Roidmi CFJ02RM Series User manual

Please read this manual carefully before starting
to use the product and keep it for future reference
High Speed Hair Dryer
Scan the QR code for manuals
in multiple languages

EN .........................................................Page 1 - 14
ES .................................................... Página 15 - 29

1
CONTENTS
Product Introduction
.............................................. 2
Product Use ......................................................... 2
Product Cleaning ................................................... 3
Basic Parameters................................................... 4
Warranty Description.............................................. 4
EU DECLARATION OF CONFORMITY........................ 5
Product performance failure table ............................. 6
Product warranty card ............................................ 6
Product maintenance record .................................... 7
CAUTION ............................................................ 8
Safety Precautions ................................................. 9
WARNING............................................................ 9

Product Introduction
Air-Collecting Nozzle
Power Cable
Air Outlet
Magnetic Ring
Air Inlet Filter Cover
Mode Switch Button
Power Switch
Indicator Light
12
3
5
6
7
8
4
1
2
3
4
5
6
7
8
Product Use
To connect the accessory, you can align the air collector to the magnetic
ring, the accessory will be attached instantly；push up to turn on, push
down to turn off；
Turn Off
Turn On
Push up to turn on Push down to turn off
2

Mode Switch Button
1. In the running state, short press the "mode switch button", it will switch to the next
mode, and it will cycle through cold air - warm air - hot air - alternating hot and
cold air；
2. In the running state, press and hold the "mode switch button" for 1 second
to turn off the heating in the current mode and only blow air；
Blue Red Gradient Alternating Hot And Cold Wind
White Light Turn Off Heat, Blow Only
Status Indicato
Wind Temperature State
Blue Light Cold Wind
Yellow Light Warm Air
Red Light Hot Air
Short Press
Mode Switch
Long Press To
Turn Off Heating
Product Cleaning
Before cleaning the product, please make sure to unplug
the product from the power socket. Clean it when it’s turned
off and after it’s cooling down;
1.Wipe the air outlet with a paper towel or towel to remove the attachments
such as dust or hair.
2.Use dry lint-free cloth, soft brush, toothbrush and other tools to remove
the attachments on the surface of the stainless steel filter screen at the air
inlet.
3

1. After use, please be sure to turn off the power and unplug the socket.
2. It is recommended to clean it regularly. Remove any dust. Any foreign
objects attached or blockage.
3. Do not clean the filter with water.
CAUTION
Product Name
Product Model CFJ02RM/CFJ02RMG/CFJ02RM*
High Speed Hair Dryer
Rated Voltage
233×91×62mmDimensions
220-240V~
Rated Frequency 50/60Hz
Rated Power 1300W
Basic Parameters
Warranty Description
This product is guaranteed for a period of 12 months(defined by local
law)from the date of purchase against any failure resulting from
manufacturing or material defects.
This warranty does not cover damage caused by improper installation,
improper use, or normal wear and tear of the product.More specifically,
the warranty does not cover:
Damage or problems caused by improper use , accident , alteration or
electrical connection of improper intensity or voltage.
Modified products , those whose warranty sel or serial number have
been damaged , altered , removed or oxidized.
Failure of the battery due to overcharging or failure to observe the safety
instructions explained in the instruction manual.
Cosmetic damage , including scratches , dents , or any other element .
Damage caused by any intervention carried out by an unauthorised
person.
Defects caused by normal wear and tear or due to normal ageing of the
product .
Software updates due to a change in network setting.
Product failures due to the use of third party software to modify ,change
or adapt the existing software.
Product failures caused by use without accessories approved by the
manufacturer.
Oxidised products .
4

