Rompa 21557 User manual

1. Product Name
Tube Swing
2. Product Code
21557 –Tube Swing Set
21562 –Tube Swing Harness
14521 –Heavy Duty Tube
3. Colour
As shown
4. Brief Description
Use the tube and harness together as a swing.
5. Contents
21557 = tube and harness
21562 = harness only
14521 = tube only
6. Snoezelen® Stimulations
Vestibular

7. Best Use
Use from a safe and appropriate suspension system.
8. Compatible ROMPA® Products
13672 –Hanging Bracket
21559 –Safety Rotational Device
21570 –Safety Snap
See www.rompa.com for helmets, mats and a large range of Sensory Integration products
9. Starting Up
There are no short-cuts when setting up and using Sensory Integration equipment.
Please keep these instructions in a safe place and refer to them before each use.
10. Detailed Description
Tube Swing Set
Includes a Tube Swing Harness and a Heavy Duty Tube.
Tube Swing Harness
Accommodates most large inner tubes and protects clients from the valve.
Heavy Duty Tube
This product is recommended for use as shown and should be purchased with the harness.
Supplied deflated. Inflator not included. Working load: 125kg (275 lbs). Size: 95cm diameter
11. Safety
Always supervise the use of this product
Always use the Rotational Device to help prevent wear of your swing and the
suspension points.
Do not exceed the maximum load of 80kg.
Sensory Integration products are intended to be used by professionals.
Use safety mats on the floor, as well as on the walls as necessary.
Use a safety helmet, and any other appropriate safety measures for your client’s needs.
Use only steel safety snaps as aluminium safety snaps wear more quickly.
For indoor use only.
Check all hardware and stitching before each use to check these are intact.
This product is not a toy. Any activity involving motion, height, or rotation may cause serious
injury. This product is intended for use under the supervision of trained professionals.

12. Technical Specification
Maximum load: 80kg
Tube size: outside diameter 95cm
Tube: contains latex and phthalates
13. Installation
Allow plenty of unobstructed space around your swing. Suspended equipment needs a
minimum ceiling height of 2.5m (8 feet). Suspended equipment should be positioned a clear
distance of 1.8m (6 feet) from walls and obstacles.
1. Inflate the tube to the desired size.
2. Place the harness over the tube so that the valve stem is covered.
3. Place the ends of the harness through the Safety Snap of your Suspension System.
14. Care and Maintenance
1. All the parts of your suspended products should be checked on a regular basis (at least
monthly, and more if the swing is used often). Use a maintenance sheet (such as the
example one provided) to record these checks.
2. Check all the parts for signs of wear and tear before each use and replace these as
appropriate. For example, check the harness for loose stitching.
3. Use and store this product indoors, in a safe place.
4. Dust or wipe the components clean with a damp cloth. Do not immerse in water.
Allow to dry before use.
15. Troubleshooting
Not applicable
Further copies of these instructions can be downloaded at www.rompa.com
We hope you find our instructions invaluable. If you have any suggestions for improving
them further your comments will be greatly received –please contact us at
[email protected]
TUBE SWING 21557, 21562, 14521, March 2015
Copyright ROMPA® Ltd

SENSORY INTEGRATION MAINTENANCE CHECK LIST
PRODUCT: ……………………………………………….
TO CHECK
Date / S (Satisfactory) or R (Repair/replace)