Rivco IC010-BP User manual

IC010-BP (Black) and IC010-TP (Tan)
Indian Trunk Relocation Filler pad
1. Open the trunk lid. Remove the trunk liners. As shown on photo (1A)
remove the three 6mm hex screws that hold the lower backrest pad to the
trunk. Remove the lower pad from the trunk.
2. Place the filler pad as shown in photo (2) with the Velcro tabs facing out
towards you. Place two of the screws thru the two lower holes as shown
(2A).
3. Replace the lower backrest starting the two lower screws first then the
upper then tighten all three. Replace the trunk liners.
4. As shown in photo (3) lift the flap at the rear of the seat up and secure the
Velcro pads from the seat flap to those on the filler pad.

RIVCO Products, Inc.
440 S. Pine St., Burlington, WI. 53105
262-763-8222
To register your warranty and see many other cruiser and bagger accessories, please visit our website.
www.rivcoproducts.com