Rixxu SC-PET01-BLK User manual
1
1Open the seat cover packaging, make sure that all components are present and not damaged.
PASSENGER FRONT PET SEAT COVER
2
2Open both zippers on the top of the cover and separate the hook and loop. Place the cover over
the headrest so that the headrest goes through the top opening in the seat cover. Attach the
hook and loop under the headrest and close zippers.
3
3Install ring anchors on the bottom of the seat between the seat cushion and the backrest. Slide
ring anchors through the seat to the back side of the seat. Once they are on the backside, rotate
the anchor 90 degrees to lock it into place.
4
5
4Bring the elastic strap around each side of the seat backrest and latch it together behind the
seat.
5Use two hooks on the front of the seat cover and latch them onto the seat frame under the seat
cushion.
Note: Do not attach hooks to any moving parts of the seat or electrical components.
6
6Make sure the seat cover is centered over the seat.
7If you want to fold up the sides of the seat cover, simply use the provided zippers located on the
seat cover backrest and cushion to hold the side panels in the upright position.
7
8
1Open the seat cover packaging and make sure that all components are present and not
damaged.
Rixxu SC-PET02-BLK
Rixxu SC-PET03-BLK
REAR PET COVER
9
2Lay the seat cover over the bench seat.
33. Slide ring anchors through the lower corner of the seat between the seat cushion and the
backrest. Once ring anchors are through the seat and protrude out the back, rotate the anchor
90 degrees to lock it into place.
10
11
4Install the retaining strap behind the headrest. Pull the elastic strap around the back of the
headrest and attach using the buckle.
12
5Install front and side straps by securing metal hooks to the seat frame underneath the cushion.
13
6Install side panels to the backrest by sliding side pieces underneath the backrest portion of the
seat cover with the hook and loop facing up. Apply slight pressure to the seat cover backrest to
secure the hook and loop.
14
7To utilize the seatbelt buckles, pull up the cover over the seat belt buckle, and pull the buckle
through the passageway on the seat cover.
15
8If you want to use the side panels in the upright position, wrap the supplied nylon strap around
the headrest, attach the clips to the loops on the front of the seat cover. You can then adjust the
length to ensure a tight fit.
16
9Zip up the zippers for the bottom pieces of the seat cover.
10 Make sure the seat cover is centered and secure.
This manual suits for next models
2
Other Rixxu Automobile Accessories manuals
