Rompa 21567 User manual

1. Product Name
Vertical Bouncer Kit
2. Product Code
21567
3. Colour
As shown
4. Brief Description
Use with any swing for added bounce! Specifically designed to enable controlled bouncing
and vestibular stimulation with any therapy equipment you attach to it.
5. Contents
1 x Vertical Bouncer Kit:
2 x Single Vertical Bouncer units
2 x Double Vertical Bouncer units
2 x locking Safety Snaps

6. Snoezelen® Stimulations
Vestibular
7. Best Use
Use from a safe and appropriate suspension system.
8. Compatible ROMPA® Products
13672 –Hanging Bracket
21559 –Safety Rotational Device
21570 –Safety Snap
See www.rompa.com for compatible swings, helmets, mats and a large range of other
Sensory Integration products
9. Starting Up
There are no short-cuts when setting up and using Sensory Integration equipment.
Please keep these instructions in a safe place and refer to them before each use.
10. Detailed Description
Use with any swing for added bounce!
Specifically designed to enable controlled bouncing and vestibular stimulation with any
therapy equipment you attach to it. Includes 2 Single Vertical Bouncers, two 2 Double
Vertical Bouncers, and 2 Safety Snaps. Reinforced elastic loops are sewn onto the ends of
the Single and Double Vertical Bouncers. Weight capacity: 129kg (285 lbs)

11. Safety
Always supervise the use of this product
Always use a Rotational Device to help prevent wear of your swing and the
suspension points.
Do not exceed the weight capacity: 129kg (285 lb).
Sensory Integration products are intended to be used by professionals.
Use safety mats on the floor, as well as on the walls as necessary.
Use a safety helmet, and any other appropriate safety measures for your client’s needs.
Use only steel safety snaps as aluminium safety snaps wear more quickly.
For indoor use only.
Check all hardware and stitching before each use to check these are intact.
This product is not a toy. Any activity involving motion, height, or rotation may cause serious
injury. This product is intended for use under the supervision of trained professionals.
12. Technical Specification
Weight capacity: 129kg (285 lb)
Reinforced elastic loops are sewn onto the ends of the Single and Double Vertical Bouncers
13. Installation
Allow plenty of unobstructed space around your swing. Suspended equipment needs a
minimum ceiling height of 2.5m (8 feet). Suspended equipment should be positioned a clear
distance of 1.8m (6 feet) from walls and obstacles.
Safety Snaps
Our Safety Snaps can be locked.
1. Turn the locking nut to open the snap (to slide this nut
down to allow the snap to be opened). Turn the nut in
the opposite direction to slide it up and over the opening
to lock it.

Vertical Bouncer Kit
1. Open one Safety Snap on the Vertical Bouncer Kit and unhook it to flatten out the
bouncer.
2. Select the desired single or double bouncer attachments and disconnect the
unwanted accessories from the Safety Snap.
3. Attach one of the Vertical Bouncer Kit Safety Snaps to the reinforced loop on the top
of the swing.

4. Connect the Safety Snap on the other end of the Vertical Bouncer Kit to your secured
end point of suspension.
14. Care and Maintenance
1. All the parts of your suspended products should be checked on a regular basis (at least
monthly, and more if the swing is used often). Use a maintenance sheet (such as the
example one provided) to record these checks.
2. Check all the parts for signs of wear and tear before each use and replace these as
appropriate. For example, check the fabric parts for loose stitching.
3. Use and store this product indoors, in a safe place.
4. Dust or wipe the components clean with a damp cloth. Do not immerse in water.
Allow to dry before use.
15. Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received –please contact us at
[email protected]
VERTICAL BOUNCER KIT 21567, March 2015
Copyright ROMPA® Ltd

SENSORY INTEGRATION MAINTENANCE CHECK LIST
PRODUCT: ……………………………………………….
TO CHECK
Date / S (Satisfactory) or R (Repair/replace)