Riftek RF627 Series User manual

Certified according to ISO 9001:2015
LASER SCANNERS
22, Logoisky tract, Minsk
220090, Republic of Belarus
tel/fax: [phone]
[e-mail]
User's manual
www.riftek.com
RF627 Series,
RF627Smart Series

2
Laser Scanners
RF627, RF627Smart [Revision 2.1.0] 04.01.2021
Contents
.............................................................................................................................................41. Safety precautions
.............................................................................................................................................42. CE сompliance
.............................................................................................................................................43. Laser safety
.............................................................................................................................................44. General information
.............................................................................................................................................45. Structure and operating principle
.............................................................................................................................................56. Configurations, operating modes, options
.............................................................................................................................................67. Basic technical data
........................................................................................................................................... 67.1. Specification
........................................................................................................................................... 67.2. Working ranges and dimensions
.............................................................................................................................................98. Example of item designation when ordering
.............................................................................................................................................99. Overall demands for mounting
.............................................................................................................................................910. Connection
........................................................................................................................................... 910.1. Designation of connector contacts
........................................................................................................................................... 1010.2. Cables
........................................................................................................................................... 1110.3. Button and indication
.............................................................................................................................................1111. Ethernet interface and user software development
.............................................................................................................................................1212. Network configuration and the first connection
........................................................................................................................................... 1212.1. Network configuration
........................................................................................................................................... 1212.2. First connection
.............................................................................................................................................1313. Web page
.............................................................................................................................................1614. Search for scanners on the network and connection
.............................................................................................................................................1615. Results display area
........................................................................................................................................... 1615.1. Controls
........................................................................................................................................... 1715.2. Display modes ................................................................................................................. 1715.2.1. Profile mode................................................................................................................. 1815.2.2. Video mode
.............................................................................................................................................1816. Setting parameters
.............................................................................................................................................1917. "Network" tab. Network parameters
.............................................................................................................................................2018. "General" tab. General parameters
........................................................................................................................................... 2118.1. CMOS sensor parameters
........................................................................................................................................... 2218.2. Laser parameters
........................................................................................................................................... 2218.3. Image quality settings
................................................................................................................. 2218.3.1. Exposure time and laser power
................................................................................................................. 2318.3.2. Multiple exposure mode and EDR mode
........................................................................................................................................... 2418.4. ROI settings
........................................................................................................................................... 2518.5. Data stream control
.............................................................................................................................................2619. "Processing" tab. Profile extraction settings
........................................................................................................................................... 2619.1. "Pre processing" section. Profile extraction parameters
................................................................................................................. 2719.1.1. "Peak selection mode" parameter
........................................................................................................................................... 2819.2. "Post processing" section. Filtering
.............................................................................................................................................2920. "Triggering" tab. Triggering modes
........................................................................................................................................... 3020.1. Time cycle
........................................................................................................................................... 3120.2. Synchronization diagram
........................................................................................................................................... 3220.3. Selecting a source of synchronization events
........................................................................................................................................... 3220.4. Synchronization by external trigger
................................................................................................................. 3320.4.1. Setting the inputs
................................................................................................................. 3320.4.2. Setting the encoder counter
................................................................................................................. 3420.4.3. Examples
........................................................................................................................................... 3520.5. Setting the outputs
.............................................................................................................................................3521. "Triggering settings" tab. Synchronization of multiple scanners
........................................................................................................................................... 3621.1. Synchronous measurements
........................................................................................................................................... 3621.2. Asynchronous measurements
.............................................................................................................................................3722. "Dump" tab. Accumulated profiles parameters
........................................................................................................................................... 3822.1. "Dump control" section. Building 3D models
........................................................................................................................................... 3822.2. "3D view" section. 3D model display parameters

