Rigol DG70000 Series User manual

Guaranty and Declaration
Copyright
© 2022 RIGOL TECHNOLOGIES CO., LTD. All Rights Reserved.
Trademark Information
RIGOL®is the trademark of RIGOL TECHNOLOGIES CO., LTD.
Notices
•RIGOL products are covered by P.R.C. and foreign patents, issued and pending.
•RIGOL reserves the right to modify or change parts of or all the specifications and pricing
policies at the company's sole decision.
•Information in this publication replaces all previously released materials.
•Information in this publication is subject to change without notice.
•RIGOL shall not be liable for either incidental or consequential losses in connection with the
furnishing, use, or performance of this manual, as well as any information contained.
•Any part of this document is forbidden to be copied, photocopied, or rearranged without prior
written approval of RIGOL.
Product Certification
RIGOL guarantees that this product conforms to the national and industrial standards in China as
well as the ISO9001:2015 standard and the ISO14001:2015 standard. Other international standard
conformance certifications are in progress.
Contact Us
If you have any problem or requirement when using our products or this manual, please contact
RIGOL.
E-mail: ser[email protected]
Website:
http://www.rigol.com

Section Description Page
List of Figures............................................................................................................................... V
List of Tables.............................................................................................................................VIII
1 Safety Requirement.....................................................................................................................1
1.1 General Safety Summary...................................................................................................1
1.2 Safety Notices and Symbols.............................................................................................3
1.3 Measurement Category..................................................................................................... 3
1.4 Ventilation Requirement....................................................................................................4
1.5 Working Environment.........................................................................................................4
1.6 Care and Cleaning................................................................................................................6
1.7 Environmental Considerations.........................................................................................6
1.8 Keep Hands Clear.................................................................................................................7
2 Product Features.......................................................................................................................... 8
3 Document Overview...................................................................................................................9
4 Quick Start................................................................................................................................... 11
4.1 General Inspection.............................................................................................................11
4.2 Appearance and Dimensions.........................................................................................12
4.3 To Prepare for Use............................................................................................................. 13
4.3.1 To Connect to Power................................................................................................ 13
4.3.2 Turn-on Checkout......................................................................................................13
4.3.3 Fuse Replacement..................................................................................................... 14
4.3.4 To Set the System Language..................................................................................15
4.4 Product Overview.............................................................................................................. 15
4.4.1 Front Panel Overview............................................................................................... 15
4.4.2 Rear Panel Overview.................................................................................................19
4.4.3 User Interface Overview..........................................................................................22
4.4.4 3.5-Inch High-definition Touch Screen Overview.......................................... 24
4.5 Touch Screen Gestures.....................................................................................................28
4.5.1 Tap...................................................................................................................................28
4.5.2 Pinch&Stretch............................................................................................................. 29
4.5.3 Drag................................................................................................................................29
4.6 Parameter Setting Method.............................................................................................30
4.7 To Use the Built-in Help System....................................................................................34
4.8 To View the Option Information and the Option Installation............................ 34
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
I

5 Project Management................................................................................................................36
6 Waveform Editing and Management................................................................................. 40
6.1 Basic Waveform Editor.....................................................................................................41
6.2 Table Editor.......................................................................................................................... 44
6.2.1 New Waveform...........................................................................................................45
6.2.2 Table Management................................................................................................... 45
6.3 Advanced Editor (Optional)............................................................................................47
6.4 High Speed Serial Editor (Optional)............................................................................50
6.4.1 Pattern........................................................................................................................... 51
6.4.2 Transmitter...................................................................................................................53
6.5 Marker....................................................................................................................................54
6.6 Waveform Management..................................................................................................55
7 Sequence Editing and Management (Optional).............................................................59
7.1 New Sequence.................................................................................................................... 59
7.2 Output Rules........................................................................................................................62
7.2.1 Wait................................................................................................................................ 63
7.2.2 Go To..............................................................................................................................63
7.2.3 Loop............................................................................................................................... 64
7.2.4 Event Jump To.............................................................................................................64
7.2.5 Force Jump...................................................................................................................65
7.3 Pattern Jump........................................................................................................................66
7.4 Viewing Sequence Editor................................................................................................ 68
7.5 Sequence Editing Tools....................................................................................................69
7.6 Sequence Management...................................................................................................69
8 Modulation..................................................................................................................................72
8.1 Modulating Waveform.....................................................................................................72
8.2 Modulated Waveform Management.......................................................................... 74
9 Channel Management............................................................................................................. 77
9.1 Adding Resources to Channel.......................................................................................77
9.2 Run Mode and Trigger Source...................................................................................... 79
9.3 Common Operations........................................................................................................80
9.4 Channel Output Control..................................................................................................80
10 Clock Setup..................................................................................................................................82
10.1 Clock and Reference Sources.........................................................................................82
10.2 Jitter Reduction...................................................................................................................84
10.3 Sample Rate and Sample Clock....................................................................................85
10.4 Clock Output....................................................................................................................... 86
DG70000 User Guide
II
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

