Riverside Furniture 46130-1 User manual

Page1of2
End Frame
(Right&Left) BackStretcher
12 pcs.
M5/16"x1-3/8"
AllenHead Bolt 5/16"Spring
Washer
5mm Allen
Wrench
1pc. 8pcs.
M5/16"x5/8"
AllenHead Bolt
4pcs.
'L'Bracket
Step1.PlacetheWritingDeskTop(A)andEndFrames(B)face
downonacleanandsoftsurface.
Step2.AssembletheL-Brackets(L)totheEndFramesusing the
AllenHeadBolts(H)SpringWashers(F)andFlatWashers(E).
Check thatthey are orientedcorrectly andtightenwith theAllen
Wrench(G)asshown.
Vogue
HomeOffice
Assembly Instructions MadeinViet Nam
20 pcs. 20 pcs.
#46130-1
1pc.1pc. 2pcs.
Desk Top
5/16"x19x2mm
FlatWasher
FurnitureTipping
Restraint Kit

Page2of2
Ifitbecomesnecessarytoremoveadrawer,follow
thesesteps.Withthedrawerfullyopen,thedrawer
slidesmust bereleasedby pushing the"trigger" located
intheslideeither upor down, depending on which
slideisbeing released. With both triggerspushed,
gently pull thedrawer until theslidesrelease.
Carefully reinstall thedrawersby aligning thechannels
ofthedrawerslidesandgentlypushingthedrawers
back into thecabinet.
Step3.ConnecttheEndFrames(B)totheproperendoftheDeskTopusingtheAllenHeadBolts(D),
Spring Washers(F), andFlatWashers(E). Only partially install bolts until theentire Desk hasbeen
assembled.
Step4.InstalltheBackStretcher(C)betweenthetwoEndFrames.
Step 5. TightenBolts previously installedusing the5mm AllenWrench.
Step6.ConnecttheendsoftheBackStretcherusingtheAllenHeadBolts(H),SpringWashers(F)andFlat
Washers(E). Whilepulling endofStretcher snug to theEndFrame, tightenbolts using the4mm Allen
Wrench(G).
Carefully settheDesk
upright andreinstall
Drawersbackinto
theDesk ifnecessary.
pullout
Vogue
HomeOffice
Assembly Instructions MadeinViet Nam
#46130-2