Roline 14.01.3468 User manual

1
Extender over Twisted Pair,
Cat.5/6, chainable, 100 m
14.01.3468 (Extender and Receiver)
14.01.3469 (Receiver)
User Manual
Version 1.0

2
1. Introduction
Thanks for purchasing the HDMI Chainable Extender over CAT.5e/6. We recommend that you read
this manual thoroughly and retain for future reference.
1.1. Features
The HDMI Chainable Extender over CAT.5e/6 allows you to extend video and audio up to 100 meters
distance between a source or computer and monitor or projector. With the built-in video and audio
signals enhancement, you can gain the best video resolution quality and audio stereo sound, and no
additional software is needed. Furthermore, the installation and operation is easy.
 Expandable Receiver, each Receiver Unit with cascade function enables
to link the other two (2) Receiver Units consecutively extending another
100m distance
 Uses easy to install, inexpensive CAT. 5e/6 cables.
 Each pair (TX & RX) extends the signals up to 100m
 Supports video high resolution up to 1920x1080@60Hz, Full HD 1080p.
 HDTV compatible (720p, 1080i, 1080p).
 Supports Stereo 2.0
 Cascaded-chainable receiver up to 10 layers.
 Supports RS-232 (Serial).
 IR (Infrared remote) enabled
 Supports local HDMI monitoring port
 Each receiver (remote) links cascade-chainable 2 receivers.
 Rack mountable
1.2. Package Contents
1. HDMI Extender Transmitter x1
2. HDMI Extender Receiver x1
3. Power Adaptor DC 5V x2 (set units) or x1 (single unit)
4. User Manual x1

3
2. Specifications
2.1. General
Transmitter Receiver
Console
Connectors
HDMI Output HDMI (Female) HDMI (Female)
RS‐232 Control
Port Phone Jack Phone Jack
PC Connectors HDMI Input HDMI (Male) N/A
Extension Port RJ‐45 Full HD Video / Audio Extension
RJ‐45 1 (Line Out) 3 (Line In or Line Out)
Cascaded‐Chainable N/A Yes, up to 10
Audio Supports Stereo 2.0
IR Unidirectional (RX to TX)
Local
Power Red
LED
Indicators
Link Red Green
Remote
Power Red
Link Red Green
DDC Supported Yes
Extension Cable Type & Length CAT.5e / CAT.6 max. Length: 100m
Max. Video Resolution HDMI: 1920 x 1080@60Hz, Full HD 1080p
VGA: 1600 x 1200@60Hz.
Wide Screen Supported Yes
OS Compatibility OS Independent
Power Supply External DC 5V / 2A Power Adapter
Dimension ( L x W x H ) 115 x 91 x 28 mm
Weight 340g 380g
Housing material Metal
Power Consumption Transmitter: 5W, Receiver: 4.5W

4
3. Details and connection diagram
3.1. Detailed Picture

5
3.2. Application Diagram
3.3. Transmitter Installation
 Conenct a CAT. 5e/6 Cable with the Transmitter. The cable connector has to be connected to the
Transmitter LINE port (RJ45).
 Connect the IR Blaster Emitter cable or RS-232 to 3.5mm adapter to the Transmitter Unit IR Port or
RS-232 port if necessary.
 Connect the Transmitter with a HDMI cable to a HDMI connector of the Player, PC, PS3…etc.
 Connect the Transmitter with a HDMI cable to a HDMI connector of Display Monitor if necessary.
 Plug in a DC 5V/2A power adapter
IR Transmitter/Emitter
UTP cable connected
Power Adapter DC5V/2A
Monitor HDMI port connected
PC HDMI port connected
RS-232 to 3.5mm

6
3.4. Receiver Installation
 Connect a CAT. 5e/6 cable with the Receiver. The cable connector has to be connected to the
Receiver LINE1 or LINE2 or LINE3 port (RJ45)
 Connect the IR Receiver cable or RS-232 to 3.5mm adapter to the Receiver Unit IR Port or RS-
232 port if necessary.
 Connect a Receiver with a HDMI cable to a HDMI connector of Display Monitor.
 Plug in a DC 5V/2A power adapter.
3.5. Cascade Chain Connection
 Connect a CAT. 5e/6 cable with the Receiver to link the other two (2) Receiver Units
consecutively to extend another 100m distance. The cable connector has to be connected to the
Receiver LINE1 or LINE2 or LINE3 port (RJ45), as long as the LINE port is not occupied.
 Connect the IR Receiver cable or RS-232 to 3.5mm adapter to the Receiver Unit IR Port or RS-
232 port if necessary.
 Connect a Receiver with a HDMI cable to a HDMI connector of a Display Monitor.
 Plug in a DC 5V/2A power adapter.
Power Adapter DC5V/2A
RS-232 to 3.5mm
IR Receiver
Monitor HDMI port connected
LINE port (RJ45)
RS-232 to 3.5mm
IR Receiver
Monitor HDMI port connected
Power Adapter DC5V/2A
LINE port (RJ45)

7
Each Receiver has three (3) LINE ports. One is used for the source input, and the other two are used for
expanding the source to other receivers. You can choose any LINE port as source input at random, and use
the other two LINE ports for expanding the source to the next tier receiver, as long as the LINE port is not
occupied.
3.6. Network Switch Extending
The maximum distance between each tier could be up to 100 meters long, while this could be extended
through a Network Switch. You can add one Network Switch to extend another 100 meters.
The more Network Switches, the longer is the distance extended. The number of Network Switches is
as many as you want.
3.7. Connection Diagram
(1) Single Source Extension

8
(2) Single Source Extension and Receivers Cascade Chaining
(3) Single Source with Multiple Receivers Cascaded
3.8. IR Bypass function connection
 Connect the IR Transmitter (or Emitter) cable to the IR Connector on the HDMI Transmitter Unit
 (TX)
 Connect the IR Receiver cable to the IR Connector on the HDMI Receiver Unit
(RX)
 Place the IR Eye of the IR Receiver cable near the Remote Controller

9
 Place the IR Blaster of the IR Transmitter cable near the device that intend to be controlled by the
Remoter controller
3.9. RS-232 Bypass function connection
 Connect the device, such as a PC, projector…etc, to the RS-232 port of the HDMI Transmitter
Unit or HDMI Receiver Unit via a RS-232 to 3.5mm adatper
 Connect the controlling device to the RS-232 port of the HDMI Receiver Unit or HDMI Receiver
Unit via a RS-232 to 3.5mm adapter
 Operate the control system
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit or any other
commercial damage, including but not limited to special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying,
recording or information recording and retrieval systems without the express written permission of the manufacturer.
All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders.