Riverside Furniture 84520 User manual

Page 1 of 3
Made in China
Components and Hardware List
Promenade
Home Office
Assembly Instructions
FURNITURE
Riverside
Corner Desk Top
A
Left Desk Top Right Desk Top
B C
D
Back Long
stretchers
Back Short
stretchers
E F
M5/16" x 2-1/4"
Allen Head Bolt
M1/4" x 3/4"
Allen Head Bolt
5mm Allen Wrench 4mm Allen Wrench
1/4" Spring Washer
M5/16" x 1-3/4"
Allen Head Bolt
Back Legs-Left &
Right
Middle Back Leg
Left End Frame Right End Frame
G
L
QR
M N
H I J
O
K
P
S
Metal "L" Bracket
S
QR
G
D
D
F
GA

Page 2 of 3
Made in China
FURNITURE
Riverside
Remove the drawers from the Left and
Right Desk Top and lay them aside. Make
note where each drawer is removed from so
they can be installed back into the proper
location.
To remove the drawers: open drawer fully
and locate the black lever inside the
extended channel of both slides. Push one
lever up and the other lever down while
gently pulling the drawer out of the cabinet.
If the slides do not release, push levers in
the opposite directions.
B
C
Promenade
Home Office
Assembly Instructions
E
BH

Page 3 of 3
Made in China
FURNITURE
Riverside
Using two people, carefully
2. Using two people, carefully set one
of the assembled Side Desks upright
and move into position at the correct
side of the Corner Desk. While one
person supports the Side Desk, the
other person partially installs
3. Assemble the Back Stretcher at the
bottom back of the Side Desk, to the
Back Leg,
Carefully move the Side Desk to be
snug with the Corner Desk, if
necessary, and tighten the Bolts using
the 4mm and 5mm Allen Wrenches,
connecting the Desk Tops and Back
Stretcher.
1. Repeat for the other Side Desk.
2. Reinstall the drawers back into the
proper locations
.
Promenade
Home Office
Assembly Instructions
N
RQ
L