Rohde & Schwarz TopSec Mobile User manual

PAD-T-M: 3574.3259.02/01.00/CI/1/EN
R&S® TopSec Mobile
User Manual
5411.1567.02 –05.01
User Manual
Rohde & Schwarz SIT GmbH

© 2015 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Munich, Germany
Phone: [phone] - 0
Fax: [phone]
E-mail: [e-mail]
Internet: http://www.rohde-schwarz.com
Subject to change –Data without tolerance limits is not binding.
R&S®is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.

R&S TopSec Mobile Foreword
User Manual 5411.1567.02 - 05.01 3
Contents
1 Foreword ............................................................................................. 5
1.1 Support and Contact ...................................................................................................5
1.2 Device-specific Safety Instructions...........................................................................5
1.3 Opening the Device .....................................................................................................6
1.4 Transporting the Device..............................................................................................6
1.5 Cleaning........................................................................................................................6
1.6 Import and Export Regulations..................................................................................7
2Overview.............................................................................................. 8
2.1 Supported platforms ...................................................................................................9
3Setup.................................................................................................. 10
3.1 Inserting the battery ..................................................................................................10
3.2 Charging the battery..................................................................................................10
4Your TopSec Mobile ......................................................................... 12
4.1 Layout .........................................................................................................................12
4.2 Controls ......................................................................................................................12
4.3 Lanyard.......................................................................................................................12
4.4 Headset.......................................................................................................................13
4.4.1 Accept calls via headset adapter.................................................................................14
4.4.2 End call via headset adapter .......................................................................................14
5Getting started .................................................................................. 15
5.1 Switching on the device............................................................................................15
5.2 Icons............................................................................................................................16
5.3 Operation....................................................................................................................17
5.3.1 Initial state....................................................................................................................17
5.3.2 Menu navigation...........................................................................................................17
5.3.3 Entering characters......................................................................................................18
5.4 Configuration .............................................................................................................18
5.4.1 Bluetooth......................................................................................................................18
5.4.2 TopSec Phone app......................................................................................................20
5.5 Encrypted calls ..........................................................................................................21
5.5.1 Prerequisites................................................................................................................21
5.5.2 Procedure ....................................................................................................................21

R&S TopSec Mobile Foreword
User Manual 5411.1567.02 - 05.01 4
5.5.3 Call control...................................................................................................................22
5.5.4 Volume.........................................................................................................................23
6Settings.............................................................................................. 24
6.1 Bluetooth configuration............................................................................................24
6.1.1 Multiple Pairings...........................................................................................................24
6.1.2 Select active connection..............................................................................................24
6.1.3 Delete a pairing............................................................................................................24
6.2 Time and date.............................................................................................................25
6.2.1 Set time........................................................................................................................25
6.2.2 Set time format.............................................................................................................25
6.2.3 Set date........................................................................................................................25
6.3 Device name...............................................................................................................25
6.4 Keylock .......................................................................................................................26
6.4.1 Automatic keylock........................................................................................................26
6.4.2 Keylock with PIN..........................................................................................................26
6.5 Tones ..........................................................................................................................26
6.5.1 Vibration.......................................................................................................................26
6.5.2 Silent mode..................................................................................................................26
6.5.3 Select melody ..............................................................................................................27
6.5.4 Set ringtone volume.....................................................................................................27
6.6 PIN...............................................................................................................................27
6.6.1 Set PIN query...............................................................................................................27
6.6.2 Change PIN .................................................................................................................27
6.7 Rotate display ............................................................................................................28
6.8 Language....................................................................................................................28
6.9 Device Info..................................................................................................................28
7Troubleshooting ............................................................................... 29
8Technical Data .................................................................................. 31

R&S TopSec Mobile Foreword
User Manual 5411.1567.02 - 05.01 5
1Foreword
A PDF reader is required to display the documentation, e.g. Adobe Acrobat Reader
(www.adobe.com) or FoxIt Reader (www.foxitsoftware.com).
This manual describes the functionality of the TopSec Mobile with version 5.3.
1.1 Support and Contact
Rohde & Schwarz SIT GmbH
Am Studio 3 | 12489 Berlin | Germany
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]
1.2 Device-specific Safety Instructions
Beside the basic safety instructions please attend the following device specific safety
instructions:
●The TopSec Mobile must only be operated in accordance with the operating
manual.
●Do not expose the TopSec Mobile to direct sunlight or other sources of heat.
●Protect the TopSec Mobile against humidity and liquids.
●Use the approved power supply device only. The use of a different power supply
could damage the TopSec Mobile.
●Ensure that voltage supply complies with the values indicated on the power
supply.
●Use only the original battery for the TopSec Mobile.
●Remove the battery if you do not use the device for a while or if the device is
stored.

