Riverside Furniture Allegro Home Office 44728 User manual

Made in Viet Nam
email: [e-mail]
Components and Hardware List
Page 1 of 3
44728 L-Desk And Return
Allegro Home Office
Assembly Instructions
A B C D
File Rod & Clips
Grommet
Bun Foot
1 pc.3 pcs.
Flat Washer
Be sure to check all packing material carefully for small parts,which
may have come loose inside the carton during shipment.
F11pcs. G2 sets.
E
14 pcs. 14 pcs. 14 pcs.
Lock Washer Allen Head Bolt
1/4''x 1-1/2''
4mm Allen Wrench
Step 1 : Assemble the seven bun feet (A) onto the bottom. Carefully
set the Desk back upright.
Adjustable
Leveler
F
H I 1 pc. K
1pc. 1pc.
Back Panel L Return Base L Return Top
2 pcs.
Pencil Tray
L

Made in Viet Nam
email: [e-mail]
Page 2 of 3
44728 Return
Allegro Home Office
Assembly Instructions
Step 2 : Place the Return on a clean, soft surface such
as a blanket or carpet and assemble the four bun feet onto
the bottom. Carefully set the return back upright.
Step 3 : Assemble the back panel to the desk and the return, using the Allen-Head Bolts (D), Lock
Washers (C) and Flat Washers (B). Tighten the Allen Bolts using the Allen Wrench (E).
Back Panel
Adjustable
Leveler F
E
D
C
B
H
I

Made in Viet Nam
email: [e-mail]
Page 3 of 3
44728 L-Desk & Return
Allegro Home Office
Assembly Instructions
Step 4 : Remove the Top drawer from the cabinet (see below)
Step 5 : Assemble the Top panel to the Aseembly, using the Allen-Head
Bolts (D), Lock Washers (C) and Flat Washers (B). Tighten the Allen
Bolts using the Allen Wrench (E). Carefuly reinstall the drawers by
aligning the channels of the drawer slides and gently pushing the drawers
back into the cabinet.
G
Unscrew to adjust
the file rod
Unscrew to adjust
the shelf height
A
A
A
WARNING
Pinch Point.
Keep fingers
from underneath
drawer front
when releasing.
K