Roper REC3422A User manual

UseAndCare
A Note To You 2
Understandng
safety 3
Knowin Your
Dryer/s eatures
B 5
Operating Your Dryer 6
pi$gg For Your 9
Laundry Tips 12
HYqu Need
2g: 18
Warranty 20
l-800-&ROPER
GalI us with qmstions of comment.
4-93
COMPACT ELECTRIC AND GAS DRYERS
MODELS REC3422A RGC3422A REP3422A

A Note To You
Thank you for buying a Roper appliance.
You have purchased a quality, world-class home appliance. Years of engineering experience have
gone into its manufacturing. Use this Use and Care Guide to safely and efficiently operate and
maintain your appliance. Complete and mail the Ownership Registration Card provided with your
appliance. This will help us notify you about any new information on your appliance.
Your safety is important to us.
This guide contains safety symbols and statements. Please pay special attention to these symbols
and follow any instructions given. Here is a brief explanation of the use of each symbol.
This symbol will help alert you to such dangers
as personal injury, burns, fire and electrical
shock.
This symbol will help you avoid actions which
could cause product damage (scratches,
dents, etc.) and damage to your personal
property.
Our toll-free number, l-80044-ROPER (l-800447-6737),
is available 24 hours a day.
If you have a question concerning your appliance’s operation, or if you need service, first see ‘If
You Need Assistance or Service” on pages 18 and 19. If you need further help, call us. When
calling, you will need to know your appliance’s complete model number and serial number. You
can find this information on the model and serial number label (see diagram on page 5). For your
convenience, we have included a handy place below for you to record these numbers, the pur-
chase date from the sales slip and your dealer’s name and telephone number. Keep this book and
the sales slip together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone
2

Understanding Safety
For your safety, the information in this manual must
be followed to minimize the risk of fire or explosion
or to prevent property damage, personal injury or
-Do not store or use gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.
-WHAT TO DO IF YOU SMELL GAS:
l Do not try to light any appliance.
l Do not touch any electrical switch; do not use any phone in your
building.
l Clear the room, building or area of all occupants.
l Immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions.
l If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer,
service agency or the gas supplier.

IMPORTANT SAFEl-Y INSTRUCTIONS
To reduce the risk of fire, electrical shock, or injury to persons when
using your dryer, follow basic precautions, including the following:
l Read all instructions before using your dryer.
l Do not machine wash or machine dry items
cleaned, washed, soaked in, or spotted with
wax, paint, gasoline, oil, dry cleaning
solvents, and other flammable fluids. The
fumes can create a fire hazard or explosion.
Always hand wash and line dry items
containing these materials.
l Do not allow children to operate, play with or
crawl inside your dryer. Supervise children
when your dryer is used near children.
l Do not reach into a dryer if the drum
is moving.
l When removing from service or discarding
a dryer, always remove the door to prevent
accidental entrapment.
l Do not dry rubber, rubber-like, and heat
sensitive materials with heat.
l Install and/or store dryer where it will not
be exposed to the weather.
l Do not tamper with the controls.
l You are responsible for making sure that
your dryer is installed, repaired and has
parts replaced by a qualified person.
l Use only fabric softeners specifically
labeled as not being harmful to the dryer.
l Do not allow lint to build-up inside the dryer
or exhaust system. Cleaning should be
done periodically by a qualified person.
l Clean lint screen before or after each load.
l Do not let dust, lint, paper, rags, chemicals,
etc. pile up around or under the dryer.
l Dryer must be electrically grounded. See
the Installation Instructions.
Understanding your responsibilities
l Never operate the dryer if:
-it is not working right (i.e. noisy,
too hot).
-it is damaged.
-parts are missing.
-all panels are not in place.
-the lint screen is loose, damaged or
missing.
l Unplug the power supply cord or turn off
electrical power before attempting to
service your dryer. Shut off gas valve if
you have a gas dryer.
l Do not wash or dry items that are soiled
with vegetable or cooking oil. These items
may contain some oil after laundering.
Due to the remaining oil, the fabric may
smoke or catch fire by itself.
l Store flammable solvents or fluids away
from your dryer.
l Dry cleaning solvents or fluids should
never be put directly into your dryer.
l Be sure that your dryer:
-is properly installed and leveled on a
floor that can support the weight in a
well-ventilated room.’
-is connected to the proper outlet and
electrical supply.*
-is properly connected to fuel and
exhaust systems (gas dryers must be
vented outdoors).*
-is not installed against draperies or
curtains, or on carpet.’
-is located in an area where the tempera-
ture is above 45°F (7°C).
-is properly maintained.
-is used only for jobs normally expected
of home clothes dryers.
-is not used by anyone unable to operate
it properly.
‘See the Installation Instructions for com-
plete information.
- SAVE THESE INSTRUCTIONS -