Laser Scanners
RF627, RF627Smart [Revision 2.1.0] 04.01.2021
3
........................................................................................................................................... 3922.3. "Download" section. Downloading profiles
........................................................................................................................................... 3922.4. Operations with profiles
................................................................................................................. 3922.4.1. Accumulation of profiles in internal memory of the scanner
................................................................................................................. 3922.4.2. Viewing accumulated profiles
................................................................................................................. 4022.4.3. Export of accumulated profiles
.............................................................................................................................................4123. "System" tab
........................................................................................................................................... 4123.1. "Information" section
........................................................................................................................................... 4123.2. "Update" section................................................................................................................. 4223.2.1. Firmware update
................................................................................................................. 4223.2.2. Calibration table update
........................................................................................................................................... 4323.3. "Licenses" section
........................................................................................................................................... 4623.4. "Logs" section
.............................................................................................................................................4624. "Smart" tab
........................................................................................................................................... 4724.1. Smart blocks and parameters
................................................................................................................. 4824.1.1. "Smart Blocks" tab
................................................................................................................. 4924.1.2. "Block Settings" tab
................................................................................................................. 4924.1.3. "Profile Approximation" tab
........................................................................................................................................... 4924.2. Creating a Smart function
................................................................................................................. 4924.2.1. Stage 1. Profile approximation
.............................................................................................................. 5024.2.1.1. Splitting profile points into contours
.............................................................................................................. 5124.2.1.2. Splitting each contour into a set of approximating segments
................................................................................................................. 5324.2.2. Stage 2. Building a graph
.............................................................................................................. 5324.2.2.1. Results display area
.............................................................................................................. 5424.2.2.2. Example of building a graph
................................................................................................................. 5624.2.3. How it works................................................................................................................. 5724.2.4. Saving and loading Smart functions
........................................................................................................................................... 5724.3. Smart blocks ................................................................................................................. 5724.3.1. Data types ................................................................................................................. 5824.3.2. Sections .............................................................................................................. 5824.3.2.1. "Feature detectors" section
.............................................................................................................. 6424.3.2.2. "Complex shapes" section
.............................................................................................................. 6624.3.2.3. "Math functions" section
.............................................................................................................. 7024.3.2.4. "Converters" section
.............................................................................................................. 7224.3.2.5. "Control" section
.............................................................................................................. 7224.3.2.6. "Input and output" section
.............................................................................................................................................7625. Maintenance
.............................................................................................................................................7626. Troubleshooting
.............................................................................................................................................7727. Annex 1. Recovery mode
.............................................................................................................................................7828. Annex 2. Editing defective pixels
.............................................................................................................................................8029. Annex 3. Overall and mounting dimensions of scanners with options
........................................................................................................................................... 8029.1. Example of a scanner with replaceable protective windows, EW option
........................................................................................................................................... 8229.2. Example of a scanner with air cooling, AK-EW-AC option
........................................................................................................................................... 8329.3. Example of a scanner with water cooling, AK-EW-AC option
.............................................................................................................................................8330. Annex 4. Web API
........................................................................................................................................... 8330.1. General device information
........................................................................................................................................... 8330.2. Reading and writing parameters
........................................................................................................................................... 8430.3. Saving and restoring settings. Rebooting the device
........................................................................................................................................... 8430.4. Getting information from the device log file
........................................................................................................................................... 8430.5. Authorization
........................................................................................................................................... 8530.6. Profile request
........................................................................................................................................... 8530.7. Smart
.............................................................................................................................................8531. Warranty policy
.............................................................................................................................................8532. Technical support
.............................................................................................................................................8533. Revisions
.............................................................................................................................................8634. Distributors

4
Laser Scanners
RF627, RF627Smart [Revision 2.1.0] 04.01.2021
1. Safety precautions
· Use supply voltage and interfaces indicated in the scanner specifications.
· In connection/disconnection of cables, the scanner power must be switched off.
· Do not use scanners in locations close to powerful light sources.
· To obtain stable results, wait about 20 minutes after scanner activation to achieve
uniform scanner warm-up.
· Scanners must be grounded.
2. CE сompliance
Laser scanners have been developed for use in industry and meet the requirements
of the following Directives:
· EU directive 2014/30/EU. Electromagnetic compatibility (EMC).
· EU directive 2011/65/EU, “RoHS“ category 9.
3. Laser safety
Scanners belong to 2M laser safety class according to IEC/EN 60825-1:2014.
Scanners make use of an c.w. 660 nm or 405 nm or 450 nm or 808 nm wavelength
semiconductor laser. Maximum output power is 10 mW. The following warning label is
placed on the scanner housing:
The following safety measures should be taken while operating the scanners:
· Do not target laser beam to humans.
· Do not disassemble the scanner.
· Avoid staring into the laser beam.
4. General information
Laser scanners are designed for non-contact measuring and checking of surface
profile, position, displacement, dimensions, sorting and sensing of technological objects,
3D models construction.
5. Structure and operating principle
Operation of the scanners is based on the principle of optical triangulation (see
Figure below).
Radiation of a semiconductor laser is formed by a lens in a line and projected to an
object. Radiation scattered from the object is collected by the lens and directed to a two-
dimensional CMOS image sensor. The image of object outline thus formed is analyzed by a
FPGA and signal processor, which calculates the distance to the object (Z-coordinate) for
each point of the set along the laser line on the object (X-coordinate). Scanners are
characterized by the following parameters:
· SMR - the beginning of the range for the Z-coordinate;
· MR - the measuring range for the Z-coordinate;
· Xsmr - the measuring range for the X-coordinate at the beginning of Z;
· Xemr - the measuring range for the X-coordinate at the end of Z.

