Rioned MULTI JET User manual
USER’S MANUAL
MULTI JET
Edition: 04
Date: Wednesday 24 January
RIONED
P.O. Box 5070
5004 EB Tilburg
The Netherlands
Telephone: +31 13 5479100
E-mail: [email protected]
Internet: www.rioned.com
01/18 2
©Copyright 01/18 Rioned/RIOR B.V.Tilburg - The Netherlands
All rights reserved. No part of this publication may be copied or published by means
of printing, photocopying, microfilm or otherwise without the prior written consent of
RIONED. This restriction also holds for the corresponding drawings and diagrams.
RIONED has the right to change parts at any time without any prior or direct warning
to the client. Also, the contents of this manual can be changed without any prior warn-
ing.
This manual is to be used only for this machine.
For extra information on adjustments, maintenance and repair, please contact the
technical department of your dealer.
01/18 3
Foreword
This user’s manual is a manual for the professional user.
This user’s manual has the purpose to control the machine in a safety manner and
must be kept with the machine.
The photos and drawings help to understand the text easier.
First the user’s manual gives an overview of the most important safety aspects. Then
it explains how the machine is built up and the global working of the machine.
Chapter “Technical specifications” gives information about the working characteris-
tics, performance under normal use and construction specifications.
“Control” is the next chapter. This chapter explains how to use the machine system-
atically.
With the chapter “Maintenance”, the user can do small maintenance on the machine.
Chapter “Trouble shooting” has the purpose to solve simple defects.
With the “Exploded views” you can order original spare parts, are also useful for
mounting, and disassemble the machine.
Finally gives the chapter “Appendix” information about electrical and/or hydraulic
connections.
01/18 4
01/18 5
Table of Contents
1 Introduction...............................................................................7
1.1 Use......................................................................................7
2 Security......................................................................................9
2.1 Instruction indications in this manual........................................9
2.2 Descriptions security measures................................................9
2.3 Personnel protection outfit ......................................................9
2.4 Warning ...............................................................................9
2.5 Personnel qualification and education .....................................10
2.6 Danger that can occur if the security regulations aren’t observed10
2.7 Working safely..................................................................... 10
2.8 Security regulations for the user and technical service ..............10
2.9 Security regulations for maintenance, inspection and mounting ac-
tivities................................................................................10
2.10 Making changes and fabricate spare parts ...............................11
2.11 Improper use ......................................................................11
3 Technical Specifications. ..........................................................13
3.1 General .............................................................................13
3.2 Motor ................................................................................14
3.3 Pump ................................................................................15
4 Construction.............................................................................17
5 Control .....................................................................................21
5.1 Hitching up the trailer...........................................................21
5.2 Check before departure ........................................................23
5.3 Unhitching and setting up .....................................................23
5.4 Before starting ....................................................................24
5.5 Starting the machine............................................................25
5.6 Unclogging a drain ............................................................... 27
5.7 Cleaning a wall, terrace or floor. ............................................29
5.8 Stop working.......................................................................30
5.9 Spray gun with NW 5 hose....................................................30
5.10 Using the device during periods of frost ..................................31
5.11 Additional preparations when preparing for use:.......................32
6 Symbols ...................................................................................33
6.1 Control box.........................................................................33
6.2 Pressure gauge....................................................................34
6.3 Pressure regulator................................................................34
6.4 Security sticker....................................................................35
7 Options.....................................................................................37
7.1 Hour counter.......................................................................37
7.2 Anti-freeze with anti freeze tank ............................................37
7.3 Pulsator system................................................................... 38
7.4 Hydraulic reel control ........................................................... 39
7.5 Radio remote control type Riomote.........................................39
01/18 6
7.6 Hose guide..........................................................................40
7.7 Run dry protection ...............................................................40
7.8 Suction Ventury................................................................... 41
7.9 Unwinding by hand of the hydraulic driven hose reel.................41
7.10 Working lamp......................................................................42
7.11 Water circulation system with warm water ..............................43
7.12 Operating warm water system...............................................44
8 Maintenance.............................................................................45
8.1 Daily maintenance ...............................................................45
8.2 Weekly maintenance ............................................................45
8.3 Minor servicing ....................................................................45
8.4 Hydraulic system .................................................................46
8.5 Maintenance wheel bearings and wheel nuts............................47
8.6 Check the brake drums and the brakes...................................47
8.7 Extensive periodical maintenance...........................................48
8.8 Maintenance scheme ............................................................48
9 Troubleshooting .......................................................................49
10 Exploded Views and part lists...................................................51
10.1 Exploded view Pump P52 ...................................................... 52
10.2 Exploded view Pump P45 ...................................................... 53
10.3 Exploded view Pressure regulator ..........................................54
11 Appendix ..................................................................................55
11.1 EC declaration Of Conformity For Machinery ............................55
11.2 Sales Managers ...................................................................56
11.3 Dimensions.........................................................................58
11.4 Sound level report ...............................................................59
12 Index .......................................................................................61
01/18 7
1 Introduction
RIONED wishes to thank you for your purchase of the RIONED drain and sewer-
clearing machine. We recommend that you read this manual thoroughly and
see that the machine is handled and maintained in the proper manner. If your
machine should give trouble and need servicing, when you want to order parts,
or if you have any questions, contact your RIONED dealer.
