Ricoh C211 User manual

®
SERVICE MANUAL
PN: RCFM2105
C211/C212/C216/C224
®
®
RICOH GROUP COMPANIES

SERVICE MANUAL
®
C211/C212/C216/C224
RICOH GROUP COMPANIES
®
®

C211/C212/C216/C224
SERVICE MANUAL
PN: RCFM 2105

The Service Manual contains information regarding
service techniques, procedures, processes and
spare parts of office equipment distributed by
Ricoh Corporation. Users of this manual should be
either service trained or certified by successfully
completing a Ricoh Technical Training Program.
Untrained and uncertified users utilizing
information contained in this service manual to
repair or modify Ricoh equipment risk personal
injury, damage to property or loss of warranty
protection.
RicohCorporation
WARNING

LEGEND
PRODUCT CODE COMPANY
GESTETNER RICOH SAVIN
C211 5315 VT2130 —
C212 5330 VT2300 —
C216 5325 VT2105 —
C224 5327 VT2200 3200DNP
DOCUMENTATION HISTORY
REV. NO. DATE COMMENTS
*4/95 Reprint
1 10/95 C224 Addition
2 8/96 Reprint

RICOH PRIPORT
Model VT2130
SERVICE MANUAL
(This is an addendum to the SS950/830 Service Manual. Only those sections
which are unique to the VT2000 Series have been included.)
NOTE: References are made throughout this manual to other models in the
VT2000 series. These are not currently available in this country.

OVERALL MACHINE
INFORMATION

1. SPECIFICATIONS
Configuration:
Master processing:
Printing process:
Original type:
Original size:
Reproduction ratios:
Image mode:
Color printing:
Master feed/eject:
Master processing area:
Printing area:
Leading edge margin:
Print paper size:
Print paper weight:
Print speed:
First print time:
Paper feed table capacity
Paper delivery table
capacity:
Power source:
Desk top
Digital
Full automatic one drum stencil system
Sheet
Maximum 307 mm x 432 mm (12.0” x17.0”)
LT version: 100 !40} 93 Yo, 75 !XO, 64 YO
Line/Photo
Drum unit replacement system
Roll master automatic feed/eject
Maximum 216 mm x 354 mm
(8.5” X13.9”)
Maximum 210 mm x 350 mm
(8.3” x13.7”) at 20%/65% RH
10mm
Minimum 90 mm x 148 mm (3.6” x5.8”)
Maximum 297 mm x 442 mm (11.6” X17.4”)
141bto561b
60, 75, 90, 105, 120 sheets/minute (5 steps)
35 seconds (LG size)
1000 sheets, 17.6 lb
500 sheets, 17,6 lb
120V, 60 Hz .....................5.5A
IIOV, 60 Hz ......m..............6mOA
1“1

Power consumption:
Weight:
Dimensions:
(W XDXH)
Original guide
width-settings:
Original scanning time:
Original thickness:
Original feed speed:
Pixel density:
Master eject box
capacity:
Paper feeding:
Feed table side plate
width settings:
Paper feed roller
pressure:
Separation roller
pressure:
Side registration:
Vertical registration:
Paper table raising /
lowering speed:
Ink supply:
Pressure roller pressure:
Paper delivery:
110/120 Vversion: 430 W
110/1 20 Vversion: 220.4 lb
Optional table: 57,3 lb
When stored: 29,0” x23.9” x22.4”
When set up: 50.4” x23.9” x25.9”
Table only: 25.2” x22.4x 17.9”
38.6” to 12.44”
3ins/l line
0.06 mm to 0,5 mm
20.8 mm/second
16 dots/mm
25 masters (at normal conditions)
20 masters (at 10“C/30 %RH)
Friction rolIer/center separation system
3.46” to 12.48”
Normal position ,...,,,,,,.,,250gOg
Thick paper position.........550 g
Normal position ................180 g
Weak position ...mm.............70g
~1Omm (manual)
*2O mm (mechanical)
26 mm/second (60 Hz)
Automatic ink supply system
10*0.3kg
Air knife/vacuum delivery
1-2

Delivery side plate 3.1 5“ to 126“*
width settings:
Print counter: 7digits
Master counter: 6digits
Supplies:
Priport Master VT-S:Thermal master 240 mm width
Max run length 2000 prints
Master roll 250 masters/1 roll
Master length 480 mm/1 master
Ink:
Colors: 500 cc ink pack
Black, Red, Blue, Green, Brown
1-3

2. GUIDE TO COMPONENTS AND THEIR
FUNCTION
(Paper Feed Side)
12
1
1
1
11’ /
34
/// /
5
9
10
1-4

No. Name Function
1, ADF Unit
(VT2300/2500)
2. ADF Unit Open
Button
(VT2300/2500)
3. Original Guides
4. Original Table
5. Original Table
Release Lever
6. Feed Roller
Pressure Lever
7. Separation Roller
Pressure Lever
8. Paper Feed Side
Plate
9, Paper Feed Table
10. Side Plate Fine
Adjusting Dial
11. Front Door
12. Paper Delivery Table
13. Operation Panel
14. ADF On/Off Select
Switch
(VT2300/2500)
15. Original Tray
Feeds the original to the printing position
automatically.
Use to open the ADF unit.
Adjust these guides to position the originals
correctly.
Place the originals on this table.
Use to open the original table unit to the left for
master installation.
Use to adjust the contact pressure of the paper
feed roller according to paper thickness. ‘------
Use to adjust the separation roller pressure to
prevent double feed.
Use to prevent paper skew.
Set the paper on this table.
Use to shift the paper feed table sideways.
Open for access to the inside of the machine.
Completed prints are delivered here.
Operator controls and indicators are located here.
When setting originals one sheet at atime, set this
switch to the Off position.
Originals used to make amaster are delivered to
this tray.
1-5

(Paper Delivery Side)
26
22
27 28
21
16
,4 \
17 18
19
1-6

No. Name
16.
17.
18.
19.
20.
21.
22.
23.
24.
25,
26.
27.
28.
Master Cut Button
Pressure Release
Lever
Drum Rotating
Button
Drum Unit
Ink Holder
Main Switch
Small Size Paper
Delivery End Plate
(for smaller than
LT)
Paper Delivery End
Plate (for larger
than LT)
Paper Delivery
Side Plate
Master Eject
Container Cover
Function
Press this button to cut the master paper leading
edge after installing anew master roll,
Use to install the master roll, or to clean the
thermal head.
Press to replace the drum or to remove misfed
paper,
The master paper is wrapped around this unit.
Set the ink cartridge in this holder.
Use to turn the power on or off.
Use to align the leading edge of small-sized (less
than LT) prints,
Use to align the leading edge of prints larger than
LT.
Use to align the prints on the paper delivery table.
Open when removing the master eject container.
Memory/Class switch Use to select memory or class mode,
(VT2300/2500)
Skip Paper Feed Use to adjust paper feed interval or amisted
Switch (VT2300/2500) master.
Printing Density Use to select the printing density according to the
Select Switch type and quality of the original.
(VT21 00/21 30/21 50)
Master Eject Unit Press to remove misfed paper or amisfed master.
Open Button
1-7