Right On RVII User manual

Plano Exam - VA Check
2.2 Data Input/Transfer from Lens Meter
Setting Menu
Examination Basic Flow
1. Start up and System Initialization
2.1 Data Input/Transfer from Autoref
3. PD and Forehead Rest Adjustment
4.1 Preset Program EXAM.
- auto initialized as turn on
power, or
To initialize RVll system
- manual initialization
press AC twice, or
Please refer to RVll Instruction Manual for details.
Selectable preset programs
program finish if
"End Program"
indicated on
screen of CB
refer to Leaflet "Program
Examination" for details
Press R, L or R&L
Press ▲▼
to check
highest VA
Press
Plano
AUTOREF or LM data transferred first will be copied in SBJ1
Selectable receiving 1 or 10 data in setting menu “Communication Setting 2”
After press REF, if selected receiving 1 data, Autoref data is set
After press REF, if
selected receiving 10
data, select data
number in dot screen
Press SET
Press NEXT or
BACK to select
Selectable receiving 1 or 10 data in setting menu “Communication Setting 2”
After press LM, if selected receiving 1 data, Autoref data is set
After press LM, if
selected receiving 10
data, select data
number in dot screen
Press SET
Press NEXT or
BACK to select
AUTOREF or LM data transferred first will be copied in SBJ1
1. Start up
and system
initialization
3. PD and forehead
rest adjustment
2.1 AUTOREF Data
2.2 LM Data
5. Data comparison
6. Print and/or data to PC
4.1 Preset program
4.2 Individual Exam.
Basic Flow
turn on the RVll power box
turn on the chart instruments
L40P RG24RT
Dot matrix LED
indicates
Data receive
To receive data
press
To transfer data, press/touch
- Speedy K2 - touch screen
- Speedy i/iK - press
- Retinomax - press
to trasnfer data, press
of LM screen
select COM by setting menu if
LINK indicated on LM screen
Dot matrix LED
indicates
Data receive
To receive data
press
to start, status should
be SBJ1 or SBJ2
press press select program
on control box
screen, then
touch SET for
start
press BACK
return to
previous
press NEXT
for next step
turn jog dial for adjust
2. Data transfer
turn jog dial for
PD adjust
turn dial and set the corneal
vertex distance
VD:12mm
VD:13.75mm
press PD
press R or L
To adjust split PD
press OFF
to exit PD
press SBJ1,
if in other
status
turn jog dial for
PD adjust
4. Exam
Program NP3S Pola RG
Prog1(editable) Yes Yes Yes
Prog2(editable) Yes Yes Yes
Speedy Yes Yes Yes
21point No No No
MCH No No No
- changed communication
setting and saved
After change of chart instrument, in the program menu screen, touch RESET to show SET and EDIT
RVII Quick Reference
Operation by Remote Control (RC)
Main Menu
Initial Setting
Simple Setting
Eye Exam
Program Edit
Factory Default
Back to previous
RVll R3 ver.2
SET IN
Press
SET
Blinking
for set
Press R,L,S,C,A to set
the value
Press SET IN,
to set the lens
Press to cancel SET IN
SET IN function is equipped after ver.3.02.01.

4.2.2 Red Green Test
4.2.3 Cross Cylinder – Auto / Manual
4.2.4 Extra Cross Cylinder (EXC)
4.2.5 Near Point Test
6. Printout/Data to PC/Data Clear5. Data Comparison
If “0” is clearer, proceed to turn jog dial +.
If “EXC” is clearer, press C (default 1.0D).
If “0” and “EXC” look same, press A (default 0.5D)
4.2.1 Astigmatism EXAM.
press chart
key and show
the cross dot
chart
Extra Cross Cylinder (EXC) is for: when the result of Cyl was 0 or use ref data, but considered
need to check residual astigmatism, proceed EXC.
turn jog dial
to +2.0 or
else for
fogging
press A,
ask "any
line look
sharper
than
others?"
turn jog dial
to the axis
(line number
of most clear
look x 30
degree)
press chart
key and
show
astigmatism
chart
press VA chart
key Example
0.5 (40/20)
press C turn jog dial
to - 0.25 until
every lines
look equally
sharp
Press R or L
press S
Press R or L
press
SBJ1
for
exam
turn jog dial
to - until a
line look
most clear
Press for print all the data. Data remains
after printing.
Available by setting: PRINT/PC/ PRINT+PC
press one of the button,
which make blinking, to
show the data
measured data in SBJ1 copy
to SBJ2 for adjustment Clear the indicated data only (Remote
control)
Press R or L
e.g. 1.0(40/20)
show VA chart
press EXC
press
SBJ1
for
exam
press
SBJ1
for
exam
set the rod and the
near point chart.
select the cross-
grid chart of the
near point chart
press ask patient
which lines
look clearer
select
auxiliary lens
for both right
and left
horizontal lines:
turn to +
vertical lines: turn to -
make both lines equally clear
press
OFF to
exit
converge
press
patient answers
right/left from patient
up/down
right up/left down
right down/left up
Show this
chart
Press R or L
press S press Red
Green chart
KEY, to show
R/G chart
turn jog dial to
the 1 step to the
color of answer Ask again turn the same way, and
continue the both color
look in the same level
press
SBJ1
for
exam ask which
looks clearer
Press
AUTO
turn jog dial to
the same color
direction
(Not by right or
left)
press A or C
or
For
Axis
For
Power
press 1 & 2, ask patient
which chart is clearer
turn toward the
number of
answer; patient
sees better
Press
A or C or
For
Axis
For
Power
By turning jog dial to +, cylinder lens moves:
0⇔EXC180⇔0⇔EXC90⇔0⇔EXC45⇔0⇔EXC135⇔0
step2step1 step3 step4
Ask patient which is clearer “0” or next
“EXC” follow from step 1 to 4.