RF627, RF627Smart [Revision 2.1.0] 04.01.2021
Laser Scanners
5
6. Configurations, operating modes, options
The following configurations are available:
· red laser scanners, 660 nm;
· blue laser scanners (BLUE version), 405 or 450 nm;
· infrared laser scanners (IR version), 808 nm.
We use different lasers due to a wide range of applications. For example, the use of
blue lasers instead of red ones is optimal for the control of shiny materials, high-
temperature objects and organic materials.
The use of scanners with lasers of different wavelengths in one measurement
system makes it possible to avoid the scanners mutual influence and greatly simplifies the
system construction. An example of system implementation: https://youtu.be/9evAIXqrPas
Scanners can be equipped with a built-in heater for operation under low-
temperature conditions. Scanners can be equipped with the air (water) cooling system and
the air-knife system for windows.
There are two operating modes in the full working range: Basic mode with the
frequency of 484 Hz (profiles/second) and DS mode with the frequency of 938 Hz.
In addition, you can use the ROI function, which makes it possible to increase the
working frequency of the scanner in the limited working range up to 5096 Hz in Basic mode
and up to 6800 Hz in DS mode.
The Smart version of the scanner (RF627Smart) makes it possible to measure
geometric parameters of the object profile in real time directly in the scanner without
connecting to a computer. Analysis, calculations, measurements, tolerance control are
carried out according to the algorithm created by the user. To build an algorithm, a simple
and intuitive tool is provided - a computation graph. The graph is formed from a library of
ready-made blocks. Various combinations of blocks and connections between them allow
the user to create an almost unlimited number of measuring functions, as well as to process
profiles of any complexity. Measurement results can be transmitted via various protocols
(Ethernet/IP, Modbus TCP, UDP), as well as to the logic outputs of the scanner in order to
control the actuators and notify about product suitability.
NOTE: By purchasing the RF627 scanner, you get the opportunity to use all the
functions of the RF627Smart scanner for 100 hours. The trial period can be extended upon
request. To use all functions of the RF627Smart scanner for an unlimited time, you must
purchase a license (it is possible to purchase a license for certain functions). For more
details, refer to par. 24.3.

6
Laser Scanners
RF627, RF627Smart [Revision 2.1.0] 04.01.2021
7. Basic technical data
7.1. Specification
Sampling rate, accuracy, resolution
Nominal sampling rate (full working range), not
less
490 profiles/s (standard mode),
938 profiles/s (DS mode)
Maximum sampling rate (ROI mode)
5096 profiles/s,
6800 profiles/s (DS mode)
Linearity (measurement error), Z axis
±0.05% of the range (standard mode),
±0.1% of the range (DS mode)
Linearity (measurement error), X axis
±0.2% of the range
Resolution, Z axis
0.01% of the range (standard mode),
0.02% of the range (DS mode)
Resolution, X axis
648 or 1296 points (programmable value)
Laser
660 nm or 405 nm or 450 nm or 808 nm
Class 2M according to IEC/EN 60825-1:2014
Interface
Basic
Ethernet / 1000 Mbps
Synchronization inputs
RS422, 3 channels
Laser on/off hardware input
1
Outputs
RS422, 1 channel
Power supply
9...30 V or 12...39 V for scanners with Blue laser
Power consumption, not more
6 W (without a built-in heater)
Environmental resistance
Enclosure rating
IP67
Vibration
20 g / 10...1000 Hz, 6 hours for each of XYZ axes
Shock
30 g / 6 ms
Operating ambient temperature
-20…+40°С, or
-40…+40°С for scanners with built-in heater, or
-40…+120°С for scanners with built-in heater and cooling
system
Storage temperature
-20…+70°С
Relative humidity
5-95% (no condensation)
Housing/windows material
aluminum/glass
7.2. Working ranges and dimensions
Range
MR,
mm
SMR,
mm
EMR,
mm
Хsmr,
mm
Xemr,
mm
Size,
mm
Weight,
g
25/10-8/11
10
25
35
8
11
Figure 1
0.37
65/25-20/22
25
65
90
20
22
Figure 2
0.6
75/50-30/41
50
75
125
30
41
70/100-48/82
100
70
170
48
82
70/150-58/122
150
70
220
58
122
95/150-53/106
150
95
245
53
106
82/200-60/150
200
82
282
60
150
90/250-65/180
250
90
340
65
180

