Roberts R9947 User manual

ROBERTS Sound for Generations
R9947
3-band PLL
Synthesised Stereo Radio

Controls ................................................... 2-3
Display ........................................................ 4
Inserting batteries ...................................... 5
Battery replacement ................................... 6
Setting the clock ........................................ 7
Setting the alarm time ................................ 9
Wake to alarm .......................................... 11
Operating your radio - search tuning ..... 12
Operating your radio -manual tuning ...... 13
MW (AM) tuning step size ....................... 14
Presetting stations ................................... 15
Recalling a preset station ........................ 16
Sleep timer ............................................... 17
Display modes .......................................... 18
Display backlight ...................................... 18
Lock switch ............................................... 19
Earphones ................................................ 20
Headphone socket ................................... 21
AC adaptor ............................................... 22
Mono button ............................................. 23
Troubleshooting/Reset button ................. 24
Specifications ........................................... 25
Guarantee ................................................. 26
1
Contents

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1. Preset button
2. Display button
3. Mono/Alarm button
4. Band/Time set button
5. On/Off button
6. Light button
7. Tuning up button
8. Tuning down button
9. Preset buttons
Controls - front
1234
7
6
5
8
9
2

10. Volume control
11. Loudspeaker/Headphone switch
12. Headphone socket
13. DC input socket
14. Lock switch
15. Telescopic Aerial
16. Earphones
10
11
12
13
14
16
15
Controls - left & right sides
3

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Display
A. Sleep time indicator
B. Alarm indicator
C. Stereo indicator
D. Key lock indicator
E. +5 indicator
F. Preset indicator
G. Low battery indicator
H. MHz/kHz indicators
I . Frequency/Time display
J . Waveband and AM/PM
indicators
ABC D E F
G
HIJ
4

1. Position your radio face down.
2. Press the catch as shown and slide in the
direction of the arrow.
3. Lift up the battery cover
4. Insert 2 x LR6 (AA) size batteries as shown
in the diagram.
5. Close the battery cover.
6. The clock will start running when the 2 LR6
(AA) size batteries are installed. When
batteries are installed for the first time the
display will show 0:00. The seconds dis-
play will start to count as soon as batteries
are installed.
Inserting batteries
5

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
6
1. The battery indicator will appear
and flash in the display when the batteries
are in need of replacement . After removing
the batteries, you have approximately 3
minutes to replace the batteries after which
clock and memory information will be lost .
Battery replacement

Note: the time can only be set with the radio
switched off.
1. Ensure that the radio is switched off.
2. Press and hold down the Time set button
until the hours digit begins to flash in the
display.
3. Whilst the hours digit is flashing adjust the
hours using the Tuning up/down buttons.
The clock uses a 12 hour display with AM/
PM indicators. Please ensure that the
correct 12 hour cycle is selected.
Setting the clock
12
3
3
7

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
4. Press the Time set button, the minute
digit begins to flash in the display.
5. Whilst the minute digit is flashing adjust the
minutes using the Tuning up/down but-
tons.
6. Press the Time set button to complete
time setting
4
5
5
6
8

1. Ensure that the radio is switched off.
2. Press and hold down the Alarm button
until the hours digit begins to flash in the
display.
3. Whilst the hours digit is flashing adjust the
hours using the Tuning up/down buttons.
Setting the alarm time
1
3
3
2
9