RIGHT ANGLE 2000EM User manual

Read all the instructions before beginning.
K&A Manufacturing
Hardware Pack # 52142
www.raproducts.com
Page1 OF 3
Version Dated: 6/22/15
Instruction # 52677
6703 Zinser Street
Schofield, WI 54476
Phone: [phone]
Fax: [phone]
2000EM Mouse Tray On
Keyboard Tray or Drawer

Page 2 OF 3
K&A Manufacturing
6703 Zinser Street Schofield, WI 54476
Phone: [phone]
Fax: [phone]
www.raproducts.com
Tools Required for Assembly:
Power Driver W/Adjustable Torque
#2 Phillips Head Driver Bit
7/16" Driver Bit, Wrench, or Socket
Hardware Pack #52142 Drawn Actual Size
Instruction # 52677
ITEM # PART # DESCRIPTION QTY.
1 Varies Keyboard Tray or Drawer 1
2 2140 1/4-20 x 1 Phillips Flat Head Machine Screw 1
3 800437 3/8 x 1 1/2 x 3/8 Plastic Washer Modified 1
4 2000EM Teardrop Mouse Tray 1
0201 1/4 x 1 1/2 x 1/16 Nylon Washer 1
6 01 3 1/4 x 1 1/2 x 3/32 Fender Washer 1
7 0 60 1/4"-20 Low Crown Acorn Nut 1
8 EMF Mouse Fence For 2000EM 1
52140 800437 50201 50153
50560
7
632

6703 Zinser Street Schofield, WI 54476
If the tray or drawer
bottom. Set the palm support and the screws aside
has a palm support at
Phone: [phone]
K&A Manufacturing
1
the front, remove it by removing the screws from the
www.raproducts.com
for reinstallation later.
Page 3 OF 3
Fax: [phone]
Step 1:
Instruction # 52677
Step 2: Insert the machine screw 2through the hole in the rib. You can install the
mouse tray 4on the right hand or left hand side of the tray or drawer. The top of the
screw should be flush with the top of the tray or drawer.
Step 3: Place the black plastic washer 3onto the machine screw 2against the
bottom of the tray or drawer. Align the groove in the washer with the rib on the tray 1.
Place the mouse tray 4on the machine screw against the black plastic washer. Next
place the nylon washer 5on the machine screw against the mouse tray. Place the
metal washer 6on the machine screw against the nylon washer. Thread the acorn
nut 7onto the machine screw. Tighten it so the tray will rotate but not spin freely.
Step 4: Reinstall the palm support.
If you install the mouse tray on the left side
of the tray or drawer, pull the fence off the
front of the tray and install it on the back
with the projection facing up.
7
6
1
4
8
2
3