Roland BOSS KATANA-50 Mk II Operating and maintenance manual

SERVICE NOTES
Issued by RJA
Copyright © 2019 Roland Corporation
All rights reserved. No part of this publication may be reproduced in any form without the written permission
of Roland Corporation.
CC-KWS17057241E0
Oct. 2019 KTN-50_2
Table of Contents
Cautionary Notes ..............................................................2
Specifications .....................................................................3
Location of Control (Top) ................................................4
Location of Control Parts List (Top)...............................4
Location of Control (Rear) ...............................................5
Location of Control Parts List (Rear)..............................5
Exploded View (Cabinet).................................................6
Exploded View Parts List (Cabinet) ...............................7
Disassembly Procedure....................................................7
Note on Disassembly........................................................7
Important Notes on Assembly ........................................7
Plain View (Cabinet: 1).....................................................8
Plain View (Cabinet: 2).....................................................9
Exploded View (Chassis) ...............................................10
Exploded View Parts List (Chassis)..............................11
Plain View (Chassis: 1) ...................................................12
Plain View (Chassis: 2) ...................................................13
Wiring Diagram...............................................................14
Block Diagram .................................................................16
Parts List ...........................................................................18
Verifying the Version......................................................21
Data Backup and Restore Operations ..........................21
System Update Procedure..............................................21
Performing a Factory Reset............................................21
Test Mode .........................................................................22
Circuit Board (Main Board) ...........................................28
Circuit Diagram (Main Board: 1/3)..............................30
Circuit Diagram (Main Board: 2/3)..............................32
Circuit Diagram (Main Board: 3/3)..............................34
Circuit Board (Panel, Amp, Input, Fuse Board)..........36
Circuit Diagram (Panel Board)......................................38
Circuit Diagram (Amp Board).......................................40
Circuit Diagram (Input Board)......................................41
Circuit Diagram (Fuse Board) .......................................41

2
Oct. 2019 KTN-50_2
Cautionary Notes
Before beginning the procedure, please read
through this document. The matters described may
differ according to the model.
Back Up User Data!
User data may be lost during the course of the procedure. Refer to Data
Backup and Restore Operations (p. 21) in the Service Notes and save the
data. After completing the procedure, restore the backed-up data to the
product.
Part Replacement
When replacing components near the power-supply circuit or a heat-
generating circuit (such as a circuit provided with a heat sink or including a
cement resistor), carry out the procedure according to the instructions with
respect to the part number, direction, and attachment position (mounting so as
to leave an air gap between the component and the circuit board, etc.).
Parts List
A component whose part code is ******** will not be supplied as a service part
because one of the following reasons applies.
• Because it is supplied as an assembled part (under a different part code).
• Because a number of circuit boards are grouped together and supplied as
a single circuit board (under a different part code).
• Because supply is prohibited due to copyright restrictions.
• Because reissuance is restricted.
• Because the part is made to order (at current market price).
• Because it is carried in electronic data on the Roland web site.
• Because it is a package or an accessory irrelevant to the function
maintenance of the main body.
• Because it can be replaced with an article on the market. (battery or etc.)
• Because it is sold as a product.
Circuit Diagram
In the circuit diagram, “NIU” is an abbreviation for “Not in Use,” and
“UnPop” is an abbreviation for “Unpopulated.” They both mean non-mounted
components. The circuit board and circuit board diagram show silk-screened
indications, but no components are mounted.
There are cases that the circuit diagrams are omitted. This omission will
happen to the highly integrated digital circuit boards (e.g. Main Board etc) that
are virtually impossible to repair nor analyze.
Roland Japan Warranty
Please send the problem report with followings when the defect occurred
within one year from production and within one month from the first
customer’s purchase.
• Model name:
• Serial number:
•Version:
• Purchase date by the first customer: yyyy/mm/dd
•Symptom:
• Frequency: always, sometimes or seldom
• Confirmed the symptom at your service dept: Yes/No
Please send the problem report to [email protected].

