RIKA PRIMO RAO User manual

Operating manual
PRIMO RAO
PRIMO PGI*
*PGI not for Germany and Austria

2
TABLE OF CONTENTS
1. PREFACE 4
Explanations to symbols..................................................................................................................................................................................................4
Packaging......................................................................................................................................................................................................................................4
Electrical connection...........................................................................................................................................................................................................4
Electronic Waste......................................................................................................................................................................................................................4
2. GUARANTEE CONDITIONS 5
3. WARRANTY CONDITIONS 5
4. INSTRUCTIONS FOR COMMISSIONING PROTOCOL 6
Operator instruction ............................................................................................................................................................................................................6
5. PRIMO RAOPGI 6 KW 8
Spare part overview exploded diagram PRIMO RAO/PGI 6 kW ................................................................................................... 8
Flue pipe connection top - RAO ................................................................................................................................................................................11
Flue pipe connection top - PGI*.................................................................................................................................................................................11
Spare part overview article numbers PRIMO RAO/PGI 6 kW.........................................................................................................12
Dimensions of PRIMO RAO/PGI 6 kW.................................................................................................................................................................. 14
Amount of Fuel........................................................................................................................................................................................................................ 14
Technical data for PRIMO RAO/PGI 6 kW........................................................................................................................................................ 14
6. PRIMO RAOPGI 8 KW 16
Spare part overview exploded diagram PRIMO RAO/PGI 8 kW.................................................................................................. 16
Flue pipe connection top - RAO .............................................................................................................................................................................. 19
Flue pipe connection top - PGI*............................................................................................................................................................................... 19
Spare part overview article numbers PRIMO RAO/PGI 8 kW .......................................................................................................20
Dimensions of PRIMO RAO/PGI 8 kWI.................................................................................................................................................................22
Amount of Fuel........................................................................................................................................................................................................................22
Technical data for PRIMO RAO/PGI 8 kW........................................................................................................................................................22
7. IMPORTANT INFORMATION 24
General warning and safety information ...................................................................................................................................................... 24
First heating.............................................................................................................................................................................................................................. 24
Safety distances ................................................................................................................................................................................................................... 24
Prior to set up...........................................................................................................................................................................................................................25
The correct chimney connection ...........................................................................................................................................................................25
Convection air conduction ..........................................................................................................................................................................................25
8. INSTALLING THE STOVE 26
Connection to the chimney........................................................................................................................................................................................ 26
Connecting to a steel chimney ............................................................................................................................................................................... 26
Combustion air...................................................................................................................................................................................................................... 26
Feeding in external combustion air.................................................................................................................................................................... 26
9. BRIEF INFORMATION ON FUEL  PELLETS 27
What are pellets?...................................................................................................................................................................................................................27
Wood pellet specification according to ENplus – A1 ............................................................................................................................27
Pellet container refilling during operation.....................................................................................................................................................27
Pellet storage............................................................................................................................................................................................................................27
10. TECHNOLOGY AND SAFETY FUNCTIONS 28
Operating comfort...............................................................................................................................................................................................................28
Top efficiency - lowest emissions...........................................................................................................................................................................28
DAR - Dynamic Air Regulation..................................................................................................................................................................................28
Pressure monitoring ...........................................................................................................................................................................................................28
Low-temperature shutdown .......................................................................................................................................................................................28
Electrical excess current protection ...................................................................................................................................................................28
Automatic cleaning cycle..............................................................................................................................................................................................28
Component monitoring ..................................................................................................................................................................................................28
Power failure (during heating)..................................................................................................................................................................................28
Power failure (during the initial stage)..............................................................................................................................................................28

