLY REQUIRED
2. APPLICATION/USE
3. TECHNICAL SPECIFICATIONS
• Body material: Galvanized steel with powder coated finish
• Open size:1230 mm(W)x1330 mm(D)x1900mm (H)
• Front-Supporter size: 1230/1060 mm(W)x780 mm(D)x 1900 mm(H)
• Back-Supporter size: 1060/890 mm(W)x550 mm(D)x 635 mm(H)
• Tubing size: F30x1.2mm+F25x1.2mm
• Box 1 + Box 2 includes:
• 3 shelves
• 2pcs 600mm arms
• o 6 “S” shape hooks
• 6 x 4inch Pu Castors (Two Swivel with Brake)
• Weight: 41.5 Kg
• Maximum Load Capacity: 150 Kg
• Made in PRC
• Assembly kit contains small parts that can present choking hazards for children
• Assembly kit contains small parts with sharp points
• Assembly kit contains small parts with sharp edges
• Components are packed in plastic bags that could present a suffocation hazard. Dispose
of plastic bags as soon as unpacked
• Use on a stable, level and dry surface
• Always keep your work area clean and tidy
• Not for use by unauthorized persons and minors
• Not to be used as a climbing frame or anchor point
• Tie back long hair and avoid wearing loose clothing when using this tool
• The Innovative Cart Panel Train is an intelligently designed space-saving solution for your panel storage needs.
This auto body shop storage cart holds up to six large vehicle panels and glass
• This unit can be folded up so that it takes up only two feet when not in use, which maximizes your shop›s floor space
• Features extensive rubber and foam padding that prevents damage to the vehicle
• Easily rolls around your shop on the four industrial grade locking caster wheels which glide easily when in the open
position and have zero movement when locked in place

www.rhinomotive.com
NO DESCRIPTION QTY
1 Top Connect Bar 1
2 Middle Connect Bar 1
3 Bottom Connect Bar 1
4 Upper Vertical Bar 2
5 Lower Vertical Bar (L) 1
6 Lower Vertical Bar (R) 1
7 Support Arm 2
8 Base Tube 2
9 Support Arm with Holes (L) 3
10 Support Arm with Holes (R) 3
11 Mesh Shelf 3
12 Bolt (M8x50) 18
NO DESCRIPTION QTY
13 Washer (Ø8) 72
14 Lock Nut (Ø8) 36
15 Bolt (M8x40) 18
16 Casters Set 6
17 Hooks 6
18 Vertical Support Bar with Foam 8
19 Buckle with Knob 8
20 Back Base Tube 2
21 L-shape Connectors 2
22 Bolt (M10x50) 2
23 Lock Nut (Ø10) 2
24 Pin (M8x50) 4
4. PARTS LIST
5. PARTS BREAKDOWN
www.rhinomotive.com 3/5

6. ASSEMBLY INSTRUCTIONS
4/5 www.rhinomotive.com
1) Install wheels. No washer required.
2) Remove rear wheel caster nut from cart and discard lock washer.
3) Install Leg Connector, noting direction as shown.
1
2
3
2
3

5/5
www.rhinomotive.com
RHINOMOTIVE LTD - UK
71-75 Shelton Street, London, United Kingdom
www.rhinomotive.com
Scan QR Code
4
4) Install extension leg with rubber pad toward center. Tighten 3/4” nut - do not overtighten.
Repeat for another arm. Use pin to hold leg in upright position.
5) Install protective rubber cap. Adhesive can be used to better keep rubber cap in place
6) Center the post holder on back side of cart. Tighten knobs. Posts shown above in stored position.
5
6