RF627, RF627Smart [Revision 2.1.0] 04.01.2021
Laser Scanners
7
Range
MR,
mm
SMR,
mm
EMR,
mm
Хsmr,
mm
Xemr,
mm
Size,
mm
Weight,
g
180/250-170/278
250
180
430
170
278
Figure 3
L=326 mm
2
190/300-160/300
300
190
490
160
300
L=283 mm
1.9
220/300-203/330
300
220
520
203
330
L=374 mm
2.1
260/400-210/400
400
260
660
210
400
L=350 mm
2.2
325/500-268/500
500
325
825
268
500
L=415 mm
2.3
400/600-320/600
600
400
1000
320
600
L=490 mm
2.4
475/700-374/700
700
475
1175
374
700
L=558 mm
2.5
545/800-425/800
800
545
1345
425
800
L=627 mm
2.6
615/900-480/900
900
615
1515
480
900
L=696 mm
2.7
690/1000-535/1000
1000
690
1690
535
1000
L=765 mm
2.8
620/1165-430/1010
1165
620
1785
430
1010
L=554 mm
2.5
Detailed CAD documentation (2D and 3D) is available here:
https://riftek.com/upload/iblock/757/2D_CAD.rar
https://riftek.com/upload/iblock/94e/RF627_3D.zip
The housing of the scanner is made of anodized aluminum. The front panel of the
housing has two windows: the output window and the window for receiving radiation
reflected from the object under control. Overall and mounting dimensions of the scanners
are shown in the Figures below. The housing has fastening holes for installing the scanner
on the equipment. The sensors, shown in Figure 3, are equipped with an adjustable support
that allows you to implement three options for mounting the scanner.
The scanner has two connectors, Reset button and LED indicators.
Figure 1

8
Laser Scanners
RF627, RF627Smart [Revision 2.1.0] 04.01.2021
Figure 2
Figure 3

RF627, RF627Smart [Revision 2.1.0] 04.01.2021
Laser Scanners
9
8. Example of item designation when ordering
RF627.(WAVE)-SMR/MR-Xsmr/Xemr-M(R)-H--AK-EW-AС
Symbol
Description
(WAVE)
Laser wavelength. 660 nm – no symbol, 405 nm or 450 nm – BLUE, 808 nm – IR.
SMR
Beginning of the measuring range for Z, mm.
MR
Measuring range for Z, mm.
Xsmr
Measuring range for X-coordinate at the beginning of the measuring range for Z-coordinate, mm.
Xemr
Measuring range for X-coordinate at the end of the measuring range for Z-coordinate, mm.
М
Cable length, m .
R
Option, robot-cable.
H
Built-in heater.
AK
Air knife for windows.
EW
Removable protective windows option.
AС
Built-in air cooling system. Ordering a water cooling system requires consultation with the
manufacturer.
Example: RF627BLUE-70/50-30/42-5 – Scanner with a blue laser, SMR - 70 mm, MR - 50 mm, Xsmr - 30
mm, Xemr - 42 mm, cable length - 5 m.
Note: Overall dimensions of the sensors with the AK, EW and AC options are given in Annex 3. Detailed
documentation (2D and 3D) is available for download on RIFTEK's official website.
9. Overall demands for mounting
The scanner should be positioned so that the object under control has to be placed
within the working range of the scanner. In addition, no foreign objects should be allowed to
stay on the path of the incident and reflected laser radiation.
Where the objects to be controlled have intricate shapes and textures, the incidence
of mirror component of the reflected radiation to the receiving window should be minimized.
ATTENTION!
The scanner must be grounded. Static electricity may cause the failure of electronic components.
10. Connection
Scanners come with two cables:
1) Ethernet cable;
2) Power cable with synchronization lines and outputs.
ATTENTION!
Below is a description of the cables that come with standard configuration scanners.
Documentation on the cables is always included in the delivery package.
10.1. Designation of connector contacts
The scanner is equipped with two connectors:
1. Ethernet connector.
2. Multi-connector.
View from the side of connector contacts is shown below:

10
Laser Scanners
RF627, RF627Smart [Revision 2.1.0] 04.01.2021
Connector 1
(Binder 712 Series, #09-0427-80-08)
Connector 2
(SACC-DSI-M12MS-12CON-M12)
Designation of contacts is given in the tables below.
Connector 1:
#
Assignment, 100baseTX
Assignment, 1000baseT
1
D4+
2
D3-
3
D3+
4
RX-
D2-
5
RX+
D2+
6
TX-
D1-
7
TX+
D1+
8
D4-
Connector 2:
#
Assignment
Note
1
OUT1-
RS422
2
IN3-
RS422
3
IN3+
RS422
4
IN2-
RS422
5
IN2+
RS422
6
NEXT_LAS_OFF
Hardware laser on/off input. Hardware on/off means
enabling/disabling laser radiation regardless of scanner settings.
7
IN1+
RS422
8
IN1-
RS422
9
OUT1+
RS422
10
VIN
+9...30V, 650mА max
11
GND
Grounding
12
0V
0V power supply («-»)
10.2. Cables
Cable 1:
Pin number, RJ45
Assignment, 100baseTX
Assignment, 1000baseT
Wire color
1
TX+
D1+
White/orange
2
TX-
D1-
Orange
3
RX+
D2+
White/green
4
D3+
Blue
5
D3-
White/blue
6
RX-
D2-
Green
7
D4+
White/brown
8
D4-
Brown