3
Oct. 2019 KTN-50_2
Specifications
BOSS KATANA-50 Mk II: Guitar Amplifier
Rated Power Output
50 W
Nominal Input Level
INPUT: -10 dBu (1 MΩ)
AUX IN: -10 dBu
Speaker
30 cm (12 inches) x 1
Controls
POWER switch
MASTER knob
POWER CONTROL switch (STANDBY, 0.5 W, 25 W, 50 W)
AMPLIFIER
VARIATION button
AMP TYPE switch (ACOUSTIC, CLEAN, CRUNCH, LEAD, BROWN)
GAIN knob
VOLUME knob
EQUALIZER
BASS knob
MIDDLE knob
TREBLE knob
MULTI EFFECT
BOOSTER button
MOD button
FX button
DELAY button
REVERB button
TAP button
BOOSTER knob
MOD knob
FX knob
DELAY knob
REVERB knob
TONE SETTING
CH1 button
CH2 button
PANEL button
Indicators
VARIATION
BOOSTER
MOD
FX
DELAY
REVERB
TAP
CH1
CH2
PANEL
Connectors
INPUT jack: 1/4-inch phone type
POWER AMP IN jack: 1/4-inch phone type
REC OUT/PHONES jack: Stereo 1/4-inch phone type
EXP PEDAL/CTL CH1/CH2 jack: 1/4-inch TRS phone type
AUX IN jack: Stereo miniature phone type
USB port: USB B type
AC IN jack
Power Consumption
47 W
Dimensions
470 (W) x 238 (D) x 398 (H) mm
18-9/16 (W) x 9-3/8 (D) x 15-11/16 (H) inches
Weight
11.6 kg
25 lbs 10 oz
Accessories
Owner’s Manual (#5100068139, #5100068163)
Power cord (#00894378, #5100029165, #5100012292, #00894389, #00907001,
#5100013842, #03450323, #5100013648)
Options (sold separately)
Footswitch: BOSS FS-5L, BOSS FS-6, BOSS FS-7
Expression pedal: Roland EV-5, BOSS EV-30, BOSS FV-500L, BOSS FV-500H
* 0 dBu = 0.775 Vrms
* Printed matters will not be supplied after the end of the production. Then,
download the electronic file from the Roland web site.
* In the interest of product improvement, the specifications and/or appearance of
this unit are subject to change without prior notice.

4
Oct. 2019 KTN-50_2
Location of Control (Top)
fig.panel-top.eps
Location of Control Parts List (Top)
3 42
6 7 98 101 11
1 5
No. Part Code Part Name Description Q’ty
1 5100052217 C-KEYTOP 2
01780101 TACT SWITCH SKQKABD010 2
5100003359 LED(RED) L-34ID (153-L-34IDSLLF) 2
5100044430 LED SPACER LEDH-1.5 2
2 5100052214 R-KNOB INDEX 6
5100067364 ROTARY POTENTIOMETER RV09BDF-40E1-15F-0B10K-003 6
******** VR NUT (M9) attached to VR 6
3 5100052217 C-KEYTOP 5
01780101 TACT SWITCH SKQKABD010 5
05011067 LED L-3WEGW (153-L-3WEGW) 5
5100004371 LED SPACER LK-36-2 5
4 5100052218 S-KEYTOP 2
01780101 TACT SWITCH SKQKABD010 2
5100003359 LED(RED) L-34ID (153-L-34IDSLLF) 2
5100044430 LED SPACER LEDH-1.5 2
5 5100052218 S-KEYTOP 1
01780101 TACT SWITCH SKQKABD010 1
05011067 LED L-3WEGW (153-L-3WEGW) 1
5100004371 LED SPACER LK-36-2 1
6 5100024419 6.5MM JACK PJ-644C-04-EP(610-11020-01-00) 1
5100046593 JACK SPACER 1
******** JACK NUT attached to JACK 1
******** JACK WASHER attached to JACK 1
7 5100052214 R-KNOB INDEX 1
5100052460 ROTARY POTENTIOMETER RD901F-40-15F-B10K-05D60A 1
******** VR NUT (M7) attached to VR 1
8 5100067440 R-KNOB inside 2
5100067443 O-KNOB outside 2
5100067365 ROTARY POTENTIOMETER RD912DF-40E1-15F-0B10K-60D0C5 2
******** VR NUT (M9) attached to VR 2
9 5100052214 R-KNOB INDEX 1
5100067363 ROTARY POTENTIOMETER RV09BDF-40E1-15F-2B20K-003 1
******** VR NUT (M9) attached to VR 1
10 5100049813 INDEX KNOB 1
5100052466 ROTARY POTENTIOMETER RD901F-40-125F-B10K-04D60A 1
******** VR NUT (M7) attached to VR 1
11 02897801 SEESAW SWITCH SDDJE13200 94V-0 1
5100046595 POWER SW ESCUTCHEON 1
5100046598 POWER SW CUSHION 2