The machine is built at:
RIONED
Contact:
P.O. Box 5070
5004 EB Tilburg
The Netherlands
Telephone: +31 13 5479100
E-mail: [email protected]
Internet: www.rioned.com
The Rioned high-pressure device has been especially designed and manufac-
tured for cleaning drains, walls, floors and terraces with cold or hot water. For
cleaning drains, special nozzles are included in the delivery; for all other pur-
poses, the spray-gun which is also included, can be used.
This manual contains all the necessary information concerning control and
maintenance. If the device is positioned correctly, properly controlled, and reg-
ularly maintained, a warranty will be given according to the general conditions
of delivery. However, should it arise that the control and maintenance proce-
dures are not diligently followed, the warranty will become invalid.
The machine may only be used by authorized personnel.
The machine can not be used in an explosive environment.
In this manual you will find all necessary information concerning operations and
maintaining your machine. If handled properly, your machine is guaranteed ac-
cording the general delivery conditions.
1.1 Use
The integrated engine drives the high-pressure pump via a V-belt. This pump
receives water from the water tank via the water filter and pressurizes it. The
pressure can be continuously adjusted. The pressurized water leaves the ma-
chine via the high-pressure hose on the reel.
01/18 8
01/18 9
2 Security
Be responsible for other people when working with this machine.
This manual contains instructions for fundamental conditions that must be fol-
lowed by use and maintenance of this machine.
That is why it is necessary that authorised and qualified personnel must read
the user's manual and the user’s manual must always be available with the ma-
chine. Near the general regulations in this chapter, you must also follow the se-
curity regulations in the other chapters.
2.1 Instruction indications in this manual
The in this manual containing security instructions, which are dangerous if they
are not obeyed, are marked with general security signs.
Security sign DIN 4844-W9.
2.2 Descriptions security measures
• Emergency stop
This machine is equipped with an emergency stop. By operating the
emergency stop, the machine will stop immediately. Do not use this
button for normal stopping. Only use it when dangerous situations oc-
cur. After use, remove the danger and pull the emergency stop in order
to be able to start up again. Make sure the emergency stop can always
be reached.
• Security covers
This machine is equipped with several security covers over parts that
are rotating. It is forbidden to remove these security covers during op-
erating this machine. Remove them only if there is maintenance on the
machine. Stop the machine.
2.3 Personnel protection outfit
• Protection looking glasses
• Ear protector (Recommended)
•Gloves(Recommended)
• Waterproof clothing (Recommended)
2.4 Warning
It is strongly forbidden to spray on humans and animals.
Never block the control levers in any way, otherwise mentioned.
Machine cover must be closed during working with the machine.
01/18 10
Always use the break cable during transport.
Never exceed the maximum speed (50 miles/h).
2.5 Personnel qualification and education
Personnel that use, maintain and inspect the machine must have the right qual-
ifications for this job.
Responsibility and authorisation of the personnel and the supervision on the
personnel must be embedded. If the knowledge is not present, the user must
provide for the necessarily education.
Be sure personnel understands the content of this manual.
2.6 Danger that can occur if the security regulations aren’t observed
If the security regulations are not observed, danger can occur for personnel
and for the environment.
No amends are given if the regulations are not observed.
If the regulations are not observed, this can results in:
• Failure of important functions of the machine.
• Failure of prescribes methods for maintenance.
• Exposure of persons to dangers of electrical or mechanical failures
2.7 Working safely
The in this manual named security prescriptions, the national prescriptions to
prevent accidents and the internal labour, company and security prescriptions
must be followed by the user.
2.8 Security regulations for the user and technical service
• Protections of moving parts (for example couplings) may not be re-
moved if the machine is working.
• Leakage of dangerous mediums must disposed in a manner that there
is no danger for the personnel and environment. Statutory regulations
must be followed.
• Danger caused by electricity must be excluded.
2.9 Security regulations for maintenance, inspection and mounting activities
• The user sees to it that qualified technicians do all maintenance, in-
spection and mounting activities. They must study the manual thor-
oughly.
• Maintenance may only be done when the machine is not functioning.
• The in the user’s manual mentioned handling to stop the machine must
be notified.
• Directly after maintenance of the machine, all the security and protec-
tion facilities must be functionally.
01/18 11
• Before starting the machine again, you must follow the instructions
correctly.
2.10 Making changes and fabricate spare parts
Changes to the machine are only permitted if Rioned has given written author-
isation. The use of original spare parts and accessories are for the safety nec-
essary. Rioned is not responsible for injuries or damages if other spare parts
are used.