11 Channel Setup............................................................................................................................ 87
11.1 Resolution.............................................................................................................................88
11.2 Real Waveform....................................................................................................................89
11.3 IQ Waveform (Optional).................................................................................................. 90
11.4 DAC Mode............................................................................................................................92
11.5 Output Settings..................................................................................................................93
12 Output Setup.............................................................................................................................. 95
13 Trigger Setup...............................................................................................................................98
14 Synchronization Setup.......................................................................................................... 100
15 Skew Setup................................................................................................................................102
16 IQ Impairment..........................................................................................................................104
17 Storage Management............................................................................................................106
18 Import/Export.......................................................................................................................... 109
19 System Utility Function Setting..........................................................................................114
19.1 I/O Setting..........................................................................................................................114
19.2 Basic Settings....................................................................................................................116
19.3 About this Instrument....................................................................................................118
19.4 Screen Saver......................................................................................................................119
19.5 Email.....................................................................................................................................119
19.6 Screen Capture.................................................................................................................120
19.7 Option................................................................................................................................. 120
20 Upgrade......................................................................................................................................121
21 AFG Mode..................................................................................................................................122
21.1 Continuous Mode............................................................................................................123
21.1.1 Sine Wave...................................................................................................................124
21.1.2 Square Wave.............................................................................................................125
21.1.3 Ramp Wave............................................................................................................... 127
21.1.4 Pulse.............................................................................................................................128
21.1.5 Noise............................................................................................................................130
21.2 Burst Mode........................................................................................................................131
21.2.1 Burst Type.................................................................................................................. 132
21.2.2 Burst Count............................................................................................................... 133
21.2.3 Burst Delay................................................................................................................ 133
21.2.4 Burst Phase................................................................................................................133
21.2.5 Burst Period...............................................................................................................133
21.2.6 Trigger Source.......................................................................................................... 134
21.2.7 Burst Idle Level.........................................................................................................134
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
III

21.3 Modulation Mode........................................................................................................... 134
21.3.1 Amplitude Modulation (AM)...............................................................................135
21.3.2 Frequency Modulation (FM)................................................................................137
21.3.3 Phase Modulation (PM)........................................................................................ 138
21.3.4 Amplitude Shift Keying (ASK)............................................................................. 139
21.3.5 Frequency Shift Keying (FSK).............................................................................. 140
21.3.6 Phase Shift Keying (PSK).......................................................................................141
21.4 Sweep Mode..................................................................................................................... 141
21.4.1 Sweep Type............................................................................................................... 142
21.4.2 Start Frequency and Stop Frequency...............................................................143
21.4.3 Center Frequency and Frequency Span...........................................................144
21.4.4 Sweep Time...............................................................................................................145
21.4.5 Start/Stop Hold Time.............................................................................................145
21.4.6 Return Time...............................................................................................................145
21.4.7 Sweep Trigger Source............................................................................................146
21.5 Channel Setup.................................................................................................................. 146
21.6 Clock Setup........................................................................................................................148
21.7 AFG Storage Management...........................................................................................149
21.8 AFG Upgrade.....................................................................................................................150
22 Remote Control........................................................................................................................151
22.1 Remote Control via USB................................................................................................152
22.2 Remote Control via LAN............................................................................................... 152
22.3 Remote Control via GPIB.............................................................................................. 153
23 Factory Defaults.......................................................................................................................155
24 Troubleshooting...................................................................................................................... 162
25 Appendix....................................................................................................................................164
25.1 Appendix A: Options and Accessories..................................................................... 164
25.2 Appendix B: Warranty.................................................................................................... 164
DG70000 User Guide
IV
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

