Rockville RPA60BT User manual

OWNER’S MANUAL
RPA60BT
2 CHANNEL RACK DJ AMPLIFIER/MIXER/RECEIVER AMP W/ USB & BLUETOOTH

Thank you for purchasing this Rockville RPA60BT 2 Channel Rack DJ Amplier/Mixer/Receiver Amp w/USB & Bluetooth.
We are very proud to bring you what we consider to be the absolute best value in pro audio equipment. Proudly conceived and developed in
the USA, Rockville pro audio equipment is designed and engineered by a team of music enthusiasts, DJ’s and musicians.
We have spared no expense in manufacturing this product to meet the highest quality standards. With proper care and installation this unit will
provide you with the highest levels of sound quality. We hope that this unit will bring you years of performance and reliability.
Our goal to you and to your audience is to hear “live performance sound” the way it was meant to be experienced.
Please read this owner’s manual carefully for proper use of your Rockville RPA60BT 2 Channel Rack DJ Amplier/Mixer/Receiver Amp w/ USB
& Bluetooth. Should you need technical assistance please call our technical help line at 1-646-758-0144, Monday through Friday, 9am to 5pm
EST.
IMPORTANT SAFETY INSTRUCTIONS
•To reduce risk of electric shock, never open the unit. There are no user serviceable parts, for service to an authorized
Rockville service center.
•Do not expose this unit to any kind of moisture.
•Do not place this unit near heat sources or expose to direct sunlight.
•Do not place anything on top of unit. Doing so will block vents and cause the unit to overheat.
•Please ensure that the unit is situated in a properly ventilated area.

RPA60BT
•Individual pre-amp output controls with control knobs
•DVD/CD RCA input
•RCA Record Line Output
•RCA sub woofer output for external sub woofer amplier
•RCA pre-amp output for adding an amplier for additional
PA speakers or monitors
•Banana plug/binding post outputs for 4 speakers*
•THD: less than 0.1%
•Input sensitivity: 400mv/33K ohm
•Frequency response: (20Hz-20KHz): ±2dB
•Signal to noise ratio: 80db
•Tone characteristic (100Hz-10KHz) ±12dB
•110v/220v switchable
•Dimensions: (W x D x H) 19˝ x 11.75˝ x 3.5˝
•Shipping weight: 15 lbs
*Optimized for SINGLE banana plugs not DUAL
Features / Specifications
•19˝ rack mountable (removable rack brackets) digital mixing receiver
•2 channel amplier, powers 4 speakers
•4 Ohms: 125w x 2 RMS / 500w x 2 Peak
•8 Ohms: 100w x 2 RMS /400w x 2 Peak
•Built in Preamplier
•Multi color LED display
•Bluetooth connectivity
•Bluetooth version 2.1
•Digital Quartz Synthesized AM/FM tuner with 50 presets & auto scan
•Preset EQ (rock, pop, classical, jazz)
•Remote control for quick access to all functions
•Vacuum Fluorescent Digital output display meters
•Separate gain controls for pre-amp & sub woofer
•Digital Karaoke system
•2 front 1/4˝ microphone inputs with volume, tone and echo controls
•Built in microphone mixer with Echo control
•USB input for music les from USB Thumb Drive (will charge iPod
but does not offer playback)
•3.5mm input for iPod/MP3 player
•Spectrum analyzer equalizer display
•Turbo cooling twin fan system
•1/4˝ headphone jack

Front Panel Functions
1
3 4 5 6 8 1110
14
12
13
7 9
2
1. Power Button
2. USB input for USB thumb drive (supports iPod charging)
3. 3.5mm iPod/MP3 input
4. 1/4˝ headphone output
5. 1/4˝ Microphone 1 input
6. 1/4˝ Microphone 2 input
7. Functions 1:
a. Previous/Next buttons: In USB mode
move forward or backwards between tracks.
When in Tuner mode move forward or backwards
between stored stations.
b. AM/FM - Play/Pause button: In USB mode plays
and pauses current track. In Tuner mode toggles
between AM and FM.
c. Auto Scan button: Scans and automatically stores
stations.
8. Vacuum Fluorescent Display
9. Functions 2:
a. Input button: Toggles between input sources (Bluetooth,
iPod/MP3 player, USB/AUX, DVD/CD, and Tuner).
b. Menu button: Controls functions of Master Volume knob
(Volume, Bass, Treble, Balance).
c. Mute button
d. LED button: Turns off LED illumination.
10. Microphone Volume control
11. Microphone Tone control
12. Microphone Echo control
13. Master Volume control: Using the Menu button to toggle
between settings, this knob can be used to adjust Bass,
Treble, and Balance.
14. Sub woofer Output Volume control.

Connections
FM Antenna
DVD/CD Player
Sub woofer
Speakers
Speakers
Power Amp
Power Amp
Power Amp Sub woofer
AM Antenna
WHEN POWERING 4 SPEAKERS MINIMUM IMPEDANCE
PER SPEAKER CAN BE NO LOWER THAN 8 OHMS.
USING 4 SPEAKERS AT 4 OHMS WILL EVENTUALLY
CAUSE UNIT FAILURE.
IMPORTANT
Recording Device or Amplifier
The record output should only be used
when connecting another device to
record your mix. It will not work as a
regular line level signal output as record
level outputs are lower power signals
than line level outputs.

RPA60BT
13
14
15
2
3
4
5
6
1
1. Mute button
2. Input button: Switch between input sources.
3. Numeric key pad: In USB mode use to manually select tracks. In
radio mode use to manually select stored stations.
4. Scan button: Scan between stations.
5. AM/FM button: Switch between AM/FM signal.
6. Menu button: Controls functions of Master Volume
(Volume, Bass, Treble, Balance).
7. Master Volume + button: Increases volume level.
8. Previous button: Move back through tracks from USB input.
9. Play/Pause button: Play and pause music from USB input.
10. EQ button: toggle between 8 preset EQ settings
11. Stop button: Stops music playing from USB input.
12. Tuning Back button: Move back through radio stations.
13. Reset button: Resets volume to 20dB.
14. Memory button: Allows user to save selected stations.
15. Stereo/Mono button: Toggles between Stereo and Mono modes.
16. Next button: Move forward through tracks from USB input.
17. Master Volume – button: Decreases volume level.
18. Repeat button: Repeats current track from USB input
19. Tuning Forward button: Move forward through radio stations.
7
8
9
10
11
12
17
16
18
19
Remote Control Functions

Bluetooth Function
1. Press the INPUT button located on the front panel select Bluetooth mode. You will hear a tone and see the word “blue” on the screen.
2. Turn on the Bluetooth feature on your device and ensure that it is in “discoverable” mode. Search for “ROCKVILLE AMP” on your list of available devices
and select it. If pairing is successful you will hear a tone. You can control all features (play/pause, next, previous, volume) via the unit or the included remote.
3. After innitial pairing, the RPA60BT will pair with your device automatically.
4. To un-pair simply disconnect the RPA60BT via your device. If un-pairing is successful, you will hear a tone.

RPA60BT

RPA60BT
Responsible party name: Rockville
Address: 600 Bayview Ave.
Entrance A
Inwood, NY 11096
Hereby declares that the product(s) RPA60BT 2 Channel Rack DJ Amplier/Mixer/Receiver Amp w/ USB & Bluetooth complies with FCC rules as
mentioned in the following paragraph:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following mea-
sures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

© 2018 ROCKVILLE // Features and specifications are subject to change and or improvement without notice.
RockvilleAudio.com