5
EU DECLARATION OF CONFORMITY
Equipment
Product: High Speed Hair Dryer
Model: CFJ02RM,CFJ02RMG,CFJ02RM*
Manufacturer
Name: ROIDMI INFORMATION TECHNOLOGY CO., LTD.
Address: 4F,C8 BUILDING,NO.1699 HUISHAN ROAD,LIFE SCIENCE
AND TECHNOLOGY PARK,HUISHAN DISTRICT, WUXI,
JIANGSU,PRC
Country: China
This declaration of conformity is issued under the sole responsibility of
the manufacturer.
The object of the declaration described above is in conformity with the
following relevant Union harmonisation legislation(s):
References to the relevant harmonized standards used, including
the date of the standard, or references to the other technical
specifications, including the date of the specification, in relation
to which conformity is declared:
Name of directive No.
Radio Equipment Directive (RED)
Low Voltage Directive (LVD)
Electromagnetic Compatibility (EMC)
Restriction of the use of certain hazardous
substances (RoHS)
Ecodesign Requirements for energy-related
products (ErP)
Labelling and Standard product information
of the consumption of energy and other resources
by energy-related products (Energy Label)
Machinery (MD)
Toys safety
Packaging and packaging waste
2014/53/EU
2014/35/EU
2014/30/EU
2011/65/EU
2009/125/EC
2010/30/EU
2006/42/EC
2009/48/EC
94/62/EC
√
√
√
√
Harmonized Standard Notify body
EN 50564:2011 TUV
TUV
TUV
TUV
EN60335-1:2012/A15:2021
EN 60335-2-23:2003/A2:2015
EN 62233:2008
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 6100-3-2:2019/A1:2021
EN6100-3-3:2013/A2:2021
2011/65/EU
Signed for and on behalf: ROIDMI INFORMATION TECHNOLOGY
CO., LTD.
Place and date of issue: 4F,C8 BUILDING,NO.1699 HUISHAN ROAD,
LIFE SCIENCE AND TECHNOLOGY PARK,
HUISHAN DISTRICT, WUXI,JIANGSU,PRC
2022-10-27
Signature: ____________________________________
Name, function: John Wang, Chief Executive Officer

Product performance failure table
Terms and conditions of implementation:
To obtain a warranty service, you are requested to return your product
to the customer service desk of your retail outlet with your proof of
purchase(receipt, invoice,....),the product and its supplied accessories,
with its original packaging.
It is important to have the date of purchase ,the model and the serial or
IMEI number on hand as information( this information usually appears
on the product, the packaging or your proof of purchase).
Failing this, you must return the product with the accessories necessary
for its proper operation(power supply, adaptor, etc.).
In the event that your claim is covered by the warranty, the after-sales
service may, within the limits of local law, either:
Repair or replace defective parts.
Exchange the returned product with a product that has at least the same
functionality and that is equivalent in terms of performance.
Refund the product at the purchase price of the product mentioned
on the proof of purchase.
If one of these 3 solutions is used, this does not give rise to the extension
or renewal of the warranty period.
Name
Cannot turn on/off under normal use
The temperature control button does not work under normal use
Performance failure
High Speed
Hair Dryer When the machine is running, the heating wire does not work,
and the abnormal alarm prompts (the red light flashes)
When the machine is running, the NTC thermal protection fails,
and the abnormal alarm prompts (yellow light flashes)
6
Product warranty card
Username Product name and model
Product host serial number
Product purchase date
Mailing address
Contact details
This warranty card contains consumer personal information, please keep it
properly by yourself

Manufacturer:ROIDMI INFORMATION TECHNOLOGY CO., LTD.
Address: 4F,C8 BUILDING,NO.1699 HUISHAN ROAD,LIFE SCIENCE AND
TECHNOLOGY PARK,HUISHAN DISTRICT,WUXI,JIANGSU,PRC
Executive Standard: EN 50564:2011 EN 60335-2-23:2003/A2:2015 EN 62233:2008
EN60335-1:2012/A15:2021 EN IEC 55014-1:2021 EN IEC 55014-2:2021 2011/65/EU
EN IEC 6100-3-2:2019/A1:2021 EN6100-3-3:2013/A2:2021
Service Email : [email protected]
Enterprise Website: www.roidmi.com/en
No.03.2023
Made in China
Product maintenance record
Repair centre Repair date
Replacement
parts
Fault
description Maintenance engineer
7
CLASS II EQUIPMENT
CORRECT DISPOSAL
OF THIS PRODUCT FOR INDOOR USE ONLY