List of Figures
Figure 4.1 Front Elevation .....................................................................................................12
Figure 4.2 Side Elevation .......................................................................................................12
Figure 4.3 Connecting to Power ......................................................................................... 13
Figure 4.4 Fuse Replacement ...............................................................................................14
Figure 4.5 Front Panel ............................................................................................................ 15
Figure 4.6 Rear Panel ..............................................................................................................19
Figure 4.7 User Interface .......................................................................................................22
Figure 4.8 Smart and Quick-Responsive Keyboard Menu .........................................25
Figure 4.9 Flip Screen Adjustment Interface .................................................................. 27
Figure 4.10 Tap Gesture .........................................................................................................29
Figure 4.11 Pinch&Stretch Gesture ....................................................................................29
Figure 4.12 Drag Gesture ......................................................................................................30
Figure 4.13 English Input Interface ....................................................................................31
Figure 4.14 Chinese Input Interface .................................................................................. 32
Figure 4.15 Numeric Keypad ................................................................................................33
Figure 5.1 Project Interface .................................................................................................. 36
Figure 5.2 Waveform Preview Area ................................................................................... 38
Figure 6.1 Waveform Editing and Management Interface ........................................40
Figure 6.2 "Assign to channel" Menu ............................................................................... 41
Figure 6.3 "Table Editor" Menu ...........................................................................................45
Figure 6.4 "Generate New Waveform" Menu ................................................................ 45
Figure 6.5 "Table Editor" Menu ...........................................................................................46
Figure 6.6 Advanced Editor Menu ..................................................................................... 47
Figure 6.7 High Speed Serial Editor Menu ......................................................................51
Figure 6.8 Pattern Setting Interface .................................................................................. 51
Figure 6.9 "Transmitter" Menu ............................................................................................53
Figure 6.10 Waveform List ....................................................................................................55
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
V

Figure 6.11 Resource List Menu ..........................................................................................57
Figure 7.1 Sequence Editing and Management Interface .........................................59
Figure 7.2 Creating an Empty Sequence ..........................................................................60
Figure 7.3 Creating a Track ...................................................................................................61
Figure 7.4 Adding Resources to Track .............................................................................. 61
Figure 7.5 "Rule Setting" Menu .......................................................................................... 62
Figure 7.6 "Sequence Setting" Menu ................................................................................65
Figure 7.7 "Sequence Setting" Menu ................................................................................66
Figure 7.8 Sequence Editor Default Style ........................................................................68
Figure 7.9 Switching Display Style ..................................................................................... 68
Figure 7.10 Sequence List .....................................................................................................70
Figure 8.1 Modulation Interface .........................................................................................72
Figure 8.2 Constellation diagram of 8PSK ...................................................................... 73
Figure 8.3 Modulation List ....................................................................................................74
Figure 9.1 CH1 Operation Interface .................................................................................. 77
Figure 9.2 "Resource List" Menu ........................................................................................ 78
Figure 10.1 "Clock Setting" Menu ......................................................................................82
Figure 11.1 Channel Labels .................................................................................................. 87
Figure 11.2 "Channel Setting" Menu ................................................................................ 88
Figure 12.1 "Output Option" Menu ...................................................................................95
Figure 13.1 Trigger Setting Menu ...................................................................................... 98
Figure 14.1 Sync Labels ....................................................................................................... 100
Figure 14.2 Sync Setting Menu .........................................................................................100
Figure 14.3 All Channels Synchronized ..........................................................................100
Figure 15.1 Skew Setting Menu of Analog Outputs ..................................................102
Figure 15.2 Skew Setting Menu of Marker Outputs ..................................................103
Figure 16.1 "IQ Impairment" Menu .................................................................................104
Figure 17.1 "Storage" Menu .............................................................................................. 106
Figure 18.1 Import/Export Menu .....................................................................................109
DG70000 User Guide
VI
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Figure 18.2 Import Wave Menu ....................................................................................... 110
Figure 18.3 Import Sequence Menu ...............................................................................111
Figure 18.4 Export Waveform Menu ...............................................................................112
Figure 18.5 Export Sequence Menu ................................................................................112
Figure 19.1 Screen Saver .....................................................................................................119
Figure 21.1 AFG Mode Interface ......................................................................................122
Figure 21.2 Continuous Mode Interface ....................................................................... 123
Figure 21.3 Burst Mode Interface ....................................................................................132
Figure 21.4 Modulation Mode Interface .......................................................................135
Figure 21.5 Sweep Mode Interface ................................................................................. 142
Figure 21.6 Linear Sweep ....................................................................................................142
Figure 21.7 Logarithmic Sweep ........................................................................................143
Figure 21.8 Step Sweep .......................................................................................................143
Figure 21.9 "Channel Setting" Menu ..............................................................................146
Figure 21.10 Channel Quick Setup Menu .....................................................................147
Figure 21.11 "Storage" Menu ............................................................................................150
Figure 22.1 Search for the Available Device .................................................................154
Figure 22.2 Confirm the Available Device .....................................................................154
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
VII