|3
2
EN
11. COMFORT OPTIONS 29
Interface for various options..................................................................................................................................................................................... 29
Room sensor, Radio room sensor.......................................................................................................................................................................... 29
External room thermostat ........................................................................................................................................................................................... 29
External connection cable bridge........................................................................................................................................................................ 29
12. USER INTERFACE  MENU NAVIGATION 30
First steps....................................................................................................................................................................................................................................30
Control...........................................................................................................................................................................................................................................30
Display ...........................................................................................................................................................................................................................................30
LED status indicator..........................................................................................................................................................................................................30
13. OPERATING MODES 31
Manual mode............................................................................................................................................................................................................................ 31
Comfort mode ......................................................................................................................................................................................................................... 31
Standby.......................................................................................................................................................................................................................................... 31
Cleaning (hourly)................................................................................................................................................................................................................... 31
Reset - Factory settings.................................................................................................................................................................................................. 31
Heating up without electric ignition .................................................................................................................................................................... 31
14. OPTIONS 32
RIKA room sensor................................................................................................................................................................................................................. 32
MULTIAIR fan............................................................................................................................................................................................................................ 32
Child-proof lock .................................................................................................................................................................................................................... 32
15. WARNINGS 33
16. ERROR MESSAGES 33
17. MAINTENANCE 35
Cleaning painted surfaces.......................................................................................................................................................................................... 35
Open the combustion chamber door ............................................................................................................................................................... 35
Cleaning the door glass................................................................................................................................................................................................. 35
Cleaning the flame temperature sensor........................................................................................................................................................ 35
Cleaning of the burn pot............................................................................................................................................................................................... 35
18. CLEANING 36
Cleaning the flue gas channels and flue gas collecting duct ....................................................................................................36
Cleaning the convection air openings..............................................................................................................................................................37
Combustion air - intake..................................................................................................................................................................................................37
Cleaning the pellet container................................................................................................................................................................................... 38
Checking bearings.............................................................................................................................................................................................................38
Checking seals....................................................................................................................................................................................................................... 38
Cleaning the flue pipes ..................................................................................................................................................................................................38
Reset - Cleaning interval ..............................................................................................................................................................................................38
19. PROBLEMS  POSSIBLE SOLUTIONS 39
Problem 1......................................................................................................................................................................................................................................39
Problem 2.....................................................................................................................................................................................................................................39
Problem 3 ....................................................................................................................................................................................................................................39

4
1. PREFACE
Explanations to symbols
...Important note
#25
...Hexalobular T25 ...Allen key #4
...Useful tip
#8
...Hex #8
Packaging
Your first impression is important to us!
The packaging of your new stove provides excellent protection
against damage. However damage to the stove and accessories
may still occur during transport.
Note
Therefore please check your stove on receipt for damage and
completeness! Report any deficiencies to your dealer immediately!
Pay particular attention during unpacking that the stone panels
remain intact. Scratches to the material can easily occur. Stone
panels are excluded from the warrant.
The packaging of your new stove is environmentally neutral to a
great extent.
Tip
The wood used in the packaging has not been surface treated.
The cardboard and film (PE) can be disposed of via the municipal
waste collection for recycling.
Electrical connection
The stove is supplied with an approx. 2m long connecting cable with
a Euro-plug. This cable is to be connected to a 230Volt/50Hz socket.
The average electrical power consumption is some 20 Watt in
heating operation. And approx. 150 Watt during automatic ignition.
The connection cable must be laid so that there is no contact to any
sharp edges or hot surfaces of the stove.
Electronic Waste
RIKA Innovative Ofentechnik GmbH is ensuring that its products
are eco-friendly throughout the product life cycle. This is why our
commitment for electronic products goes beyond the end of their
product life cycle. In accordance with the European Directive
(2012/19/EU) Waste Electrical and Electronic Equipment (WEEE)
and other local regulations, RIKA supports the setup of take-back
systems and recycling infrastructures.
Old devices can easily be returned to the municipal waste collectors
for recycling purposes.
Please observe the national regulations to that end.
The device may not be disposed of in the normal household waste.