Knowing Your Dryer’s Features
The parts and features of your dryer are illustrated below. Become familiar with all parts and
features before using your dryer.
NOTE: The drawings in this book may vary from your dryer model. They are designed to show the
different features of all models covered by this book. Your model may not include all features.
Start button
Lint screen
I/I\
Modal Md l srlsl
number Mel
Access door
(gas models only) End of cycle signal
(not shown)
Optional mounting kits
You can mount your compact dryer above your
compact washer using one of the following,
Fire and Explosion hazard
If mounting a gas dryer, use only Dryer
Stand Kit, Part No. 695570. Using any
other kit could result in a gas leak.
Failure follow the above instructions could
cause fire or explosion.
l Dryer Stand Kit for permanent installation,
secured to the wall.
Part No. 695570 (electric or gas)
l Stack Kit for free-standing installation.
Part No. 346721 (electric)
l Stack Kit to mount dryer permanentiy onto
the washer.
Almond
Part No. 3390196 (electric)
White
Part No. 3390175 (electric)
l Dryer Wall-Mounting Kit for securing the
dryer to the wall with a steel bracket.
Part No. 345994 (electric)
NOTE: The wall must be strong enough to
support the dryer’s weight. (Do not use in
mobile homes.)
Optional deflector kit
l Exhaust Deflector Kit to move dryer exhaust
up, down, or to the side.
Part No. 346001 (electric)
5

Operating Your Dryer
In This Section Paw Paw
Before starting your dryw .................................6 Selecfing a cycle ............................................*..
7
Starting or stopping your dryer .......................6
Operating your dryer properly assures the best drying results. This section gives you important
information to help you to select a cycle, time, and temperature.
Before starting your dryer
Refer to the information below, and ‘Laundry
Tips” on page 12 for control setting, sorting,
and loading information.
NOTE: Remove any hang tags or temporary
labels before using your dryer. Wipe dryer
drum with a damp cloth to remove dust from
storing and shipping.
Starting or stopping your dryer
Starting your dryer
Close the door and select a cycle and tempera-
ture. Push the Start button. See pages 7-8 for
additional setting information. Your dryer
automatically stops when a cycle ends.
Stopping and restarting your
dryer
Open the dryer door or turn the Cycle Control
Knob to OFF. Close the door: make new selec-
tions (if necessary). Push the Start Button.
NOTE: The Cycle Control Knob should point to
an OFF area when the dryer is not in use. If the
dryer is stopped before the cycle is finished, turn
the Cycle Control Knob to an OFF area.
End of cycle signal
The dryer sounds a signal to let you know when
the cycle is finished. The signal is not adjustable
and cannot be turned off.
The signal is helpful when you are drying
permanent press, synthetics, and other items
that should be taken out as soon as the
dryer stops.

Selecting a cycle
Use pages 7 and 8 to find information about
drying cycles that may be on your model.
To Select a cycle:
1. Turn the Cycle Control Knob either way to
a desired time or setting.
2. Stop when the indicator points to the cycle
you want.
3. Push the Start Button.
Changing a selectIon:
1. Turn the Cycle Control Knob to point to a
new setting.
2. Push the Start Button, if necessary.
Using the Air cycle (no heat)
Flro Hazard
Do not dry plastic or rubber items with
heat. Use the Air cycle, or line dry.
Failure to do so could result in fire or
damaged items.
The dryer does not heat when the Cycle
Control Knob is set in the Air cycle. This cycle
can be used to fluff or air dry bedding, plastic
tablecloths, foam pillows, sneakers, etc.
1. Turn the Cycle Control Knob to the number
of minutes you want in the Air cycle. (Cycle
is unheated.) Refer to the chart below for
suggested times.
2. Push the Start Button.
NOTE: Repeat steps above if more time is
needed to dry items.
TYPE OF LOAD
RUBBER, PLASTIC, HEAT-SENSTTIVE FABRICS
Foam Rubber-Pillows, bras, stuffed toys
PlastioShower curtains, tablecloths
Rubber-backed rugs
Olefin, Polypropylene, Sheer nylon
I
AIR CYCLE