1. Do not use and store this product
under extreme adverse conditions,
such as extreme temperatures, etc.
It is recommended to use it at an
ambient temperature of 0-35°C
indoors. Please store it in a cool and
dry place；
2. Do not swing the body and let
children play with it ( to avoid the
damage to the body)；
3. Avoid dropping this product and
colliding with other objects, or
applying pressure to this product
(to avoid fire and electric shock due
to malfunction)；
4. The parameters in the instructions
are only measured in a laboratory
environment, and the parameters
will be slightly different on each
ndividual product；
5. The illustrations of products,
accessories, user interface, etc. in
the manual are schematic diagrams
and are for reference only. Due to
the update and upgrade of the
product, the actual product may be
slightly different from the schematic
diagram, please refer to the actual
product.
8
CAUTION

1. Host and some accessories
like air collector contain nozzle
magnets. Keep it away from
pacemakers,the defibrillators,
credit cards and electronic
storage devices；
2.
Do not place sharp metal
objects such as pins near the
hair dryer to avoid being
adsorbed on the machine and
causing harm to you.
3. Do not use this product in
Safety Precautions
In order to avoid accidental
injuries such as electric shock
or fire caused by improper use,
please read the instruction
manual carefully before use
and keep it properly for future
reference.
9
WARNING

10
an environment with water
near water sources (bathtub,
shower,etc.) or in an environment
with flammable sources
(aerosol, spray);
4. Do not pull or stress the
power cord, or wrap the power
cord on the product; do not
place the product close to a
heat source or place it in a
place that may damage its
protective ability.
5. Do not use the hairdryer
for any purpose other than
drying hair, such as drying
clothes or other items；
6. Do not use on infants or
pets to avoid burns；
7.This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or

11
mental capabilities or lack of
experience and knowledge
iftheyhavebeengivensupervision
or instruction concerning
use of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
8. For additional protection,
it is recommended to install
a residual current device (RCD)
with a rated residual operating
current not exceeding 30mA
in the electrical circuit of the
bathroom, consult the RCD
installer；
9.This product is equipped
with an automatic reset
thermal safety cut-off device

12
to prevent overheating.
10. This product is equipped
with an abnormal automatic
protection function. If the
product is cut off due to
overheating, please pull out
the plug from the power outlet,
let it cool down, and contact
customer service;
11. Please be sure to connect
the original power plug to the
rated power supply, and ensure
that it is inserted all the way to
avoid short circuit; and do not
touch the plug or the live part
of the product with wet hands
to prevent electric shock;
12. Do not block the air inlet
or outlet during use, and
regularly check and clean the
air inlet and outlet to maintain
the service life and safety of

13
the hair dryer;
13. The air outlet and metal
parts may be hot during use.
Please do not touch it to avoid
burns；
14. After using it in the bathroom,
please unplug it for the safety
；
15. Do not immerse the main
body of the hair dryer with
electrical components in water
or other liquids for cleaning.
When the hair dryer falls into
the water, please unplug it
immediately, and do not
continue to use it even after
drying;
16. Do not use any lubricants,
cleaners, polishes or air
fresheners on any part of this
product;
17. If the hair dryer is abnormal
or the power cord is damaged,

WARNING :
"Do not use
this appliance near water"
14
in order to avoid danger, do
not disassemble it by yourself,
and must be replaced by the
manufacturer or its maintenance
department professionals;
18. Please pull out the plug
from the socket before abnormal
fault maintenance or cleaning,
so as to avoid smoke, fire
and electric shock;
19. No action needed from
users to shift the product
between 50 and 60Hz, product
can adapt itself for both 50
and 60Hz;