|5
4
EN
2. GUARANTEE CONDITIONS
We recommend having the installation performed by a RIKA-certified technician.
These guarantee conditions only apply for the European mainland. For all other countries, the separate conditions of the
importer in the respective country apply. In cases of doubt, or in the case of missing or incorrect translations, the German
version is always the sole valid version.
In the interest of ensuring damage limitation in good time, the guarantee claim should be sent in writing to the RIKA specialist
or contract dealer.
In this event, the following documents must be presented:
• Written reason for complaint
• Invoice
• Installation record
• Model name and serial number
RIKA GUARANTEE
5 YEARS
on the welded stove body.
Up to 5 years or 10,000 kg of consumed pellets for pellet stoves.
This relates exclusively to defects in the material and processing, and to the supply of replacement parts free of charge.
Working hours and travel times are not covered by the manufacturer’s guarantee.
The guarantee is conditional on the following:
• Only original parts supplied by the manufacturer must be used.
• Professional installation of the stove in compliance with the respective operating manual valid at the time of purchase.
• The stove must be connected by a professional certified for that type of stove.
• The installation is performed by a RIKA-certified technician.
If these points are not complied with, the guarantee claim is void!
Any costs incurred by the manufacturer as a result of an unjustified guarantee claim will be charged back to the claimant.
Likewise excluded from the guarantee is any damage resulting from or caused by non-compliance with the manufacturer‘s
instructions for operating the appliance, e.g. overheating, use of non-approved fuels, unprofessional interference with
the appliance or the flue pipe, a flue suction that is incorrectly adjusted to the appliance or is insufficient or too strong,
condensation water, non-performance of or inadequate maintenance or cleaning, non-compliance with the applicable
building regulations, improper operation by the operator or third parties, transport and handling damage.
STATUTORY WARRANTY PROVISIONS REMAIN UNAFFECTED BY THE GUARANTEE!
3. WARRANTY CONDITIONS
See the respective general terms and conditions of business and warranty conditions of the RIKA dealer.
The warranty does not cover:
1. Wearing parts (normal wear and tear not resulting from a defect)
2. Parts in contact with fire, e.g. glass, combustion troughs, grates, baffle plates, deflectors, combustion chamber cladding
(e.g. refractory clay), ceramics, ignition elements, sensors, combustion chamber sensors and temperature monitors
3. Paint, surface coatings (e.g. handles, cover panels)
4. Seals
5. Natural stone, thermal stone, etc. valid from: 01.12.2020

6
4. INSTRUCTIONS FOR COMMISSIONING PROTOCOL
FOR PELLET AND COMBI STOVES
The commissioning protocol is to be treated as a documents and
serves as the basis for the warranty and guarantee terms. It is to
be completed entirely, in particular the stove data and addresses,
the work to be performed is to be ticked off after completion. The
signatories confirm with their signatures that all the items on the list
have been concluded properly.
Note
Please return 1 completed protocol for putting into service to
RIKA Innovative Ofentechnik GmbH, Müllerviertel 20, 4563
Micheldorf, Austria.
Electrical periphery
It is important that the connection socket in the electrical periphery
is earthed. The operability of any room thermostat present must
be checked. The execution of commands is to be established by
phoning in the case of a GSM modem.
Exhaust gas system
The exhaust line, stove and combustion air inlet are part of the
combustion system as a whole; therefore the correct execution must
also be checked. The plug connections should be tight in general
since the system works with excess pressure. The exhaust tube has
a diameter of 100 mm for pellet stove, and of 150 mm for the combi
stove, which is sufficient for short distances. In the case of several
changes in direction, the resistance of the exhaust system can
increase with the flue to such an extent that the combustion quality
suffers and/or noise arises from the greater flow speed. Correct
determination of the chimney draught can only be performed at
nominal thermal output and serves to evaluate the chimney. If the
draught is more than 15 Pa, then a draught limiter should be installed.
Stove functions
These are the basic stove functions that are to be checked and
ticked off. The stove is ready for operation if these functions are
ensured.
Operator instruction
This is one of the most important points in the putting into operation.
It is very important that the operator understands the stove properly
and is prepared to assume responsibility for the basic tasks required
for operational safety.
In particular the connection between special features of a biomass
heating system and his obligations as well as the warranty and
guarantee terms must be explained. e.g. non-tested pellets and screw
blockers, lack of cleaning or maintenance and stove malfunctions.
Thorough instruction can prevent many complaints.
Stove functions
Explanation of the processes in the stove during ignition, normal
operation, cleaning phase etc.
Control
Explain operator’s possibilities to intervene, empty pellet container,
room thermostat, GSM modem, functions and settings, program
times if necessary. Operating instructions: Handover and reference
to the content to the following points, is a document.
Warranty terms
Difference between warranty (statutory) and guarantee (voluntary),
terms of guarantee, determination of wearing parts, reference to
pellet quality to be used and the consequences of poor quality.
Cleaning instructions
Ash and dust occurs with a biomass heating unit. The fire trough is
to be cleaned regularly with regular heating operation (in the case
of pellet operation, the drilled air holes in particular must be free
of residues). The ash drawer is to be emptied regularly. The flue
gas pipes are to be cleaned once or twice in the heating season
depending on stove type; by a specialist company is best.
Maintenance
Note
We recommend at least once a year to have all maintenance
carried out by your RIKA dealer.
Combustion
All doors must close tightly to prevent intake of false air.