R&S TopSec Mobile Foreword
User Manual 5411.1567.02 - 05.01 6
Store without battery
Stocking the device with inserted battery may lead to a total discharge of the battery.
Due to the battery type (lithium polymer), a total discharge may damage the battery
(bloating by chemical reactions).
Remove the battery if you don’t use the device for a while or if the device is stored.
1.3 Opening the Device
The user can only open the TopSec Mobile to insert or change the battery. The device
must only be opened by personnel authorized by the manufacturer. The device must
first be removed from the mains connection (plug removed) when malfunctions are
suspected or during work on the device.
Opening the device
Manipulation to components inside the device are not permitted as these pose a threat
to the integrity of the device and to the safety of other persons.
Should water, wires or other parts have entered the device by mistake, remove the
mains connection immediately, remove the battery and contact Rohde & Schwarz SIT
support. If you use the device in this state you are endangering your safety as well as
that of others.
1.4 Transporting the Device
To transport the device, remove the battery. Only use the original packaging material
when transporting the device. Damages that occur due to the incorrect transport and
handling cannot be claimed against Rohde & Schwarz SIT GmbH.
1.5 Cleaning
If the TopSec Mobile has become wet, dry it with a soft, dry cloth.
When cleaning, only use a soft cloth.
Never use Benzol, thinner, alcohol or other solutions for cleaning purposes.

R&S TopSec Mobile Foreword
User Manual 5411.1567.02 - 05.01 7
1.6 Import and Export Regulations
The TopSec Mobile is subject to the relevant international export and national import
regulations. The country of origin for the system is the Federal Republic of Germany.
The relevant regulations of the government of the Federal Republic of Germany and
the European Community apply for export.
The appropriate legal or other requirements of the target countries must be adhered to
(import permits). Please refer to your national import licensing authority for more
detailed information.
The export and the implementation of TopSec Mobile abroad is subject to the legal
foreign trade regulations of the Federal Republic of Germany and requires the
appropriate approvals.

R&S TopSec Mobile Overview
User Manual 5411.1567.02 - 05.01 8
2Overview
The TopSec Mobile securely encrypts voice communications end-to-end on IP-based
communications networks. Users access these communications networks with the
TopSec Mobile connected to smartphones and laptops via Bluetooth.
The TopSec Mobile is easy and intuitive to operate using apps that are available for
the most widely used platforms. Because the TopSec Mobile is a smartphone-
independent encryption device, it cannot be manipulated by malware.
Users connect to IP networks via the communications terminal equipment.
Smartphones provide wireless access to UMTS networks and WLANs. Laptops
generally have a LAN port in addition to enable a wireline connection to IP networks.
To place and receive VoIP calls, users must be registered on a R&S®VoIP SERVER.
For setup of encrypted connections, the commonly used signaling protocols SIP and
IAX2 can be configured.

R&S TopSec Mobile Overview
User Manual 5411.1567.02 - 05.01 9
2.1 Supported platforms
To use the TopSec Mobile you will need a R&S®VoIP SERVER and the TopSec
Phone app, which is supported on a wide range of platforms. Mandatory platform
requirements are listed below:
●Android Version 2.2 and above
─TopSec Phone for Android v2.1.19
─EDGE, UMTS or LTE cellular data with support for VoIP or WLAN
●Android Version 4.1 and above
─TopSec Phone for Android v3.0.0
─EDGE, UMTS or LTE cellular data with support for VoIP or WLAN
●Blackberry Version 10.3.1 and above
─TopSec Phone for Android v3.0.0
─EDGE, UMTS or LTE cellular data with support for VoIP or WLAN
●iOS Version 7 and above
─TopSec Phone for iPhone v1.2.0
─EDGE, UMTS or LTE cellular data with support for VoIP and internet sharing
(Personal Hotspot)
●Windows 7, Windows 8, Windows 8.1
─TopSec Phone for Windows PC v1.1.0
─EDGE, UMTS or LTE cellular data with support for VoIP, WLAN or LAN
●Windows Phone 8.1
─TopSec Mobile v5.3.0 and above
─TopSec Phone for Windows Phone v1.0.0
─R&S®VoIP SERVER v3.3.1 and above
─EDGE, UMTS or LTE cellular data with support for VoIP or WLAN

R&S TopSec Mobile Setup
User Manual 5411.1567.02 - 05.01 10
3Setup
The following chapter describes how to insert and charge the battery in the
TopSec Mobile.
3.1 Inserting the battery
1. Remove the battery cover from your device. Using your thumb, press the
Rohde & Schwarz® logo and pull the cover out from under the clip.
2. Insert the battery into the device. The electric contacts must point towards the clip.
The Rohde & Schwarz® lettering should remain visible.
3. Push back the cover under the clip.
3.2 Charging the battery
To charge the battery, plug the data/charging cable into the jack provided on the
device.
1. Either plug the data/charging cable with the USB connector into the supplied
power supply or into the USB interface of a computer.
2. Connect the other end of the data/charging cable to the jack on the
TopSec Mobile device.
3. The charging cycle starts and the charging icon appears in the display, see
chapter 5.2 Icons.
It can take up to five hours to charge the battery, depending on its current state. If the
battery is being charged for the first time, no battery charging icon may appear initially
on the display when the power supply is connected. In this case, please wait a
moment.
The TopSec Mobile can be used during charging if the battery is sufficiently charged,
but charging time may be increased.