Riotoro CR480 MID User manual

Your Installation
Guide For The
CR480 MID Tower CASE

Congratulations you are
on your way to build the
perfect gaming machine

Contents
Chapter 1: Before You Begin
- What is in the box
- Product Details
- Before You Begin
Chapter 2: Ready, Setup, Go
- Removing the Side Panel
- Install the Motherboard
- Install Hard Drives and SSDs
- Install Drives to 2.5” Mounts
- Attaching Cables
- Attaching the Case Fan Cables
- Fan Mounting Point and Water Cooling Support
- Install the Power Supply
- Troubleshoot Your New CR480
Chapter 3: Specifications
- Specifications
- Recommended Parts
- Recommended Peripherals
Chapter 4: Everything Else
- Important Safety Information
- General Maintenance
- LIMITED PRODUCT WARRANTY ("Limited Warranty")

Welcome to RIOTORO
Thank you for purchasing the RIOTORO CR480
Computer Case.
The CR480 was engineered to provide a solution that offers
plenty of expansion space, and lots of features at a very com-
petitive price. A well thought product for those that wish a
versatile solution, featuring an incredible amount of heat dissi-
pation performance for its price range, it also supports
120mm radiators, a tool free design, USB 3.0 and multiple
SSD/HDD bays.
Note: This manual is a guide for RIOTORO’s computer cases. For instructions on installing
the motherboard and other components, please refer to their documentation.

Before You Begin
1
www.riotoro.com/cases

6 Chapter 1 Before You Begin
CR480 MID TOWER
What’s in the Box
Included Hardware
- 6x nylon ties
- 8x long screws
-8x screws for fans
-2x spare thumbscrews
for optional cooling radiators
- 16x small Phillips
head screws
- 10x small accessories screws
CR480 Case

Chapter 1 Before You Begin 7
CR480 MID TOWER
Product Details
1) Front Panel:
- USB 3.0 ports
- Microphone jack
- Headphone jacks
- Power switch
- Reset switch
- Hard Disk Drive LED 1

8 Chapter 1 Before You Begin
CR480 MID TOWER
Product Details
2) I/O shield cutout 3) PCI-E expansion slots
4) Power supply bay
2
3
4

Chapter 1 Before You Begin 9
CR480 MID TOWER
Before You Begin
Please take the following precautions:
- Handle all PC components and cards with care.
- Hold cards and processors by their edges to avoid damaging
components.
- To avoid damaging components by electrostatic discharge, periodically
ground yourself by touching an unpainted metal surface or by using a
wrist grounding strap.
- Before connecting cables, make sure the connectors are
correctly aligned.
- Consult the documentation of your motherboard and other components
for specific installation instructions and troubleshooting.

10 Chapter 1 Before You Begin
CR480 MID TOWER
Before You Begin
When routing cables
Route and bundle PSU and case cables to reduce clutter for a cleaner
look and to improve airflow. The case is designed with cable pass-through
cutouts throughout and space to conceal cables under the right side panel
(as seen from the front). Use the provided nylon zip ties to hold the cables
in place.

Chapter 1 Before You Begin 11
Ready, Setup, Go
2
www.riotoro.com/cases

12 Chapter 2 Ready, Setup, Go
CR480 MID TOWER
Remove the Case Side Panels
Put the case upright on a stable, flat surface with rear facing you. Remove
the thumbscrews from both side panels and store them in a safe place.
Remove each panel by sliding the panel toward the rear.
3
4
1
2

Chapter 2 Ready, Setup, Go 13
CR480 MID TOWER
Install the Motherboard
The CR480 is compatible with motherboards up to E-ATX, including ATX,
Micro ATX, and Mini-ITX.

14 Chapter 2 Ready, Setup, Go
CR480 MID TOWER
Install the Motherboard
Install the CPU, CPU cooler and memory on the motherboard.
Refer to your CPU and motherboard documentation how to mount the
CPU and its cooler on your motherboard. If you are using a liquid CPU
cooler you may find it easier to install it after the motherboard is installed
in the case.

Chapter 2 Ready, Setup, Go 15
CR480 MID TOWER
Install the Motherboard
Install the I/O shield
Your motherboard should have come with a standard I/O shield that
exposes the rear motherboard connectors out of the back of the case.
From inside, snap the I/O shield into the cutout in the rear of the case.
Example I/O panel

16 Chapter 2 Ready, Setup, Go
CR480 MID TOWER
Install the Motherboard
Attach the motherboard to the case.
The CR480 comes with most pre-installed standoff, it also adds a couple
extra if you need to add them, Slide the motherboard into the I/O shield
and then align the motherboards screw holes with the case standoff.
Attach the motherboard to the standoffs with the provided motherboard
screws.

Chapter 2 Ready, Setup, Go 17
CR480 MID TOWER
Install HDD & SSD
The CR480 has one 3.5” drive bays and two 2.5” drive bays. These bays
are located in the compartment under the motherboard.
The Cr480 comes with three 3.5” bays for HDD, the bays and retention
mechanism are tool less.
Instructions:
- Pull each of the brackets
to remove the plastic bracket
out of the bay, once out, place
the HDD into the plastic bracket
and slide it back to its original
position until it is secure.

18 Chapter 2 Ready, Setup, Go
CR480 MID TOWER
Installing Drives into the 2.5” Mounts
The CR480 case has two mounts for 2.5” drives such as SSD’s.
Instructions:
- Place the 2.5” drive and
align the drive to a position
where it can be secured.
- From the other side of the
case, screw the drives in
place with the provided
Philips screws.