|7
6
EN
Pictures made of ACTUAL condition
Guarantee conditions described
Relay testing (component testing)
Chimney type
Differential pressure sensor (building)
Smooth operation of backfire safety flap checked (combi stove)
Function checkedGSM modem
Surname, forename
User signature
Place, date
Signature & stamp of commissioning technician
Street, number
Post-code, city
E-mail, phone
Retailer stamp
Device type
Serial number
Cladding undamaged? YES NO
Phone provider
Software version
Display version
Connection socket grounded
Model
Room thermostat
Smooth operation of flues gas flap checked (combi stove) Fire alarm in place? YES NO
Fire-proof floor covering in place? YES NO
Other
BRICKS STAINLESS STEEL FIRECLAY
Chimney diameter Chimney height
Chimney – approved by inspection authority? YES NO
Chimney system
Number of deflector plates Length of smoke pipes
Smoke pipes in connection system WITH WITHOUT SEALING LIP
Door/bricks/cladding checked and adjusted(function/gaps)
Pellet quality explained (env. standard/DIN plus/ENplus-A1)
Device function/control explained
Maintenance contract
Soot brush Thermal gloves
Door opener
Care and maintenance log available and handed over to the user
User manual explained and handed over
Year of production
Model
FIRENET
YES NO
Proper installation according to installation and user manuals
Room height
Room ventilation
Exhaust hood (outdoor connection)
WC extraction
Comments
Central vacuum cleaning system YES NO
YES NO
YES NO
YES NO
Chimney draft (full load) Outside temperature
Plaster openings YES NO
Cleaning & maintenance interval, maintenance checklist explained
Warranty conditions explained
Stove taken into operation with the client
Stove switched off and handed over
Independently of room air YES NO
YES NO
Above sea level
INDOOR OUTDOOR
YES NO
www.rika.eu Dated: 08/07/2020
COMMISSIONING REPORT
for RIKA pellet and combi stoves.
Dated 07/2020
ORIGINAL - REMAINS WITH CLIENT
Installation address RIKA retailer
Device data
Electrical peripherals
Inspection of system and safety components
Flue gas line/chimney
Device functions
Initial user instruction
Installation
RIKA Innovative Ofentechnik, 4563 Micheldorf, Müllerviertel 20, Austria, hereby confirms that the provided personal data is exclusively used for in-house purposes, processing
and recording. The client confirms the reception of correct and clear instructions. Our general terms and conditions shall apply.
I consent to the collection, saving and use of my personal data (name, address, e-mail) by RIKA Innovative Ofentechnik GmbH for marketing and information purposes.
This consent can be withdrawn at any time and without any charge and formless under [e-mail].
ATTENTION:
Compliance with national regulations and laws as well as locally applicable rules and regula-
tions is within the responsibility of the specialist contractor commissioned with installation.

8
5. PRIMO RAOPGI 6 KW
Spare part overview exploded diagram PRIMO RAO/PGI 6 kW
5
16
16
15
15
6
7
8
9
12
12
4
4
10
11
18
12
4
2
1
3
4
13
17
14
14
4
29
36
30
28
25
26
25
26
27
24
22
23
21
20
31
32
33
34
35

|9
8
EN
80
62
62
70
75
76
71
72
74
73
63
61
77
61
60
65
64
81
82
83
78
78
67
68
66
69
84
85
86
61
88
89
90
82
87
72
79
40
41
41
53
52
58
55
54
55
54
45
44
43
43
42
42
51
50
49
42
56
57
46
47
48
59

10
95
94
98
101
102
103
104
106
105
109
94
112
108
107
121
120
122
119
117
116
91
90
92
93
99
100
97
113
118
110
111
115
114
96

|11
10
EN
150
151
152
153
154
155
156
157
158
140
141
142
145
144
143
Flue pipe connection top - RAO
Flue pipe connection top - PGI*
*PGI not for Germany and Austria