List of Tables
Table 11.1 Correspondence of Marker to Output Port ...............................................89
Table 23.1 Factory Settings ................................................................................................ 155
DG70000 User Guide
VIII
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

1Safety Requirement
1.1 General Safety Summary
Please review the following safety precautions carefully before putting the instrument
into operation so as to avoid any personal injury or damage to the instrument and
any product connected to it. To prevent potential hazards, please follow the
instructions specified in this manual to use the instrument properly.
• Use the SMA Output Connectors Properly.
The front-panel and SMA output connectors only allow signal output but unable
to support signal input.
• Use Proper Power Cord.
Only the exclusive power cord designed for the instrument and authorized for
use within the destination country could be used.
• Ground the Instrument.
The instrument is grounded through the Protective Earth lead of the power cord.
To avoid electric shock, it is essential to connect the earth terminal of the power
cord to the Protective Earth terminal before connecting any inputs or outputs.
• Observe All Terminal Ratings.
To avoid fire or shock hazard, observe all ratings and markers on the instrument
and check your manual for more information about ratings before connecting
the instrument.
• Use Proper Overvoltage Protection.
Ensure that no overvoltage (such as that caused by a bolt of lightning) can reach
the product. Otherwise, the operator might be exposed to the danger of an
electric shock.
• Do Not Operate Without Covers.
Do not operate the instrument with covers or panels removed.
• Do Not Insert Objects Into the Air Outlet.
Do not insert objects into the air outlet, as doing so may cause damage to the
instrument.
• Use the Proper Fuse.
Please use the specified fuses.
• Avoid circuit or wire exposure.
Do not touch exposed junctions and components when the instrument is
powered on.
Safety Requirement
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
1

• Do Not Operate With Suspected Failures.
If you suspect damage occurs to the instrument, have it inspected by RIGOL
authorized personnel before further operations. Any maintenance, adjustment or
replacement especially to circuits or accessories must be performed by RIGOL
authorized personnel.
• Keep Well Ventilation.
Inadequate ventilation may cause an increase of temperature in the instrument,
which would cause damage to the instrument. So please keep the instrument
well ventilated and inspect the air outlet and the fan regularly.
• Do Not Operate in Wet Conditions.
To avoid short circuit inside the instrument or electric shock, never operate the
instrument in a humid environment.
• Do Not Operate in an Explosive Atmosphere.
To avoid personal injuries or damage to the instrument, never operate the
instrument in an explosive atmosphere.
• Keep Instrument Surfaces Clean and Dry.
To avoid dust or moisture from affecting the performance of the instrument,
keep the surfaces of the instrument clean and dry.
• Prevent Electrostatic Impact.
Operate the instrument in an electrostatic discharge protective environment to
avoid damage induced by static discharges. Always ground both the internal and
external conductors of cables to release static before making connections.
• Use the Battery Properly.
Do not expose the battery (if available) to high temperature or fire. Keep it out of
the reach of children. Improper change of a battery (lithium battery) may cause
an explosion. Use the RIGOL specified battery only.
• Handle with Caution.
Please handle with care during transportation to avoid damage to keys, knobs,
interfaces, and other parts on the panels.
WARNING
Equipment meeting Class A requirements may not offer adequate protection to broadcast
services within residential environment.
Safety Requirement
DG70000 User Guide
2
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