2.11 Improper use
The security during working with the machine is only guaranteed if the use of
the machine is conform the user’s manual. The limits that are written in chapter
“Technical Specifications” and “Appendix” may never be overstepped.
If the machine does not work or give troubles, it is forbidden to work further
with the machine. Telephone your dealer or the technical department of your
dealer.
This manual contains all the necessary information concerning control and
maintenance. If the device is positioned correctly, properly controlled, and reg-
ularly maintained, a warranty will be given according to the general conditions
of delivery. However, should it arise that the control and maintenance proce-
dures are not diligently followed, the warranty will become invalid.
01/18 12
01/18 13
3 Technical Specifications.
3.1 General
Description (symbol) Unit
Dimension : see chapter11.3 "Dimensions"
page.: 58
Weight (dry) (m) : 1100 kg
Total weight (m) : 1900 kg
Quantity water tank : 2 x 400 l
Fill medium : Water
Maximum temperature medium : 50 °C
Type tyre : 195R14
Recommended tyre pressure : 4.5 bar 65 psi
Total length high-pressure hose : 80-150 m
Diameter high-pressure hose : ½” - 5/8” 13 mm - 16 mm
Total length 2e high-pressure hose : 60 m
Diameter 2e high-pressure hose : 1/2” 13 mm
Total length supply hose : 35 m
Diameter supply hose : 3/4” 19 mm
Place type plate :
Place chassis number :
Sound level : see chapter11.4 "Sound level report"
page.: 59
Measure position : see chapter11.4 "Sound level report"
page.: 59
Oil hydraulic : HESTIA 46
(order number 71003500046)
Important!:Replace once a year!
Max. oil temperature : 90 °C
Capacity fuel tank : 30 litter
Year of construction (month/year) : See type plate
01/18 14
3.2 Motor
Description (symbol) Technical unit (SI unit)
Type : Kubota V1505 Turbo
Number of cylinder : 4
Bore x stroke (d x l) : 78 x 78,4 mm
Power (P) : 32,7 kW at 3000 min-1 DIN 70020
Fuel : Diesel
Cooling : Water cooled
Weight (m) : 114 kg
Battery (U,I) : 12 V, 63 A
Starter : 12 V x 1,2 kW
Oil : 10W30 API/SF-CC or better
Quantity : 4 l
Type : Kubota V1505
Number of cylinder : 4
Bore x stroke (d x l) : 78 x 78,4 mm
Power (P) : 26,1 kW at 3000 min-1 DIN 70020
Fuel : Diesel
Cooling : Water cooled
Weight (m) : 110 kg
Battery (U,I) : 12 V, 63 A
Starter : 12 V x 1,2 kW
Oil : 10W30 API/SF-CC or better
Quantity : 4 l
Description (symbol) Technical unit (SI unit)
Type : Kubota D1105
Number of cylinders : 3
Bore x stroke (d x l) : 78 x 78,4 mm
Power (P) : 19,5 kW (26 PK) at 3000 1/min
DIN 70020
Fuel : Diesel
Cooling : Water-cooled
Weight (m) : 89 kg
Battery (U,I) : 12 V, 63 A
Oil : 10W30 API/SF-CC or better
Normal coolant engine is protected to -28 °C
Special coolant engine is protected to -38 °C
For more information concerning the engine, you can find it in the book deliv-
ered with this machine.
01/18 15
3.3 Pump
Description (symbol) Technical unit
Type : Speck P45
Number of plungers : 3
Number of valves : 6
Maximum pressure (p) : See type plate on frame
Maximum output : See type plate on frame
Weight : 50 kg
Maximum water temperature : 60 °C
Oil : GX 80W90
Quantity : 3.5 l
Type : Speck P52
Number of plungers : 3
Number of valves : 6
Number of revolutions : ±1000 min-1
Maximum pressure (p) : See type plate on frame
Maximum output : See type plate on frame
Oil : GX 80W90
Quantity : 1 l
Weight (m) : 54 kg
Maximum water temperature (T) : 60 °C
Quantity : 3.5 l
For more information concerning the pump, you can find it in the pump appen-
dix delivered with this machine.
01/18 16
01/18 17
4CONSTRUCTION
The high-pressure machine contains the following main parts:
1. Tool box
2. High-pressure hose on reel
3. Supply hose on reel
4. Water tank
5. Machine cover
6. Support (2x)
7. Hose holder
8. Hose guide
9. Control box
10. Supply pipe
11. Hydraulic reel control
12. Pressure gauge
13. High-pressure (HP)-valve
14. Level indicator water tanks
15. Pressure regulator
16. Pulsator system On/Off
17. Swivel locking device (2x)
18. Hose guide locking device
19. Connection supply hose
1
2
4
6
6
9
3
7
13
11
10
12
15 22
23
20
Table of contents
Other Rioned Other manuals