5
Oct. 2019 KTN-50_2
Location of Control (Rear)
fig.panel-rear.eps
Location of Control Parts List (Rear)
1
3 4
2
5
No. Part Code Part Name Description Q’ty
1 5100051443 AC INLET M1909-C 1
2 5100024419 6.5MM JACK PJ-644C-04-EP(610-11020-01-00) 1
5100046593 JACK SPACER 1
******** JACK NUT attached to JACK 1
******** JACK WASHER attached to JACK 1
3 5100009531 USB CONNECTOR B TYPE FEMALE YKF45-0044N 1
4 5100067366 3.5MM JACK YKB21-5457N 1
5 5100031944 6.5MM JACK PJ-644C-EP 2
5100046593 JACK SPACER 2
******** JACK NUT attached to JACK 2
******** JACK WASHER attached to JACK 2

6
Oct. 2019 KTN-50_2
Exploded View (Cabinet)
fig.bunkai-all.eps
Refer to Chassis
1
4
2
3
7
6
9
6
10
5
8
View 1
View 2
View 8
View 7
View 4 View 3
View 6
View 5

7
Oct. 2019 KTN-50_2
Exploded View Parts List (Cabinet)
Disassembly Procedure
Detaching the Chassis Assy
1. Detach the speaker wirings from the speaker.
2. Remove screws and washers e(x 2) in View 3. (Plain View (Cabinet: 1)
(p. 8))
3. Remove screws a(x 4) in View 1. (Plain View (Cabinet: 1) (p. 8))
4. Pull out the Chassis Assy.
* The speaker can be taken out at this status.
Detaching the Circuit Boards
1. Detach the Chassis Assy. (As described earlier)
2. Remove screws q(x 7) in View 4. (Plain View (Chassis: 1) (p. 12))
3. Detach the Chassis Cover Board and disconnect the connector (x 1).
* When detaching the circuit boards, remove screws from the outside of the
Chassis.
Detaching the Net Board
1. Detach the Chassis Assy. (As described earlier)
2. Remove screws and washers i(x 4) in View 7. (Plain View (Cabinet: 2)
(p. 9)).
3. Remove nuts and washers b(x 2) in View 2. (Plain View (Cabinet: 1) (p.
8))
4. Push the Net Board to the front side.
Important Notes on
Disassembly
Discharge of Amp Board
When detaching the Amp Board after applying electric charge, it is first
necessary to discharge the accumulated electric charge. For detail
information, refer to the Service Information No. 104784.
Important Notes on
Assembly
When winding the wirings to the FERRITE CORE (#5100068863),
disengage the FERRITE-CORE from the board around 15–25 mm, then
secure it with a cable tie (#40016523).
fig.kumi-50.eps
No. Part Code Part Name Description Q’ty
5100067716 CABINET ASSY 1
* This unit includes the following parts.
1 5100052235 TRIM SASH 1
2 5100049817 HANDLE 1
4******** CABINET 1
5******** NET BOARD 1
6 5100052238 CORNER PROTECTOR 8
7 5100052237 BOSS BADGE 1
8 5100067502 KATANA2 BADGE 1
9 5100060776 FOOT F1692 4
3 5100068138 SPEAKER W1204-067B 1
10 5100068140 LABEL SPEAKER MAGNET 1
15~25 mm

