
FIREWOOD
STORAGE BRACKET
USER GUIDE
RHLOGBRKT
Thank you for purchasing the Right Hand™ Firewood Storage Bracket. This User Guide is intended to
provide you with guidelines to ensure that operation of this product is safe and does not pose risk to
the user. Any use that does not conform to the guidelines described in this User Guide may void the
limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is
intended for household use only.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions.
See warranty for details.
Safety Precautions
• This bracket should only be assembled by a responsible adult. Keep away from children
while assembling.
• The tools used to assemble the bracket can be dangerous if not used properly. Be sure to familiarize
yourself with them before attempting to assemble this product.
• Be sure to place the bracket in the location where you intend to use it before loading firewood,
otherwise it will be too heavy and dangerous to move.
Package Contents
• 2x log storage brackets
• User guide
™
Required Tools
• 6x wooden beams
• 24x screws
• Drill or screwdriver
Assembly
1. Place a wooden beam horizontally into each slot on the bottom of one bracket. Then slide the other
end of each beam into the corresponding slot on the second bracket.
2. Drill a screw into each round hole in the bracket. This will secure the beams in place.
3. Place two additional beams vertically into each slot on the top of each bracket.
4. Drill a screw into each round hole in the bracket to secure them in place.
5. Stack your firewood as needed.
NOTE: The assembled bracket should look like the illustration below.