Start &ton Cycle corhof knob
Loads tumble without heat during the last few NOTE: To help reduce wrinkling, remove the
minutes of all heated cycles. This makes a load load from the dryer as soon as tumbling stops.
easier to handle and helps keep wrinkles from This is important for permanent press, knits
setting in. and synthetic fabrics. Do not overdry. Over-
Uslng your Regular Heavy cycle drying can cause shrinkage, static cling, and
Use your Regular Heavy cycle to dry heavy and damage ‘Orne fabrics.
mediumweight cotton and linen fabrics.
Uslng your Permanent Press cycle
Use your Permanent Press cycle to dry perma-
nent press and some synthetic fabrics.
TYPE OF LOAD
COlTONS AND LINENS
Extra Heavy-Bedspreads, mattress pads, quilts
Heavyweight-Towels, jeans, corduroys, work
clothes
Mediumweight-Sheets, cotton underwear,
diapers
Lightweight-Satistes, organdies, lingerie
PERMANENT PRESS, SYNTHETICS AND
BLENDS
Heavyweight-Work clothes, jackets, raincoats
Mediumweight-Shirts, play clothes, sheets,
slacks
Lightweight-Lingerie, blouses, dresses
KNlTS
Heavyweightxottons, rayons, blends, T-shirts,
slacks, shirts
MediumweightSynthetics (polyester, acrylic,
etc.), dress slacks, skirts, sweaters
Lightweight-Synthetics (polyester, acrylic, etc.)
and blends, lingerie, blouses, dresses
MODELS
REC3422A
CYCLE RGC3422A REP3422A
Regular/Heavy 45-55 min 90-l 05 min
Regular/Heavy 40-50 min 80-90 min
Regular/Heavy 3040 min 70-80 min
Perm. Press 20-30 min 50-60 min
Perm. Press 3040 min 60-70 min
Perm. Press 20-30 min 50-60 min
Perm . Press 15-25 min 3040 min
Perm. Press 3040 min 60-70 min
Perm. Press 20-30 min 50-60 min
Perm. Press 15-25 min 3040 min
DELICATE FABRICS
Sheer curtains (2 or 3 panels), gauze, lace, etc. Air 20-30 min 20-30 min

Caring For Your Dryer
I
In This Section PWP Page
Maintenance-every load ....................................9 Maintenancbar needed ..................................9
Dryers require regular maintenance. Follow the suggestions below to maintain your dryer properly.
Maintenance-every load
Cleaning the lint screen
The lint screen is located inside the dryer
drum, on the back wall. Clean lt before each
load. A screen blocked by lint can increase
drying time. Product and Fabric Damage Hazard
Do not run the dryer with the lint screen
loose, damaged, blocked or missing.
Doing so can cause overheating and
damage to both the dryer and fabrics.
1.
2.
3.
4.
Open the door and pull the lint screen
straight out.
Squeeze body of lint screen lightly while
pulling the cover off. See illustration.
Roll lint off the screen with your fingers. Do
not rinse or wash the screen to remove lint.
Wet lint is hard to remove.
Replace cover on lint screen body. Push the
lint screen firmly back into place and close
the door.
tint screen cover
Maintenance-as needed
Use the following suggestions about cleaning
and lint removal to maintain your dryer and
keep it operating efficiently.
Cleaning a clogged lint screen
Laundry detergents and fabric softeners can
cause a residue build-up on the lint screen. A
clogged lint screen can extend drying times.
Clean the lint screen every six months or more
frequently if it becomes clogged due to a
residue build-up. Use the following method:
1. Wet both sides of lint screen with hot water.
2. Wet a nylon brush with hot water and liquid
detergent.
3. Scrub lint screen with the brush until all
residue build-up is removed.
4. Rinse with hot water.
5. Thoroughly dry lint screen with a clean
towel and replace in dryer.
9

Cleaning the dryer interior
Electrkal Shock,
Personal InJury and Fire Hazard
l Turn off the electrical power before
cleaning the interior.
l Make sure the dryer is cool.
l Use nonflammable cleaner.
Failure to do so could result in electrical
shock or injury, fire or explosion.
Garments which contain unstable dyes, such
as denim blue jeans or brightly colored cotton
items, may discolor the dryer interior. If you
want to remove stains from dryer drum, use
powdered laundry detergent.
1. Make a paste with detergent and very warm
water.
2. Apply paste to a soft cloth and scrub area
until all excess dye is removed.
3. Wipe thoroughly with a damp cloth.
4. Tumble a load of rags to dry.
Cleaning the dryer exterior
Wipe with a soft, damp cloth.
10