8
Oct. 2019 KTN-50_2
Plain View (Cabinet: 1)
fig.heimen1.eps
View 1
View 2
View 3
View 4
f f f f
a
c
g
b
d e
h
View 1
View 3 View 4
View 2
No. Part Code Part Name Description Q’ty
a 40010689 SCREW 4X25 TRUSS TAPPING A FE BZC 4
No. Part Code Part Name Description Q’ty
b 5100053056 NUT M4 W/SW BZC 2
5100053055 PLAIN WASHER 4.2X14X1.0 BZC 2
c 40010390 SCREW M5X25 BINDING MACHINE FE BZC 4
No. Part Code Part Name Description Q’ty
d 5100053052 SCREW 3X14 TRUSS TAPPING A BZC 4
e 5100047173 SCREW M4X25 OVAL MACHINE NI 2
5100041078 ROSETTE WASHER M4 NI (MC-15042-20303-000) 2
f 5100043887 SCREW 3.5X16 TRUSS TAPPING A NI 4
g 5100048333 SCREW M4X15 OVAL MACHINE NI 4
No. Part Code Part Name Description Q’ty
f 5100043887 SCREW 3.5X16 TRUSS TAPPING A NI 4
h 40010678 SCREW 4X20 TRUSS TAPPING A FE BZC 4

9
Oct. 2019 KTN-50_2
Plain View (Cabinet: 2)
fig.heimen2.eps
View 5, View 6
View 7
View 8
f f f f
i
k
View 5 View 6
View 8View 7
No. Part Code Part Name Description Q’ty
f 5100043887 SCREW 3.5X16 TRUSS TAPPING A NI 8
No. Part Code Part Name Description Q’ty
i 5100033930 SCREW 4X25 TRUSS TAPPING A NI 4
5100053053 PLAIN WASHER 4.2X14X1.0 NI 4
No. Part Code Part Name Description Q’ty
k 40011323 SCREW 3X10 BINDING TAPTITE P BZC 3
40457245 PLAIN WASHER 3X12X1 ZC 3

10
Oct. 2019 KTN-50_2
Exploded View (Chassis)
fig.bunkai-chasis.eps
17
4
24
1
2
3
5
6
11
29
7
8
28
12
13
30
31
18
19
23
27
20
21
10
22
26
16
9
25
14
15
15
15
15
u
v
28
View 2
View 5
View 4
View 7
View 3 View 1
View 6
x y
y
w
z
w
z

11
Oct. 2019 KTN-50_2
Exploded View Parts List (Chassis)
No. Part Code Part Name Description Q’ty
1 5100067440 R-KNOB 2
2 5100067443 O-KNOB 2
3 5100049813 INDEX KNOB 1
4 5100052214 R-KNOB INDEX 8
5 02897801 SEESAW SWITCH SDDJE13200 94V-0 1
6 5100046595 POWER SW ESCUTCHEON 1
7 5100046598 POWER SW CUSHION 2
8 5100051443 AC INLET M1909-C 1
9 5100067407 CHASSIS 1
10 5100068863 FERRITE-CORE ESD-R-14E 1
11 5100052217 C-KEYTOP 7
12 5100052218 S-KEYTOP 3
5100067612 PANEL SHEET ASSY 1
* This unit includes the following parts.
13 ******** PANEL BOARD 1
14 ******** INPUT BOARD 1
18 ******** FUSE BOARD 1
23 ******** AMP BOARD 1
15 5100046593 JACK SPACER 4
16 5100067610 MAIN BOARD ASSY 1
17 5100051957 POWER TRANSFORMER 100/117V for low voltage 1
5100051960 POWER TRANSFORMER 225/240V for high voltage 1
19 5100052247 TRANS SHEET 1
20 5100068387 CHASSIS COVER BOARD 1
21 5100051955 POWER IC HOLDER included in AMP BOARD (23) 1
22 5100052288 POWER IC SHEET 1
24 5100052223 HEATSINK 1
25 40013812 CAUTION SEAL IEC #142 1
26 40122534 DOUBLE-FACED TAPE #500 W3MM 20M 136P -
27 5100068019 TOP CUSHION L 1
28 5100052229 TOP CUSHION S 2
29 5100049090 CU-CR-F 16X9X0.5 2
30 5100067958 EVA PACKING 170X10X0.5 1
31 40122612 ACETATE TAPE NITTO #5 BLACK W10MM 30M -
u 5100050484 HEX NUT M4 W/SPW ZC 1
v 40011889 EXTERNAL TOOTH WASHER M4 FECM 1
w******** JACK NUT attached to JACK 4
x******** VR NUT (M9) attached to VR 9
y******** VR NUT (M7) attached to VR 2
z******** JACK WASHER attached to JACK 4

