Rompa 12507 User manual

1. Product Name
High Platform with Tunnel
2. Product Code
12507
3. Colour
As shown above. Customer can choose from a range of colours, please contact
ROMPA® for colour choices
4. Brief Description
Combine with the high steps and high wedge. Inner wooden frame for strength.
5. Contents
1 x High Platform with Tunnel
1 x mat for inside the Tunnel
6. Snoezelen® Stimulations
Sight
7. Best Use
Place High Platform with Tunnel in an area where there is enough room to use the
product safely.

8. Compatible ROMPA® Products
High Wedge 12618
High Steps 12619
ROMPA® offers an extensive range of soft play items and wall/floor cushioning. Visit
www.rompa.com for more information.
9. Starting Up
Choose a suitable location indoors.
10. Detailed Description
Combine with the High Steps and High Wedge. Inner wooden frame for strength.
Includes a cushioned floor.
11. Safety
Please read all the following safety information before each use
ALWAYS SUPERVISE THE USE OF THIS PRODUCT
Use indoors, in dry environments.
Remove all packaging and either store this in a safe place out of reach of clients or
dispose of this responsibly. Plastic bags and wrapping can be hazardous to children
and vulnerable people.
The High Platform with Tunnel contains a foam filling. Do not attempt to access the
interior part of this product. Never allow children or vulnerable people to access the
interior part of this product.
Avoid sharp or pointed objects which could puncture the product. Take care with
zips on clothing etc. Remove shoes.
Should any seams become damaged, contact ROMPA®immediately to arrange
repair or replacement. Should the product require re-filling, contact ROMPA®
immediately to discuss this.
Do not place near sources of heat or fire that may damage the surface (radiators,
fires, underfloor heating, hot central heating pipes etc.)
Some of our products contain zips for manufacturing purposes only. Do not attempt to
open these or to access the interior part of these products. Never allow children or
vulnerable people to access the interior part of this product.

12. Technical Specification
Size: 72.5 x 72.5 x 109cmH
13. Installation
Place the High Platform with Tunnel where desired, ensuring that a risk assessment of the
area has been made and the surrounding area is clear from obstruction and access routes
are clear to enable safe use of the product.
14. Care and Maintenance
FABRIC MAINTENANCE
If you look after your High Platform with Tunnel it should give you many years of service.
But please observe the following:-
Always supervise the use of resources.
Organise a regular cleaning schedule.
Vinyl will crack, tear and rub off if subjected to sharp objects or continual rubbing by hard
objects. Remove shoes, and avoid buckles, zips or sharp/hard/pointed objects coming
into contact with the surface.
Check seams regularly to ensure that these are not worn or split and the interior filling
cannot be accessed.
Wipe off accidental marks/liquids at the time they occur or are noticed.
From time to time, if possible, lift floor cushion or move furniture to clean all surfaces
and the floor underneath.
Furniture and cushioning is intended to provide comfort and relaxation. Avoid eating and
drinking whilst using these products.
If the material for your furniture can be steam cleaned, please exercise great caution for
the simple reason that when creating furniture, seams and stitching are necessary which
create tiny holes where it is possible for liquid to get through into the inner foam. Should
a lot of steam/water be accidentally used, there is potential for the inner foam to get
saturated and be detrimental to your furniture.
Do not place near sources of heat or fire that may damage the surface (radiators, fires,
underfloor heating, hot central heating pipes etc.)
Direct contact with bright sunlight may affect material over time.
Do not saturate the material with lots of water.
Some of our products contain zips for manufacturing purposes only. Do not attempt to open
these or to access the interior part of these products. Never allow children or vulnerable
people to access the interior part of this product.

PVC (Vinyl)
Use a soft brush remove all loose dust/dirt
Clean with a mild detergent (such as Lux soap flakes in luke-warm solution) applied to a
sponge or damp cloth.
This may be sanitised using a weak solution of Milton fluid.
Do not use excessive amounts of water and always ensure the PVC is dry after cleaning.
Do not use an abrasive cleaning pad.
Do not use boiling/very hot water, washing up liquid / aggressive detergent or solvent
based cleaner as this will cause the coating to discolour and go hard.
Steam cleaning is not advised.
15. Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received –please contact us at
[email protected]
HIGH PLATFORM WITH TUNNEL 12507, January 2017,
Copyright ROMPA® Ltd