Oypla 3665 User manual

User Manual
Universal 3 Bike Tow Bar
Mount Carrier
USER MANUAL Model No: 3665

This product contains small parts that could be a choking hazard if swallowed.
Keep these items away from children.
Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
This product is not a toy, and is only to be used for its designated purpose.
Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials as these will damage the product.
Leaving the product outside exposed to weather, especially direct sun and rain will
speed the weathering process. This can be slowed by removing the product from
these conditions, or covering it with a suitable cover.
Every time before use, check the carrier for security of fittings or any sign of wear
and tear. Replace any worn or damaged parts.
DO NOT use the bicycle carrier if any parts are missing or damaged as this may
cause failure and/or personal injury.
If the load obscures the vehicle, registration plate or lights, fit an auxiliary number
plate and/or lighting system.
Avoid damage caused by hot exhaust fumes. Do not position bicycles directly next
to the vehicles exhaust, especially the bicycles tyres. If necessary, fit an exhaust
deflector.
If this product is damaged or has any defects, please contact [email protected].
USER MANUAL Model No: 3599
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3665

User Warnings:
WARNING! Due to the variety in design of vehicles and bicycles, it is the user’s full responsibility to ensure
no damage occurs whilst using this bicycle carrier. Correct attachment of carrier to a vehicle is therefore
critical and is beyond control of the manufacturer, distributor or supplier.
WARNING! The user must secure the carrier and any bicycles to be carried properly, checking the security
frequently when in use.
WARNING! The maximum weight capacity of this bike rack is 40kg. Exceeding this weight may cause
product failure and damage to your car or other road users.
WARNING! Remove any loose objects from the bicycles i.e. pumps, bottles etc.
WARNING! Avoid any protrusions beyond the side of the car as these may present a risk of injury to
passers-by.
WARNING! Drive carefully - Be aware of cross winds, sudden braking or hard cornering, reduce speed
accordingly when using carrier.
WARNING! This carrier is designed for temporary use only; remove when not in use or before going
through a car wash.
WARNING! - Remember the driver of the vehicle is responsible for the security and safety of the load
carried.
Installation Instructions
Assembly Instructions
USER MANUAL Model No: 3665
Assembly Instructions
1. Open the two suspension arms.
2. Place the safety ring (A) over your
vehicle’s tow bar, ensuring that the two
clamps (B) are positioned around the tow
ball.

Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
USER MANUAL Model No: 3665
6. Attach the bicycle holders (G) onto the
suspension arms and fix tightly using a
screwdriver.
5. Place the ring (A) onto the hooks (E)
and tighten the knob (F) to lock
everything together.
3. Fully open the main arms to tighten
the clamps (B) around the tow ball and
to lock the handle (C).
4. Secure the handle by inserting the
safety pin (D) onto the hole of the handle.
7. Place the bicycle on the carrier in the
bicycle holders.Attach the bicycle to
the holder using the straps and adjust
until the bicycle is securely held.