12
Oct. 2019 KTN-50_2
Plain View (Chassis: 1)
fig.heimen-chasis1.eps
View 1
View 2
View 3
View 4
mo
o
q
n
r q
o
p
d
View 1
View 3
View 2
View 4
No. Part Code Part Name Description Q’ty
m 40011423 SCREW M3X6 PAN SEMS FECM 3
No. Part Code Part Name Description Q’ty
n 40011156 SCREW 3X8 FLAT TAPTITE B BZC 2
o 40012945 SCREW M3X6 PAN MACHINE W/SW+PW BZC 5
No. Part Code Part Name Description Q’ty
o 40012945 SCREW M3X6 PAN MACHINE W/SW+PW BZC 8
p 40013001 SCREW M4X8 PAN MACHINE W/SW+PW BZC 4
No. Part Code Part Name Description Q’ty
d 5100053052 SCREW 3X14 TRUSS TAPPING A BZC 6
q 40564556 SCREW M3X15 PAN MACHINE W/SW FW ZC 7
r 40011789 NUT M3 HEX ZC 2

13
Oct. 2019 KTN-50_2
Plain View (Chassis: 2)
fig.heimen-chasis2.eps
View 5
View 6
View 7
q
s
s
t
View 5
View 7
View 6
No. Part Code Part Name Description Q’ty
q 40564556 SCREW M3X15 PAN MACHINE W/SW FW ZC 2
No. Part Code Part Name Description Q’ty
s 40017934 SCREW M3X6 PAN MACHINE W/SW+PW(L) FE ZC 6
22150501 STANDOFF M3-L5.5-H10 (BS) 6
No. Part Code Part Name Description Q’ty
t 40017934 SCREW M3X6 PAN MACHINE W/SW+PW(L) FE ZC 2
22150517 STANDOFF M3 L8 2

14
Oct. 2019 KTN-50_2
Wiring Diagram
fig.wiring-50.eps
L
N
E
Panel Board
Main Board
Power SW
Inlet
Amp Board Fuse BoardTransformer
Input
Board
CN901(L)
CN902(N)
CN903(NC)
CN400
CN600
CN4 CN9
CN10
CN8 CN11 CN3
CN500
C603
CN502
CN904
CN700
19 11
3
3
16
15
115
1
112
112
9
Speaker
+-
RED BLK
L
N
E
Main Board
Power SW
Inlet
Amp Board Fuse BoardTransformer
CN901(L)
CN902(N)
CN903(NC)
CN600
CN4 CN9
CN10
CN8 CN11 CN3 C603
CN904
CN700
112
112
2 3
1
67 8
9
4 5

15
Oct. 2019 KTN-50_2
No. Part Code Part Name Description Q’ty
1 5100067824 WIRING W4 (1007/2547#28) 1
2 5100068454 WIRING W1 (1015#22-RED) 1
3 5100068455 WIRING W2 (1015#22-BLK) 1
4 5100067825 WIRING 1007#28 15X115-PHR-SAN-F 1
5 5100067822 WIRING W3 (2547#28) 1
6 5100068458 WIRING W10 (1430#24/1185#26) 1
7 5100068456 WIRING W8 (1672#22-BLK/WHT) 1
8 5100068457 WIRING W9 (1672#22-BLK) 1
9 5100068453 WIRING W17A (1015#18-GRN&YEL) 1