Lint removal
Lint can gather inside the dryer and be a fuel
for fire. It is recommended that lint be removed
every 2 to 3 years, or more often, depending
on dryer usage. Cleaning should be done by a
qualified person. If you have any questions,
please call our toll-free number at
l-800447-6737.
ElectrIcal Shock and
Personal InJury Hazard
l Unplug the power supply cord, or turn
off the electrical power at the main
power supply before removing dryer
panels.
l Make sure the dryer is cool.
l Dryer parts can have sharp edges. Use
care when handling.
Failure to do so could result in electrical
shock or personal injury.
1. Unplug the power supply cord, or turn off
the electrical power at the main power
supply.
2. Remove back panel (electric) or lower front
access panel (gas).
3. Remove lint from shaded area in illustration
with a soft brush or vacuum cleaner. Avoid
damaging wires, thermostats (electric),
funnel (gas) or ignitor (gas).
4. Replace panel; reconnect and level dryer
again, if necessary.
Thermostat8 Heat element
Electric dryer with back panel removed
lgnitor Funnel
Gas dryer with lower front
access panel removed
11

Laundry Tips
I
In This Section
Paw
Paw I
Before you dry .................................................. 12
Drying special-csre items ................................ 13
Using dryer fabric softeners ............................ 15
saving energy ................................................ 15
Vecation CYO.................................................. 15
Voltsge rsquirements .................................... 15
Sotving IaurnMng probfemo ....................... 16
This section reviews proper drying techniques, gives you additional drying information, and
discusses causes or solutions to common drying problems.
Before you dry
Before using your dryer, see pages 3 and 4 for
Important Safety Information.
Drying tips
l Check garments to make sure all spots and
stains were removed during the wash. If
stains were not removed, do not tumble dry.
Heat may permanently set stain. Soiled items
can also leave stains on the dryer drum.
These stains can be picked up by other items
in the load.
l Empty all pockets. Turn pockets of heavy
items inside out for even drying.
l Turn lint takers and dark items inside out to
help prevent lint pickup.
l Remove heat-sensitive trim that can be
damaged by drying.
l Tie strings and sashes so they will not tangle.
l Place small items such as baby socks or
hankies in a mesh bag for easier removal.
l Close zippers, snaps and hooks to avoid
snagging other items. Remove pins, buckles
and other hard objects to avoid scratching the
dryer drum.
l Articles to be ironed should be removed from
the dryer while still damp.
l Items properly sorted for washing are usually
Sorting
properly sorted for drying.
l Separate heavy fabrics (denim, towels) from
light fabrics (synthetics, permanent press).
l Separate lint givers (towels, chenille) from
lint takers (corduroy, synthetics, permanent
press). When possible, turn lint takers
inside out.
l Separate dark from light colors; colorfast
from noncolorfast.
Load sizes
l Load the dryer by the amount of space items
take up, not by their weight.
l Do not overload the dryer. Overcrowding
causes uneven drying and wrinkling, and
can cause items to wear out faster (because
of pilling).
l Mix large items with smaller items.
l You may need to rearrange large items
(sheets, blankets, tablecloths) during a cycle
to reduce balling or rolling up.
l Reduce wrinkling of permanent press and
synthetics by drying smaller loads and
removing items from the dryer as soon as
tumbling stops.
l For better tumbling action when drying only a
few small items, add one or two lint-free
towels. This also prevents small, lightweight
items from blocking airflow.
12

Drying special-care items
Most garments and household textiles have care labels with laundering instructions. Always follow
label directions when they are available. General drying instructions for some special washables
are included in this section.
Air drying Heat sensitive fabrics, plastic, rubber or some stuffed items require drying
without heat. Use an Air setting or line dry. The Air setting is useful for
fluffing bedding and pillows, and dusting draperies and clothing. See
Warning on page 7.
Heat-sensltlve
fabrks
l Olefin, polypropy- Follow care label directions.
lene, sheer nylon
l Cotton and If shoes can be machine laundered:
canvas shoes 1. Place several bath towels in the dryer to act as a buffer, or place
shoes on drying rack if your dryer has one.
2. If rubber or foam rubber materials are part of the shoe, use an Air
setting. For other materials, see page 8 for cycle, time, and tempera-
ture recommendations.
Pillows, stuffed 3. Remove shoes from dryer while still damp and allow to air dry.
toys
l Feather, foam, If manufacturer recommends machine drying, dry one pillow at
polyester a time and:
1. Make sure coverings are securely stitched.
2. Shake and fluff the items by hand several times during the cycle.
3. Make sure pillows are completely dry. Feather pillows take a long time
Plastic, rubber to dry.
items
l Shower curtains, Follow care label directions.
tablecloths, baby
panties
Scatter rugs Follow care label directions.
Blankets and Machine drying knitted woolens is not recommended. Block to shape
woolens when wet and allow to air dry. Line dry blankets in shade on a breezy day
over two lines. Pin edges together and straighten them. When partly dry,
turn the blanket over, repin and restraighten. When dry, brush nap.
l Cotton, rayon, Dry as recommended for permanent press fabrics on page 8.
synthetic blankets If manufacturer recommends machine drying:
l Electric blankets, 1. Place one or two dry towels in the dryer and preheat 3-5 minutes on a
electric sheets, high setting. This will dry blankets faster and help avoid pilling.
woolen blankets, 2. Put blanket in dryer with warm towels. Set control for 20 minutes.
washable woolen
garments 3. Check after 10 minutes. Remove when still damp. Overdrying and long
tumbling can cause shrinking and pilling.
4. Place blanket on flat surface or over two lines to finish drying. Gently
stretch to original size and shape.
5. When completely dry, brush gently to raise nap. Press binding with
cool iron if needed.
continued on next page
13

