Rinnai 4 Commercial & Common Flue System DD1 Flue Adaptor IM
READ ALL INSTRUCTIONS BEFORE USING THE SYSTEM.
Always comply with the following precautions to avoid dangerous situations and to ensure
optimum performance.
Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in
personal injury or death.
WARNINGS: Indicates a potentially hazardous situation which, if not avoided, could result in
personal injury or death.
CAUTIONS: Indicates a potentially hazardous situation which, if not avoided, could result
in minor or moderate injury or damage to the appliance. It may also be used to alert against
unsafe practices.
REGULATORY INFORMATION
This system shall be installed in accordance with these instructions and all regulatory requirements
which exist in your area including those in relation to manual lifting, working at heights and on
roofs. Applicable publications and regulations may include:
• Rinnai Commercial Common Flue System, Operating and Installation Manual (supplied
separately)
• Current AS/NZS 3000, AS/NZS 3500 and AS/NZS 5601
• Plumbing Code of Australia (PCA)
• Rinnai Installation Instructions
• Local Occupational Health and Safety (OH&S) regulations
• Local Regulations and Municipal Building Codes
• Service and Removal MUST BE by an Authorised Person only.
DO NOT operate this system before reading the manufacturers instructions.
For continued safety of this system it must be installed, operated and maintained in accordance
with the manufacturer’s instructions.
A NOTE ON ILLUSTRATIONS
The illustrations used in this manual are for explanatory purposes only and the shape of your unit
may vary slightly from that which is shown in this manual.
MANDATORY INSPECTION PRIOR TO INSTALLATION
Immediately report any damage or discrepancies to the Supplier of the appliance. This
appliance was inspected and tested at the time of manufacture and packaging, and released for
transportation without known damage. Upon receipt, inspect the exterior for evidence of rough
handling in shipment. Ensure that the appliance is labelled correctly for the gas and electrical
supply, and/or other services it is intended to be connected to.
For safety and warranty purposes, appliances that may be damaged or incorrect MUST NOT be
installed or operated under any circumstances. Installation of damaged or incorrect appliances
may contravene local government regulations. Rinnai disclaims any liability or responsibility
whatsoever in relation to the installation or operation of damaged or incorrect appliances.
WARNINGS & SAFETY