16
Oct. 2019 KTN-50_2
Block Diagram
fig.block-50.eps@L

17
Oct. 2019 KTN-50_2
fig.block-50.eps@R

18
Oct. 2019 KTN-50_2
Parts List
fig.-part-e.eps
Note: The parts marked # are new. (initial parts) The description “Q’ty” means a necessary number of the parts per one product.
Due to one or more of the following reasons, parts with parts code ******** cannot be supplied as service parts.
• Supply is prohibited due to copyright restrictions.
• It is carried in electronic data on the Roland website.
• The part is made to order (at current market price).
• It is a package or an accessory irrelevant to the function
maintenance of the main body.
• Reissuance is restricted.
• It is supplied as an assembled part (under a different part code).
• It can be replaced with an article on the market. (battery or etc.)
• A number of circuit boards are grouped together and supplied
as a single circuit board (under a different part code).
CASING
# 5100067716 CABINET ASSY 1
CHASSIS
# 5100067407 CHASSIS 1
# 5100068387 CHASSIS COVER BOARD 1
5100051955 POWER IC HOLDER 1
KNOB, BUTTON
5100049813 INDEX KNOB 1
# 5100067443 O-KNOB 2
# 5100067440 R-KNOB 2
5100052214 R-KNOB INDEX 8
5100052217 C-KEYTOP 7
5100052218 S-KEYTOP 3
SWITCH
02897801 SEESAW SWITCH SDDJE13200 94V-0 1
01780101 TACT SWITCH SKQKABD010 10
JACK, EXT TERMINAL
# 5100067366 3.5MM JACK YKB21-5457N 1
5100024419 6.5MM JACK PJ-644C-04-EP(610-11020-01-00) 2
5100031944 6.5MM JACK PJ-644C-EP 2
5100009531 USB CONNECTOR B TYPE FEMALE YKF45-0044N 1
SPEAKER, BUZZER
# 5100068138 SPEAKER W1204-067B 1
PWB ASSY
# 5100067610 MAIN BOARD ASSY 1
# 5100067612 PANEL SHEET ASSY 1
* This unit includes the following parts.
******** PANEL BOARD 1
******** AMP BOARD 1
******** INPUT BOARD 1
******** FUSE BOARD 1
DIODE
05011067 LED L-3WEGW (153-L-3WEGW) 6
5100003359 LED(RED) L-34ID (153-L-34IDSLLF) 4
POTENTIOMETER
5100052460 ROTARY POTENTIOMETER RD901F-40-15F-B10K-05D60A 1
5100052466 ROTARY POTENTIOMETER RD901F-40-125F-B10K-04D60A 1
# 5100067365 ROTARY POTENTIOMETER RD912DF-40E1-15F-0B10K-60D0C5 2
# 5100067364 ROTARY POTENTIOMETER RV09BDF-40E1-15F-0B10K-003 6
# 5100067363 ROTARY POTENTIOMETER RV09BDF-40E1-15F-2B20K-003 1
FUSE, FUSE HOLDER
03670534 FUSE 5ST 1.25 1.25A/250V for low voltage 1
03674001 FUSE 5ST 630MA/250V for high voltage 1
5100000592 FUSE HOLDER FC-201(613-11617-01-00) 2

