Roline 21.13.1181 User manual

16-Port (8 Pair) 10/100M PoE
Mid-Span Power Supply
Quick Installation Guide
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates and
radiates radio frequency energy and, if not
installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
This PoE Mid-span is 8-pair port power supply
consisting of 8 Ethernet data input ports, and
8 Ethernet data output ports with 48V power
equipped, which is fully IEEE 802.3at
compliant. Any Ethernet “Data” cable can
directly connect to the input port and then
come out “Data + Power” from output port. It
is smart plug and play and very easy to install
in any existing networking system, to bring in
PoE features without any new reconfiguration.
The rack-mount size was specifically
designed for medium to large workgroups.
The Switch can be installed where space is
limited; moreover it provides smooth network
migration and easy upgrade to network
capacity. The 19” size can be rack-mount on
19” cabinet.
Package Contents
Before you start to install this switch, please
verify your package that contains the following
items:
 One PoE Mid-Span Power Supply
 Rack-mount Kit for Rack Installation
 One Power Cord
 One Quick Installation Guide
Note: If any of these items is found missing or
damaged, please contact your local supplier
for replacement.
Key Features
 8 “Data” input ports compliant with IEEE
802.3 10BaseT and IEEE 802.3u
100BaseTX
 8 “Data + Power” PSE/PoE output ports
compliant with IEEE 802.3 10BaseT, IEEE
802.3u 100BaseTX and IEEE 802.3at PoE
 Supporting the power Max. 30 W for each
PSE/PoE port
 19” rack-mount size
 Each output port has output current limited,
short-circuit protection, complete Power
Device (PD) detection and classification
 Smart plug & play
Front Panel (LEDs)
LED Indicators of 8 Pair Port PoE
Mid-Span Power Supply
LED Status Description
Power On Power is on.
Off Power is off.
PD Link On Port is connected to a
Power Device port and
supplies 48
Off No Power Device is
connected
Connections
Power Device/Existing Switch to this
8 Pair Port Mid-Span Power Supply
Use Cat. 5 twisted-pair cable from the
existing switch to the “Data” input port of this
Mid-span Power Supply, and then connect
the “Data + Power” output port to the Power
Device, such as Wireless AP, another
switches with PD function…etc.

Rear Panel (Power)
AC input (100~260V/AC, 50~60Hz)
Technical Specifications
Standards
IEEE 802.3at
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
Features
Number of Ports:
8 10/100BaseT(X) Data-In
Ports
8 10/100BaseT(X) Data and
Power
-
Out Ports
LED
Indicators
Per Port: PoE ACT/Status
Per Unit: Power
Power Input
100
~2
4
0V/AC, 50~60Hz
Power Output
48V/DC Per Port Output –
30 W Max Per Port
8 Ports at Full 15.4 W
Output S
upported
Power
Consumption
130 Watts (Max)
Dimensions 440 × 220 × 44 mm
(L x W x H)
Weight
3.0
kg
Operating
Temperature
0 to 40℃
Storage
Temperature
-20 to 85℃
Humidity 10 to 90% RH
(non
-
condensing)
Certifications FCC Class A, CE