Rime Lite i.4 User manual

Product Manual
i.4 , i.6 TTL

i.4 , i.6 TTL
Rimelite i.4, i.6 TTL Portable Mono-light with TS-5 Radio Remote
Most advanced,Accurate TTL technology in any environment , Great performance with Canon, Nikon, Fujifilm and Sony.
Base on Rimelite's highest TTL technology, offers the stable and accurate TTL performance in multiple i.flahes
Compact Size, but 400Ws and 600Ws Powerful Energy , 9.0 stops, 1/256 to 1/1, 0.3 stop increments.
Very Lightweight, Compact and High-efficiency design Lithium-Ion battery, highest quality Samsung battery equipped,
Ultimate Constant Color Balance ±50˚k over entire power range.
Complete Transformation ‘Portable flash - Studio flash, Studio flash –Outdoor flash,
Very quick and Simple, Changeable DC-AC,AC-DC Power supply pack. Liberation from the limitation of flashes
with Battery pack in Studio, Fast recycling time, Super stable operation.
Superior Performance : HSS: Up to 1/8000s, Duration time: 1/12,000s, Multi Flash.
Much brilliant 20W LED by High-efficiency design .
Built-in TS-5 wireless system, offers Automatic Recognition just with TS-5 is equipped on different camera’s hot
shoes.
But, offers very powerful, continuous performance, i.4 / 300 flashes, i.6 / 260 flashes

Operating Manual
Table of Contents
4 -12
Technical Data
13
Safety Instructions
14 -15
Name of Parts
16
LIB-2 Battery Pack
17
CHI2: AC power supply pack
18
Setting –Initialization
19
Power On/Off
20
Install of TS-5 on Camera hot shoe
21
Channel, Group setting
22
TTL Mode
23-24
‘M’ mode: Manual Flash
25
High Speed Sync
26
Multi mode:
Stroboscopic flash 27
Modeling Lamp
28-32
Firmware update
33
Warranty

Technical Data
9.0
5500
50
1/8000
0.01~1.3
260
0.3
TS-5
Compatible with
Canon, Nikon, Fujifilm, Sony
Flash Stability
+- 1/20 f-stop
Flash to Flash
Multi Stroboscopic Mode
99Hz / 99times
High Speed Sync
1/8000 sec
Color Temperature
+- 50K
Over Range
20W Powerful LED
2000 Lumens
Equivalent 120w halogen
Fast Recycling time with DC Battery
Ni.4 : 1.3sec
Ni.6 : 1.6sec
Changeable
DC-AC, AC-DC
Power supply pack
Fast Recycling time with AC Pack
i.4 TTL: 0.9sec
i.6 TTL: 1.2sec
Master of Flash

Jack Ngai
Jack Sir Photography
Specification i4 TTL
Max Energy 400 Ws
Power Range Ws 1.5-400 Ws
Power Range Manual Mode 8 F-Stop (1/256-1/1)
Power Range TTL Mode 9 F-Stop (1/256-1/1)
F-Stop Control Increments 3/10 or full f-stops
Recycling Time with LIB2
(Li-ion Battery) 0.1-1.3 s
Recycling Time
with LIB2-ACP2 (220v) 0.1-1.0 s
Recycling Time
with LIB2-ACP1 (110v) 0.1-1.6 s
Flash Stability Manual Mode ±1/20
Flash Stability TTL / HSS Mode ±1/20
Color Stability TTL / Manual Mode
±50K
Color Stability Multi or HSS Mode
±150K
Technical Data i.4 TTL

Jack Ngai
Jack Sir Photography
Flash Duration (t0.5)
Manual Mode 1/12,800 - 1/600
Flash Duration (t0.5) TTL
HSS Mode 1/80
Remote Control TS 5 Transmitter
Flash Trigger Manual Trigger Button, Photocell, Sync Cable, with built-in TS-5 Receiver
Color Temperature 5500K
Wireless Flash Control TS5
Controllable Slave Groups A, B, C, D
Channels 80 (1 ~ 80)
Transmission Range 100m
F-stop (m ISO 100)
with RSTN165 32.8
Flash Mode Control Manual mode, Multi mode(Stroboscopic Flash), TTL mode(HSS)
Stroboscopic Flash 99times, 99Hz
Technical Data i.4 TTL