19
Oct. 2019 KTN-50_2
WIRING, CABLE
# 5100067825 WIRING 1007#28 15X115-PHR-SAN-F 1
# 5100068454 WIRING W1 (1015#22-RED) 1
# 5100068455 WIRING W2 (1015#22-BLK) 1
# 5100067822 WIRING W3 (2547#28) 1
# 5100067824 WIRING W4 (1007/2547#28) 1
# 5100068456 WIRING W8 (1672#22-BLK/WHT) 1
# 5100068457 WIRING W9 (1672#22-BLK) 1
# 5100068458 WIRING W10 (1430#24/1185#26) 1
# 5100068453 WIRING W17A (1015#18-GRN&YEL) 1
TRANSFORMER
5100051957 POWER TRANSFORMER 100/117V for low voltage 1
5100051960 POWER TRANSFORMER 225/240V for high voltage 1
AC INLET, OUTLET
5100051443 AC INLET M1909-C 1
SCREWS
40017934 SCREW M3X6 PAN MACHINE W/SW+PW(L) FE ZC 8
40012945 SCREW M3X6 PAN MACHINE W/SW+PW BZC 13
40011423 SCREW M3X6 PAN SEMS FECM 3
40564556 SCREW M3X15 PAN MACHINE W/SW FW ZC 9
40013001 SCREW M4X8 PAN MACHINE W/SW+PW BZC 4
5100048333 SCREW M4X15 OVAL MACHINE NI 4
5100047173 SCREW M4X25 OVAL MACHINE NI 2
40010390 SCREW M5X25 BINDING MACHINE FE BZC 4
40011156 SCREW 3X8 FLAT TAPTITE B BZC 2
40011323 SCREW 3X10 BINDING TAPTITE P BZC 3
5100053052 SCREW 3X14 TRUSS TAPPING A BZC 10
5100043887 SCREW 3.5X16 TRUSS TAPPING A NI 16
40010678 SCREW 4X20 TRUSS TAPPING A FE BZC 4
40010689 SCREW 4X25 TRUSS TAPPING A FE BZC 4
5100033930 SCREW 4X25 TRUSS TAPPING A NI 4
22150501 STANDOFF M3-L5.5-H10 (BS) 6
22150517 STANDOFF M3 L8 2
40011789 NUT M3 HEX ZC 2
5100053056 NUT M4 W/SW BZC 2
5100050484 HEX NUT M4 W/SPW ZC 1
40457245 PLAIN WASHER 3X12X1 ZC 3
5100053055 PLAIN WASHER 4.2X14X1.0 BZC 2
5100053053 PLAIN WASHER 4.2X14X1.0 NI 4
40011889 EXTERNAL TOOTH WASHER M4 FECM 1
5100041078 ROSETTE WASHER M4 NI (MC-15042-20303-000) 2
MISCELLANEOUS
5100052237 BOSS BADGE 1
# 5100067502 KATANA2 BADGE 1
5100049817 HANDLE 1
5100052238 CORNER PROTECTOR 8
5100052235 TRIM SASH 1
5100060776 FOOT F1692 4
5100046595 POWER SW ESCUTCHEON 1
5100052223 HEATSINK 1
# 5100068863 FERRITE-CORE ESD-R-14E 1
5100046593 JACK SPACER 4
5100004371 LED SPACER LK-36-2 6
5100044430 LED SPACER LEDH-1.5 4
5100052288 POWER IC SHEET 1
5100052247 TRANS SHEET 1
12199584 GROUNDING TERMINAL M1698 8
5100005338 TERMINAL SLEEVE TP-008 UL-G 2
# 5100068019 TOP CUSHION L 1
5100052229 TOP CUSHION S 3
5100046598 POWER SW CUSHION 2
40016523 INSULOK TIE 100M/M T-18R (1000 PCS ORDERING PER) 12
# 5100068140 LABEL SPEAKER MAGNET 1
40013812 CAUTION SEAL IEC #142 1
5100049090 CU-CR-F 16X9X0.5 2
# 5100067958 EVA PACKING 170X10X0.5 1
5100053271 EVA PACKING 240X15X0.5 W/ADH 1
40122612 ACETATE TAPE NITTO #5 BLACK W10MM 30M -
40122534 DOUBLE-FACED TAPE #500 W3MM 20M 136P -
40122445 ADHESIVE CEMEDINE SUPER-X NO.8008 170G/135ML -

20
Oct. 2019 KTN-50_2
ACCESSORIES (Standard)
03340956 AC CORD SET PSE (W/ADAPTOR) 100V YA-101/YP-3NB/YC-13 (19) for 100V 1
00894378 AC CORD SET 120V SP301+IS14 SJT18/3 (22) for 117VU, 117VU/CS 1
5100029165 AC CORD 115TW 2.5M SP301+IS14 VCTF (25) for 117VTW 1
5100012292 AC CORD SET 117VBL 2.5M 3P DAIKEI 117VBL (26) for 117VBL 1
00894389 AC CORD SET 230V SP22+IS14 H05VV-F3G1.0 (32) for 230VEU 1
00907001 AC CORD SET 240VE SP-62+IS-14 (49) for 230VE 1
5100013842 AC CORD SET 240VA 2.5M SAA HIRAKAWA (59) for 240VA 1
03450323 AC CORD SET 220V YP-36 YC-13D (65) for 220VCN 1
5100013648 AC CORD SET 220VK 10A 3P-3P 2.5M (66) for 220VK 1
# 5100068139 OWNER’S MANUAL MULTILANGUAGE 1
# 5100068163 OWNER’S MANUAL CHINESE 1