1.2 Safety Notices and Symbols
Safety Notices in this Manual:
WARNING
Indicates a potentially hazardous situation or practice which, if not avoided, will result in
serious injury or death.
CAUTION
Indicates a potentially hazardous situation or practice which, if not avoided, could result
in damage to the product or loss of important data.
Safety Symbols on the Product:
• DANGER
It calls attention to an operation, if not correctly performed, could result in injury
or hazard immediately.
• WARNING
It calls attention to an operation, if not correctly performed, could result in
potential injury or hazard.
• CAUTION
It calls attention to an operation, if not correctly performed, could result in
damage to the product or other devices connected to the product.
Safety Symbols on the Product:
Hazardous
Voltage
Safety Warning Protective Earth
Terminal
Chassis Ground Test Ground
1.3 Measurement Category
Measurement Category
This instrument can make measurements in Measurement Category I.
WARNING
This instrument can only be used for measurements within its specified measurement
categories.
Safety Requirement
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
3

Measurement Category Definitions
• Measurement category I is for measurements performed on circuits not directly
connected to MAINS. Examples are measurements on circuits not derived from
MAINS, and specially protected (internal) MAINS derived circuits. In the latter
case, transient stresses are variable. Thus, you must know the transient withstand
capability of the equipment.
• Measurement category II is for measurements performed on circuits directly
connected to low voltage installation. Examples are measurements on household
appliances, portable tools and similar equipment.
• Measurement category III is for measurements performed in the building
installation. Examples are measurements on distribution boards, circuit-breakers,
wiring (including cables, bus-bars, junction boxes, switches and socket-outlets) in
the fixed installation, and equipment for industrial use and some other
equipment. For example, stationary motors with permanent connection to a
fixed installation.
• Measurement category IV is for measurements performed at the source of a
low-voltage installation. Examples are electricity meters and measurements on
primary overcurrent protection devices and ripple control units.
1.4 Ventilation Requirement
This instrument uses a fan to force cooling. Please make sure that the air inlet and
outlet areas are free from obstructions and have free air. When using the instrument
in a bench-top or rack setting, provide at least 10 cm clearance beside, above and
behind the instrument for adequate ventilation.
CAUTION
Inadequate ventilation may cause an increase of temperature in the instrument, which
would cause damage to the instrument. So please keep the instrument well ventilated and
inspect the air outlet and the fan regularly.
1.5 Working Environment
Temperature
Operating: 0℃ to +50℃
Non-operating: -30℃ to +70℃
Humidity
• Operating:
Below +30℃: ≤90%RH (without condensation)
+30℃ to +40℃: ≤75% RH (without condensation)
Safety Requirement
DG70000 User Guide
4
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

+40℃ to +50℃: ≤45%RH (without condensation)
• Non-operating:
Below +65℃: ≤90%RH (without condensation)
WARNING
To avoid short circuit inside the instrument or electric shock, never operate the
instrument in a humid environment.
Altitude
• Operating: below 3 km
• Non-operating: below 15 km
Protection Level Against Electric Shock
ESD ±8kV
Installation (Overvoltage) Category
This product is powered by mains conforming to installation (overvoltage) category II.
WARNING
Ensure that no overvoltage (such as that caused by a bolt of lightning) can reach the
product. Otherwise, the operator might be exposed to the danger of an electric shock.
Installation (Overvoltage) Category Definitions
Installation (overvoltage) category I refers to signal level which is applicable to
equipment measurement terminals connected to the source circuit. Among these
terminals, precautions are done to limit the transient voltage to a low level.
Installation (overvoltage) category II refers to the local power distribution level which
is applicable to equipment connected to the AC line (AC power).
Pollution Degree
Pollution Degree 2
Pollution Degree Definition
• Pollution Degree 1: No pollution or only dry, nonconductive pollution occurs.
The pollution has no effect. For example, a clean room or air-conditioned office
environment.
• Pollution Degree 2: Normally only nonconductive pollution occurs. Temporary
conductivity caused by condensation is to be expected. For example, indoor
environment.
• Pollution Degree 3: Conductive pollution or dry nonconductive pollution that
becomes conductive due to condensation occurs. To be found in industrial
Safety Requirement
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
5