Introductión
........................................................16
Uso del Producto ..................................................16
Limpieza del Producto ........................................... 17
Parámetros Básicos .............................................. 18
Descripcion Garantía ............................................ 18
EU DECLARACION DE CONFORMIDAD ....................19
Tabla De Errores De Rendimiento Del Producto ...........20
Tarjeta De Garantía de Producto ..............................20
Registro de mantenimiento del producto .................... 21
CAUTION ...........................................................22
Precauciones de seguridad .....................................23
ADVERTENCIA ....................................................23
15
CONTENIDO

Introductión
Colector de aire
Cable Alimentación
Salida de Aire
Anillo Magnetico
Tapa filto de Aire
Botón interruptor
Botón encendido
Indicador de luz
12
3
5
6
7
8
4
1
2
3
4
5
6
7
8
Uso del Producto
Para conectar el accesorio, puede alinear el colector de aire con el anillo
magnético, el accesorio se conectará instantáneamente; presione hacia
arriba para encender, presione hacia abajo para apagar
Apadado
Encendido
Presione hacia arriba Presione hacia abajo
16

Botón De Cambio De Modo
1. En el estado de funcionamiento, presione brevemente el "botón de
cambio de modo", cambiará al siguiente modo y cambiará a aire frío - aire
tibio - aire caliente - alternando aire frío y caliente.
2. En el estado de funcionamiento, mantenga presionado el "botón de cambio
de modo" durante 1 segundo, dejara de salir aire caliente y solo soplara aire.
Luz Azul-Roja Alternancia De Aire Frío Y Caliente
Luz Blanca Sin Aire caliente, Solo Aire
Indicador estado
Estado de la temperatura del aire
Luz Azul Aire frio
Luz Amarilla Aire Calido
Luz Roja Aire Caliente
Presión suable
cambio de modo
Presión continua
para apagar
Limpieza del Producto
Antes de limpiar el producto, asegúrese de desenchufarlo
de la toma de corriente. Límpielo cuando esté apagado y
después de que se enfríe.
1.Limpie la salida de aire con una toalla de papel o una toalla para eliminar
los accesorios como el polvo o el cabello.
2.Use un paño seco sin pelusa, un cepillo suave, un cepillo de dientes
y otras herramientas para limpiar la superficie de la malla del filtro de
acero inoxidable en la entrada de aire.
17

1. Después de su uso, asegúrese de apagarlo y desenchufar el enchufe
2. Se recomienda limpiarlo regularmente. Elimine cualquier polvo.
Cualquier objeto extraño adherido o que bloquee.
3. No limpie el filtro con agua.
PRECAUCION
Nombre Del producto
Modelo CFJ02RM/CFJ02RMG/CFJ02RM*
Secador de pelo de alta velocidad
Voltage
233×91×62mmDimensiones
220-240V~
Frequency 50/60Hz
Potencia 1300W
Parámetros Básicos
Descripcion Garantía
Este producto tiene una garantía por un período de 12 meses (definido
por la ley local) a partir de la fecha de compra contra cualquier falla
que resulte de defectos de fabricación o materiales.
Esta garantía no cubre los daños causados por una instalación incorrecta,
un uso inadecuado o el desgaste normal del producto. Más específicamente,
la garantía no cubre:
Daños o problemas causados por uso inadecuado, accidente, alteración
o conexión eléctrica de intensidad o voltaje inadecuado.
Productos modificados, aquellos cuyo sello de garantía o número de
serie hayan sido dañados, alterados, removidos u oxidados.
Avería de la batería por sobrecarga o incumplimiento de las instrucciones
de seguridad explicadas en el manual de instrucciones.
Daño cosmético, incluyendo rayones, abolladuras, o cualquier otro elemento.
Daños causados por cualquier intervención realizada por una persona no
autorizada.
Defectos causados por el uso y desgaste normal o por el envejecimiento
normal del producto.
Actualizaciones de software debido a un cambio en la configuración de la red.
Fallos del producto debido al uso de software de terceros para modificar,
cambiar o adaptar el software existente.
Averías del producto provocadas por el uso sin accesorios homologados
por el fabricante, Productos oxidados.
18