Riverside Furniture Liam 71101 User manual

#71101
Lift - Top Cocktail Table
Riverside
Components and Hardware List
email: [email protected]
FURNITURE Made in Viet Nam
Page 1 of 2
A
Liam
Lift - Top Cocktail Table
Assembly Instructions
1 pc. B4 pcs. C1 pc.
Table Top Legs Bottom Shelf
Allen Head Bolt
Ø6 x 45mm
pc
12 s. H1
Flat Washer
Ø8 x Ø20mm
pc
12 s.
H3
Allen Key
4 x 110mm
pc
1. H4
Lock Washer
Ø9 x Ø13mm
pc
12 s. H2
Step 1: Carefully set the Table Top (A) upright and remove the security
strap.
Be sure to check all packing material carefully for small parts, which
may have come loose inside the carton during shipment.
Step 2: Place the Table Top (A) on its front edge on a clean, soft surface. Attach three legs to the Top
(A) using the Flat washer (H3), Lock washer (H2) and Bolts (H1) as shown in DETAIL A.
Do not fully tighten Bolts until fourth Leg has been attached.
CAUTION!
Do not allow children to play on the
mechanized furniture or operate the
mechanism.Top surfaces fold down on
closing, so that a child could possibly
be injured. Always leave furniture in
the closed position when unattended.
To prevent the table from tipping over,
do not place more than 30 pounds
on the top when in the open position.
KEEP HANDS CLEAR OF
MECHANISM.
H4
H1
H2
B
B
A
H3
DETAIL A
A

Step 3: Insert the Bottom Shelf (C) into the notches of the Legs (B), attaching using the Flat Washers
(H3), Lock Washer (H2) and Bolts (H1). As shown in DETAIL B.
Step 4: Attach the final Leg to the Top and Shelf as shown in Step 2 and 3. Adjust all parts for correct
fit if necessary and tighten all the Bolts with the Allen Key (H4).
Step 5: Carefully set the assembled Table upright.
H3
H4
H3
H2
H1
H1
H2
H4
H4
H1
H2
H3
C
B
A
Riverside
email: [email protected]
FURNITURE Made in Viet Nam
Page 2 of 2
Liam
Lift - Top Cocktail Table
Assembly Instructions
DETAIL B