Riptide Urban Lite User manual
2017
Euro 240v 50 Htz
LITE
™
CONTENTS
2
5
22
The Urban Lite™Collection model range
The Urban Lite™Collection model range
IMPORTANT SAFETY INFORMATION
5
INSTALLATION & SET-UP
Never, under any circumstances, install your
Riptide Spa on an electrically heated oor.
INSTALLATION & SET-UP
Light
Settings
Mode
Jets 1
Jets 2
CONTROL PANEL OPERATIONS
(will only operate if you
have a 2 pump spa)
CONTROL PANEL OPERATIONS
Cooling to xx.x
Heating to xx.x
Heating Suspended
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
• Water care
• Audio
• in.clear-200
linked version
• Standby
• Maintenance
• Date & time
• Keypad
• Wi-Fi
• Cong
• Restore
• About
CONTROL PANEL OPERATIONS
Away, Beginner,
Energy Savings, Super Energy Savings,
Weekender,
* Default value
Away from home:
Beginner:
Energy Savings:
Super Energy Savings:
Weekender:
*Filtration will be reduced when the economy mode is active.
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
• Maintenance reminders
• Standby
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
CONTROL PANEL OPERATIONS
CONTROL PANEL OPERATIONS
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
CONTROL PANEL OPERATIONS
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
Light
Settings
Mode
Jets 1
Jets 2
CONTROL PANEL OPERATIONS
For easy access, all components in Urban Lite Spas
are positioned on the same side as the compartment
door. In the event that an engineer needs to get
inside your spa all that is needed is to pull away the
steps and open the cabinet.
FUNCTIONS
www.geckodocs.com
TROUBLESHOOTING GUIDE
www.geckodocs.com
TROUBLESHOOTING GUIDE
3
The error codes indicate a failure or problem that must be rectified to guarantee the good function of the system�
The error code and the water temperature are displayed alternately on the keypad�
The error messages listed below display on the LCD and LED keypads�If your spa is equipped with a color keypad,
please refer your techbook for more information on error messages�
FLO
The system has detected no water flow during the main
pumps operation�
UPL
No low-level configuration is present in the control system
memory, insert a valid in�stik to program the control unit�
OH
The spas water temperature has reached 108°F (42°C)
Do not enter spa water!
AOH
The temperature inside the spa skirt is too high and
causes an increase of the internal temperature of the
control system above normal limits�
Possible error codes on in.yj, in.ye, in.yt and in.xe control systems
Troubleshooting
HL
The water temperature in the water heater has reached
119 °F (48°C)�
Do not enter spa water!
Prr
The system detects a problem with the regulation probe�
The system constantly verifies if the temperatures read by
the probe are inside the normal limits�
Hr
An internal error with the system hardware has been
detected�
Note 1: When using chemicals, always follow the
instructions provided on the manufacturer’s labels.
Note 2: Use an accurate test kit to perform all chemistry tests.
Note 3: Never mix chemicals.
Note 4: Always add chemicals directly to the spa water,
evenly spreading the chemicals over the surface. Run
the Filter Pump for 15 or more minutes after applying any
chemical. To help with the mixing of chemicals you can
turn on your massage system as well.
Note: Trichlor chlorine tablets and/or non-dichlor
granular chlorines must not be used in your spa , they
may damage the spa , voiding your warranty.
MAINTENANCE
Note: Never use muriatic or hydrochloric acid to adjust
pH as it can damage your spa shell and surroundings.
Note: Use only branded Hot Tub Barn chemicals to
ensure premium performance.
Note: If you live in a hard water area, ll the spa with
soft water if available. The calcium balance should be
between 40-250 ppm.
MAINTENANCE
RIPTIDE TOTAL ALkALINITY (TA) ADjUSTMENT
Volume Alkalinity Chemical Addition Total alkalinity adjustment required in mg/L
(Metre³) Eect 10 20 30 40 50 60 70 80 90 100
Table of contents
Other Riptide Hot Tub manuals
Popular Hot Tub manuals by other brands
Jacuzzi
Jacuzzi Delos Instructions for preinstallation
MAAX Spas
MAAX Spas PERFORMANCE SERIES owner's manual
Jacuzzi
Jacuzzi Allusion 7242 Specification sheet
Iberspa
Iberspa Zeus quick start guide
American Standard
American Standard CADET ELITE CORNER 2775E SERIES installation instructions
Master Spa
Master Spa Twilight Series owner's manual
American Standard
American Standard Cadenza Elite 6060E parts list
JNJ SPAS
JNJ SPAS SPA-8098 operating instructions
Daybreak Fitness
Daybreak Fitness Daybreak 408 WLHS43081 user manual
Jacuzzi
Jacuzzi Andros installation manual
EAGO
EAGO TS Series Installation instruction
Arctic Spas
Arctic Spas Custom Series owner's manual