12
Spare part overview article numbers PRIMO RAO/PGI 6 kW
Note: Please consider the powdercoated parts can differ slightly in colour and colour effects though they are elaborated in high quality.
Nr. Art.Nr. Description
1 Z38747 Locking bolt
2 N102946 Dowel pin
3 L03978 Lock tongue
4 N112836 Hexagon socket screw M05x10
5 L04065 Closure flap
6 Z38715 Decorative door
B19112 Decorative door assy
7 N112828 Double sealing cord
8 N103693 Flat seal black 8x2
9 Z38758 Door glass
10 N103693 Flat seal black 8x2
11 Z38759 Front door glass
12 L03976 Glass holder
13 L03979 Hinge top
14 N112836 Hexagon socket screw M05x10
15 N112879 Vis à bride SK M06x16
16 Z39314 Door stop
17 L03980 Hinge bottom
18 L03977 Glass holder bottom
20 N112387 Wing nut
21 N112509 Washer M08
22 B19111 Cleaning opening assy top
23 N112551 Round sealing strip grey D11 (1m)
24 Z38755 Baffle plate cover
25 Z39011 Baffle plate rear/front left
26 Z38756 Baffle plate rear/front right
27 Z38757 Baffle plate bottom middle
28 Z38754 Baffle plate left/right
29 Z38716 Cast rear panel black
30 Z38753 Firebrick lining right
31 Z38752 Firebrick lining left
32 Z39012 Fire trough
33 Z36566 Sealing
34 Z36000 Cleaning cover
35 N112077 Wing nut
36 Z38752 Firebrick lining left
40 N112773 Catch counterpart
41 N110606 Self-tapping screw M03x10
42 N112700 Hexagonal nut M03
43 N112144 Washer M03
44 N112772 Double ball catch
45 L02349 Lock washer
46 L04033 Switch spacer
47 N111733 Magnetic switch bottom part
48 N112878 Self-tapping screw M03x10
49 L02310 Guard plate
50 N111732 Magnetic switch top part
51 L01445 Switch spacer
52 N112240 Self-tapping screw M05x10
53 L04067 Hinge left
Nr. Art.Nr. Description
54 N111973 Hexagonal nut M05
55 Z38749 Hinge
56 L04068 Hinge right
57 N111950 Hexagonal screw M05x10
58 B19225 Container lid RAO assy
59 N112600 Container seal
60 B19009 Side casing front left/rear right
61 N111947 Self-tapping screw M05x16
62 N112820 Silicone profile
63 B19012 Side casing panel back
64 N112185 Self-tapping screw M05x10
65 Z35691 Spring plug
66 N112484 Door opener
67 Z38718 Convection cover
68 N112837 Self-tapping screw
69 Z38720 Cover frame
70 Z38543 Magnet shell
71 L04069 Holder plate
72 N111864 Grub screw
73 N107499 Hexagonal nut
74 N112499 Setscrew with pin
75 Z38723 Side casing panel right back
76 B19221 Shutter compl.
77 B19008 Side casing panel right front
78 N112240 Self-tapping screw M05x10
79 L03995 Rear wall
80 N112490 Levelling screw black
81 L03987 Cover panel, bottom
82 N112487 Washer
83 N112185 Self-tapping screw M05x10
84 LB00968 Flue gas box
B19223 Flue gas box compl.
85 N112015 Flue pipe sealing
86 Z35898 Seal plate
87 N111950 Hexagonal screw M05x10
88 Z37448 Seal
89 Z37449 Cleaning opening
90 N112419 Wing screw
100 B19115 Ceramic ignition
101 Z38751 Seal for ignition
102 Z33793 Sensor tube
103 B16114 Temperature sensor
104 N112274 Hexagonal nut M05
105 Z35096 Pressure Pipe
106 N111551 Silicon hose
107 N112102 Differential pressure switch
108 Z35183 Friction bearing Di10
109 B19117 Control panel
110 N112048 Screw 2,5x10
111 B16967 Auger