Jack Ngai
Jack Sir Photography
Modeling Light 20W LED
Modeling Light Max. Output 2000 Lumens Equivalent 120w halogen
Modeling Light Color Temperature 5000K
Modeling Light CRI >92
Modeling Light Control On / Off, AF, Prop
Modeling Light
Battery
Number of Flash
Per Battery Charge 290
Battery Type Exchangeable Lithium-Ion Battery
DC 10.8V 4400mA
Battery Life 300 Charge cycles
(to 80% capacity left)
Battery Status Display 4 LED / 1st Blink LED=0%~25% - 2st led=25%~50% - 3st led=50%~75% - 4st led=75%~100%
Battery Charging Time 2.5 Hours
Max Battery Model light Capacity 180 Minutes with Max Modeling
Max Battery Flash Capacity 1/1 <290
Technical Data i.4 TTL

Jack Ngai
Jack Sir Photography
Miscellaneous
Flash Display Wide STN-LCD Display
Auto Dumping Yes
Operating Temperature range -10℃ -50℃
Ready Indicator Model Lamp, Switchable Beep
Optical Slave S1 (Manual Mode) / S2 (TTL Mode)
Sync Connector 3.5mm Mini-Phono
Battery Indicator Yes
Auto Power Save 1 minute later LCD dimming
Measurements
Dimension (without Battery) 125 x 125 x 265mm
Weight (without Battery) 1.9Kg
Technical Data i.4 TTL

Jack Ngai
Jack Sir Photography
Specification i6 TTL
Max Energy 600 Ws
Power Range Ws 2.0-600 Ws
Power Range Manual Mode 8 F-Stop (1/256-1/1)
Power Range TTL Mode 9 F-Stop (1/256-1/1)
F-Stop Control Increments 3/10 or full f-stops
Recycling Time with LIB2
(Li-ion Battery) 0.1-1.6 s
Recycling Time
with LIB2-ACP2 (220v) 0.1-1.3 s
Recycling Time
with LIB2-ACP1 (110v) 0.1-1.9 s
Flash Stability Manual Mode ±1/20
Flash Stability TTL / HSS Mode ±1/20
Color Stability TTL / Manual Mode
±50K
Color Stability Multi or HSS Mode
±150K
i.6 TTL

Jack Ngai
Jack Sir Photography
Flash Duration (t0.5)
Manual Mode 1/12,800 - 1/200
Flash Duration (t0.5) TTL
HSS Mode 1/60
Remote Control TS 5 Transmitter
Flash Trigger Manual Trigger Button, Photocell, Sync Cable, with built-in TS-5 Receiver
Color Temperature 5500K
Wireless Flash Control TS5
Controllable Slave Groups A, B, C, D
Channels 80 (1 ~ 80)
Transmission Range 100m
F-stop (m ISO 100)
with RSTN165 45.2
Flash Mode Control Manual mode, Multi mode(Stroboscopic Flash), TTL mode(HSS)
Stroboscopic Flash 99times, 99Hz
i.6 TTL

Jack Ngai
Jack Sir Photography
Modeling Light 20W LED
Modeling Light Max. Output 2000 Lumens Equivalent 120w halogen
Modeling Light Color Temperature 5000K
Modeling Light CRI >92
Modeling Light Control On / Off, AF, Prop
Modeling Light
Battery
Number of Flash
Per Battery Charge 260
Battery Type Exchangeable Lithium-Ion Battery
DC 10.8V 4400mA
Battery Life 400 Charge cycles
(to 80% capacity left)
Battery Status Display 4 LED / 1st Blink LED=0%~25% - 2st led=25%~50% - 3st led=50%~75% - 4st led=75%~100%
Battery Charging Time 2.5 Hours
Max Battery Model light Capacity 180 Minutes with Max Modeling
Max Battery Flash Capacity 1/1 <260
i.6 TTL

Jack Ngai
Jack Sir Photography
Miscellaneous
Flash Display Wide STN-LCD Display
Auto Dumping Yes
Operating Temperature range -10℃ -50℃
Ready Indicator Model Lamp, Switchable Beep
Optical Slave S1 (Manual Mode) / S2 (TTL Mode)
Sync Connector 3.5mm Mini-Phono
Battery Indicator Yes
Auto Power Save 1 minute later LCD dimming
Measurements
Dimension (without Battery) 125 x 125 x 265mm
Weight (without Battery) 2.0Kg
i.6 TTL