environment or construction sites (harsh environments). For example, sheltered
outdoor environment.
• Pollution Degree 4: The pollution generates persistent conductivity caused by
conductive dust, rain, or snow. For example, outdoor areas.
Safety Class
Class 1 – Grounded Product
1.6 Care and Cleaning
Care
Do not store or leave the instrument where it may be exposed to direct sunlight for
long periods of time.
Cleaning
Clean the instrument regularly according to its operating conditions.
1. Disconnect the instrument from all power sources.
2. Clean the external surfaces of the instrument with a soft cloth dampened with mild
detergent or water. Avoid having any water or other objects into the chassis via the
heat dissipation hole. When cleaning the LCD, take care to avoid scarifying it.
CAUTION
To avoid damage to the instrument, do not expose it to caustic liquids.
WARNING
To avoid short-circuit resulting from moisture or personal injuries, ensure that the
instrument is completely dry before connecting it to the power supply.
1.7 Environmental Considerations
The following symbol indicates that this product complies with the WEEE Directive
2002/96/EC.
The equipment may contain substances that could be harmful to the environment or
human health. To avoid the release of such substances into the environment and
avoid harm to human health, we recommend you to recycle this product
appropriately to ensure that most materials are reused or recycled properly. Please
contact your local authorities for disposal or recycling information.
Safety Requirement
DG70000 User Guide
6
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

You can click on the following link https://int.rigol.com/services/services/declaration
to download the latest version of the RoHS&WEEE certification file.
1.8 Keep Hands Clear
WARNING
While the main screen is opening or closing, keep hands clear from the inclination angle
between the main screen and its instrument body to avoid being pinched.
Safety Requirement
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
7

2Product Features
Product Features
•Up to 5 GSa/s sample rates (12 GSa/s interpolated)
•4-channel synchronization for a single instrument
•-70 dBc SFDR
•16-bit vertical resolution
•1.5 GSample waveform memory depth per channel
•Direct generation of signals with carriers up to 5 GHz
•Generate arbitrary waveforms point by point; recover the signal without
distortion
•Total jitter low as 10 psp-p, random jitter low as 350 fsrms
•Sample rates adjustable from 100 Sa/s to 12 GSa/s
•High-precision synchronization with channel-to-channel skew time low as ± 10
ps
•Support advanced sequence to define outputs of various complex waveforms
•Multiple interfaces available: LAN, USB3.0, HDMI
•Support the import of external waveform files
•15.6-inch angle-adjustable display
Built on its unique SiFi III technical platform and Android operating system, the
DG70000 series Arbitrary Waveform Generator (AWG) has the following advantages:
accurate and adjustable sample rates; generate arbitrary waveforms point by point;
recover the signal without distortion; etc. This series is customer-oriented with a
variety of functions suitable for practical applications. For example, the creation of
advanced sequences enables you to self-define long complex waveforms. The multi-
channel high-precision synchronization, high-bandwidth and low-jitter waveform
output make it ready for applications in a variety of industrial and communications
fields. Equipped with a 15.6-inch angle-adjustable touch screen supporting multi-
pane windowing, it brings a brand new UI design and extraordinary user experience.
Multiple standard interfaces provide you with more solutions in connectivity,
making it simple to control the instrument remotely.
Product Features
DG70000 User Guide
8
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

3Document Overview
This manual gives you a quick overview of the front and rear panel, user interface as
well as basic operation methods of DG70000 series.
TIP
For the newest version of this manual, download it from RIGOL official website
( www.rigol.com ).
Publication Number
UGB13100-1110
Format Conventions in this Manual
1. Key
The front panel key is denoted by the menu key icon. For example,
indicates the "Default" key.
2. Menu
The menu item is denoted by the format of "Menu Name (Bold) + Character
Shading" in the manual, for example, Setup.
3. Operation Procedures
The next step of the operation is denoted by ">" in the manual. For example,
> Storage indicates first clicking or tapping the icon and then clicking or
tapping Storage.
4. Knob
Label Knob Label Knob
Channel
Channel
ON/OFF Trigger Interval/
Screen Tilt Adjustment
Trigger Interval/
Screen Tilt
Adjustment Knob
Amplitude
Amplitude
Knob Offset Offset Knob
Content Conventions in this Manual
DG70000 series Arbitrary Waveform Generator (AWG) includes the following models.
Unless otherwise specified, this manual takes DG70004 as an example to illustrate the
functions and operation methods of DG70000 series.
Document Overview
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DG70000 User Guide
9

Model Number of Channels Maximum Output
Frequency
DG70004 4 5 GHz
Document Overview
DG70000 User Guide
10
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.