|13
12
EN
Nr. Art.Nr. Description
112 Z31674 Centring plate
113 Z35182 Friction bearing Di16
114 L03710 Retaining plate motor
115 L03711 Pressure bracket
116 Z18997 Rubber buffer
117 N112499 Setscrew with pin
118 Z11915 Lock ring conveyer screw
119 Z37701 Pressure Pipe
120 N112796 Silicon hose blue
121 N112795 Silicon hose red
122 B19113 Worm motor clocking
123 B19199 Mainboard USB20
124 N112703 Self-tapping screw M04x08
125 Z38387 IEC mains socket
126 N112040 Self-tapping screw M06x50
127 N106989 Hexagonal screw
128 N112473 Differential pressure sensor
129 N111581 Induced draft fan motor
130 N100475 Flat packing white 8x2
131 B17370 Induced draft fan housing
132 N100475 Flat packing white 8x2
B17371 Induced draft fan assy
Version RAO/PGI
140 LB00938 Cover RAO
141 N112530 Spacer
142 N112142 Flange nut
143 N112694 Hexagon socket screw
144 Z37609 Flue pipe attachments
145 Z37830 Pipe adapter seal
150 LB00939 Cover PGI
151 N112530 Spacer
152 N112142 Flange nut
153 N108395 Hexagon socket screw
154 Z38122 Seal
155 Z37190 Flange
156 Z37332 Seal
157 L03376 Cover air supply
158 N108486 Allen screw
Note: Please consider the powdercoated parts can differ slightly in colour and colour effects though they are elaborated in high quality.

14
Dimensions of PRIMO RAO/PGI 6 kW
345
139
520 496
1007
142
248
109
109
139
60
100
Dimensions RAO PGI
Height [mm] 1007 1007
Width [mm] 496 496
Corpus depth [mm] 520 520
Weight
Weight with steelshell [kg]  
Flue pipe connection
Flue pipe outlet [mm]  
Connection height [mm]  
Original angle pipe total depth [mm] - -
Original angle pipe distance to rear
wall [mm] - -
Depth from rear wall to middle of flue
pipe [mm]  
Original angle pipe side distance [mm]  
Rear connection height [mm] - -
Rear connection side distance [mm] - -
Fresh air connection
Diameter [mm]  
Connection height [mm]  
Side distance [mm]  
Amount of Fuel
Nominal
load Part load
Amount of fuel ~, kg/h* ~, kg/h*
Burn time at full pellet hopper ~14 h* ~31 h*
*Practical values may vary depending on pellet quality.
Note
Pellet consumption depends on the size of the pellets. The larger
the pellets, the slower the feed and vice versa.
Technical data for PRIMO RAO/PGI 6 kW
Technical data
Heating power range [kW] , - 
Room heating capacity (depending
on house insulation) [m]  - 
Fuel consumption [kg/h] ,
Pellet container capacity* [l]/[~kg] /~
Electric supply [V]/[Hz] /
Average electrical input [W] ~
Fuse [A] , AT
Efficiency [%] 
CO2[%] under review
CO-emission on 13% OO2[mg/mN
] 
Dust emission [mg/mN
] 
Exhaust [g/s] ~,
Exhaust temperature [°C] ~
Chimney draft requirement [Pa] 
*The capacity in kg may deviate due to different pellet bulk
densities.
The owner of small firing systems or the person authorised for the
small firing system is to keep the technical documentation and is to
submit it to the authorities or the chimney sweep on request.
Note
Please observe the national and European standards as well as
local regulations concerning the installation and operation of
firing installations!

|15
14
EN

16
6. PRIMO RAOPGI 8 KW
Spare part overview exploded diagram PRIMO RAO/PGI 8 kW
5
16
16
15
15
6
7
8
9
12
12
4
4
10
11
18
12
4
2
1
3
4
13
17
14
14
4
29
36
30
28
25
26
25
26
27
24
22
23
21
20
31
32
33
34
35

|17
16
EN
81
62
62
69
72
77
78
73
74
76
75
63
61
79
61
60
61
65
64
67
68
82
83
84
70
71
66
74
85
86
87
61
89
90
91
83
88
80
68
68
40
41
41
53
52
58
55
54
55
54
45
44
43
43
42
42
51
50
49
42
56
57
46
47
48
59