Please read i.4 and i.6 TTL product manual before use.
Please read and understand all the instructions to avoid injury to yourself and/or damage to i flashes
Safety Instructions
Do not expose to extreme temperatures ( above 140℉or below -4℉, or above 60℃or below -20℃).
Do not use in rain or in damp condition.
Do not let any foreign substance spill into i flashes
Do not expose to chemicals such as benzene and thinners.
Do not use liquid or aerosol cleaners. Clean with a soft damp cloth only.
Do not expose to direct sunlight or heat sources for a prolonged period.
Do not try to disassemble and/or repair i flashes yourself.
Do not subject i flashes to severe impact,
Do not place heavy objects on i flashes.
Do not subject i flashes to excessive pressure.
Do not touch i flashes with wet hands
Do not store in dusty areas.
Please be aware that Rime Lite claims no responsibility for damage from data loss due to breakdown, repair, or other causes.

1
3
24
6
5
78 9
10
11
12 13
1.Flash tube 2. Stand Bracket 3. Battery 4. Battery Release 5. Shoulder Strap Holder 6.
7. LCD display 8. Flash status indicator 9. Control button 10. Power On/Off button
11. Control button 12. Battery energy 13. Battery energy-check button 14. 3.5mm Sync Cord Port
Operating Manual
1.NameofParts
14

A-Umbrella Reflector (NRST-165), B- Umbrella holder, C- Screw Lever, D-Mount Lock, E-Protecting Glass,
G-Carrying bag for i.flash TTL,
Operating Manual
1.NameofParts
E
Umbrella rods should go into ‘A’ Umbrella reflector’s hole.
Unscrew ‘C’ Screw lever until umbrella’s rods
D
G
ABC

Technical Data
Approx. Battery level in percentage of the total
capacity is indicated on the display.
4 LED On : 100 ~ 75%
3 LED On: 75 ~ 50%
2 LED On: 50 ~ 25%
1 LED Blink : 0 ~ 25%
Battery energy-check button
2.LIB-2BatteryPack
LIB-2: Lithium-Ion battery DC 10.8V 4400mA
CHI2: Charger for i.flash TTL
Output: 12.6V, 3A,
fast recharge time: 2hours
to the full charge
I.Flash TTL+LIB-2
Green LED turns it On if the recharging
is completed to 100% ‘full charge’

Technical Data
3. CHI2:ACpowersupplypack
I.Flash TTL+ACP1(110~130V)
ACP2(210~240V)
Power cable
Unlimited flashes with ACP(AC Power Supply pack can offer the fast
recycling time in Studio photographing
Recycling Time
with ACP2 (220v) 0.1-1.3 s
Recycling Time
with ACP1 (110v) 0.1-1.9 s
i.6TTL
i.4TTL
Recycling Time
with ACP2 (220v)
0.1-1.0 s
Recycling Time
with ACP1 (110v)
0.1-1.6 s

Please read i.4 and i.6 TTL product manual before use.
Operating Manual
4.Setting-Initialization
Setting-Initialization
Press TS-5 button or i.flash TTL button for 2 sec.
All setting values ‘Group, Channel, Exposure value, Mode’ can be initialized.

Operating Manual
5.PowerOn/Off
Auto Power-off
-To reduce battery power use,
i Flash TTL is designed to go into Sleep mode after 30 minutes of non-activity and to turn off automatically
after 40 minutes of non-activity.
Press ‘Power’ button for 2 sec to turn on the flash. LCD display illuminates and shows the memorized
previous functional setting of flash.
i.Flash TTL can support TTL(Auto flash) and M mode(Manual flash)
i.Flash can be perfectly controlled through only using TS-5.

Please read i.4 and i.6 TTL product manual before use.
Operating Manual
6.InstallofTS-5onCamerahotshoe
Auto-Recognition function
Power On/Off
Ex) Canon version TS-5 Power Switch On-> i.flash body is
automatically recognized and ‘Canon’ symbol appears on LCD
display.
i.4 , i.6 TTL responds automatically in order to match the correct camera system after Power On of TS-5