Riverside Liam 71132 User manual

#71132
Return Desk
Riverside
Components and Hardware List
email: [email protected]
FURNITURE
Made in Viet Nam
Page 1 of 2
A
Liam
Return Desk
Assembly Instructions
1 pc. B1 pc. C1 pc.
Leg Top Return
Flat Washer
Ø8 x Ø20mm
pc
9s.
H5
Lock Washer
Ø9 x Ø13mm
pc
9s. H4
Allen Head Bolt
Ø6 x 40mm
pc
5s. H1
Allen Head Bolt
Ø6 x 20mm
pc
2s. H3
Be sure to check all packing material
carefully for small parts, which may
have come loose inside the carton
during shipment.
Allen Key
4 x 110mm
pc
1. H6
Step 2: Remove the two drawers from the
Return (C) and lay them aside.
Note: Place the Return back edge on a
clean, soft surface .
H6
Allen Head Bolt
Ø6 x 60mm
pc
2s. H2
H2
H4
H5
H6
H1
H4
H5
A
B
C
Step 1: Attach the Leg (A) to the Top(B) using two Allen Bolts (H1), Lock Washers (H4) and Flat
Washers (H5) to the middle rail of the top and two Allen Bolts (H2) and same washers through the
corner blocks and into the legs. As shown in Detail A and B.
DETAIL B
DETAIL A
4 pcs.
File Bar 13-3/4"
long (installed)
Figure 8
(installed)
Wood Screw
Ø3.5 x 12mm
(installed)
4 pcs.
H9H7 H8 2 pc.

Page 2 of 2
H1
H4
H5
H6 H6
H3
H4
H5
C
C
Step 3: Attach the Return (C) to the Top(B) using the Allen Bolts (H1) and (H3), Lock Washers (H4),
Flat Washers (H5). Adjust all parts for correct fit if necessary and tighten all the Bolts
with the Allen Key (H6).
Step 5: Carefully set the Desk upright and reinstall the drawers.
Riverside
email: [email protected]
FURNITURE Made in Viet Nam
Liam
Return Desk
Assembly Instructions
Legal Size File Folder
Letter Size
File Folder
H7
H8 H9
Adjustable leveler
The File drawer may be set up to use either
letter or legal size file folders using the File
Rods supplied. Attaching the File Rods to the drawer
sides using the wood screws helps keep file folders in place.