18
95
94
98
101
102
103
104
106
105
109
94
112
108
107
121
120
122
119
117
116
91
90
92
93
99
100
97
113
118
110
111
115
114
96

|19
18
EN
150
151
152
153
154
155
156
157
158
140
141
142
145
144
143
Flue pipe connection top - RAO
Flue pipe connection top - PGI*
*PGI not for Germany and Austria

20
Spare part overview article numbers PRIMO RAO/PGI 8 kW
Note: Please consider the powdercoated parts can differ slightly in colour and colour effects though they are elaborated in high quality.
Nr. Art.Nr. Description
1 Z38747 Locking bolt
2 N102946 Dowel pin
3 L03978 Lock tongue
4 N112836 Hexagon socket screw M05x10
5 L04065 Closure flap
6 Z38715 Decorative door
B19112 Decorative door assy
7 N112828 Double sealing cord
8 N103693 Flat seal black 8x2
9 Z38758 Door glass
10 N103693 Flat seal black 8x2
11 Z38759 Front door glass
12 L03976 Glass holder
13 L03979 Hinge top
14 N112836 Hexagon socket screw M05x10
15 N112879 Vis à bride SK M06x16
16 Z39314 Door stop
17 L03980 Hinge bottom
18 L03977 Glass holder bottom
20 N112387 Wing nut
21 N112509 Washer M08
22 B19111 Cleaning opening assy top
23 N112551 Round sealing strip grey D11 (1m)
24 Z38755 Baffle plate cover
25 Z39011 Baffle plate rear/front left
26 Z38756 Baffle plate rear/front right
27 Z38757 Baffle plate bottom middle
28 Z38754 Baffle plate left/right
29 Z38716 Cast rear panel black
30 Z38753 Firebrick lining right
31 Z38752 Firebrick lining left
32 Z39012 Fire trough
33 Z36566 Sealing
34 Z36000 Cleaning cover
35 N112077 Wing nut
36 Z38752 Firebrick lining left
40 N112773 Catch counterpart
41 N110606 Self-tapping screw M03x10
42 N112700 Hexagonal nut M03
43 N112144 Washer M03
44 N112772 Double ball catch
45 L02349 Lock washer
46 L04033 Switch spacer
47 N111733 Magnetic switch bottom part
48 N112878 Self-tapping screw M03x10
49 L02310 Guard plate
50 N111732 Magnetic switch top part
51 L01445 Switch spacer
52 N112240 Self-tapping screw M05x10
53 L04067 Hinge left
Nr. Art.Nr. Description
54 N111973 Hexagonal nut M05
55 Z38749 Hinge
56 L04068 Hinge right
57 N111950 Hexagonal screw M05x10
58 B19225 Container lid RAO assy
59 N112600 Container seal
60 B19133 Side casing front left/rear right
61 N111947 Self-tapping screw M05x16
62 N112820 Silicone profile
63 B19008 Side casing panel right front
64 N112185 Self-tapping screw M05x10
65 Z35691 Spring plug
66 N112484 Door opener
67 L03997 Cover panel top
68 N112240 Self-tapping screw M05x10
69 Z38718 Convection cover
70 N112837 Self-tapping screw
71 Z38720 Cover frame
72 Z38543 Magnet shell
73 L04069 Holder plate
74 N111864 Grub screw
75 N107499 Hexagonal nut
76 N112499 Setscrew with pin
77 Z39044 Side casing panel right back
78 B19221 Shutter compl.
79 B19135 Side casing panel right front
80 L03995 Rear wall
81 N112490 Levelling screw black
82 L03987 Cover panel, bottom
83 N112487 Washer
84 N112185 Self-tapping screw M05x10
85 LB00968 Flue gas box
B19223 Flue gas box compl.
86 N112015 Flue pipe sealing
87 Z35898 Seal plate
88 N111950 Hexagonal screw M05x10
89 Z37448 Seal
90 Z37449 Cleaning opening
91 N112419 Wing screw
100 B19115 Ceramic ignition
101 Z38751 Seal for ignition
102 Z33793 Sensor tube
103 B16114 Temperature sensor
104 N112274 Hexagonal nut M05
105 Z35096 Pressure Pipe
106 N111551 Silicon hose
107 N112102 Differential pressure switch
108 Z35183 Friction bearing Di10
109 B19117 Control panel
110 N112048 Screw 2,5x10