Curtalns,
slipcovers Remove drapery weights and hooks before laundering.
1. Use lowest temperature or an Air setting.
l Draperies,
slipcovers 2. Leave room in dryer for load to fluff.
3. Remove from dryer while slightly damp. Do not overdry.
For slipcovers, replace while still slightly damp. They will dry to fit tightly.
l Sheers, some Dry only a few minutes.
synthetic curtains
l Bonded or Do not overdry or tumble in high heat. Overdrying loosens the adhesive
laminated fabrics and causes fabrics to separate.
Diapers, baby Wash and dry small items in a mesh bag or pillowcase for convenient
clothes handling.
1. Dry according to fabric and cycle settings listed on page 8.
2. Remove diapers and cotton knit items while still slightly damp. They
will feel softer, shrink less, and be easier to fold.
Elastlt Items Dry at lowest temperature setting. Remove from dryer while still slightly
damp.
FIberglass
materlals
Flame-
retardant
flnlshes
Do not machine wash or dry fiberglass materials. Small particles can stick
to fabrics washed or dried in following loads and cause skin irritation.
Some items have been treated with a flame-retardant finish to improve
their resistance to burning. Such items are clearly labeled. To retain
flame-retardant qualities through continuous use and washing, clean and
dry according to the manufacturer’s instructions.
Napped
Items
l Corduroy,
velveteen
Dry separately or with similar colors to avoid lint transfer. Follow care
label directions.
1. Dry according to fabric and cycle settings shown on page 8.
2. Remove from dryer while there is still a trace of moisture.
3. Smooth, reshape and air dry before putting away.
Qullted, down- Follow care label instructions.
fllled Items 1. Dry one at a time.
2. Remove from dryer and shake or fluff the item during the drying cycle.
3. Smooth and reshape before putting away.
Snowsults,
Jackets
l Nylon,
polyester-base
Check label for fiber content, then see page 8 for cycle and temperature
recommendations.
Follow care label directions.
1. Dry garment for about 10 minutes. Remove and turn inside out. Dry
for 10 more minutes.
2. Remove from dryer immediately and hang on a nonrusting hanger to
finish drying. This will help eliminate wrinkles.
Tlnted, dyed or Dry according to fabric, weight and care label instructions. Wipe the dryer
noncolorfast drum carefully to remove any dye or lint that can be transferred to other
Items loads. See “Cleaning the dryer interior” on page 10.
14

Towels Select cycle according to fabric type. Some towels, particularly those
made of a blend of synthetic fibers and natural fibers (polyester and
cotton blends), may shed more lint than other towels causing your dryer’s
lint screen to get full faster. Be sure to remove lint from the dryer lint
screen before and after drying new towels.
Washable knlts Do not overdry knits. Overdrying can cause shrinking and static cling.
1. Select cycle according to fabric and construction.
2. Turn synthetics and blends inside out when drying to avoid pilling.
3. Remove cotton and rayon knits while still slightly damp. Stretch into
shape and lay flat to finish drying.
Using dryer fabric softeners
Dryer fabric softeners are recommended for
reducing static cling (static can also be re-
duced by not overdrying) and for softening
fabrics. Always follow package instructions
carefully.
l Put fabric softener sheet on top of the load
before startlng the dryer. Do not add a
fabric softener sheet after the cycle has
started. Instant heat can cause the fabric
softener to spot fabrics.
l Clear, grease-like spots can result from the
fabric softener sheet becoming tangled in an
item during tumbling. If fabric softener
causes a stain, wet the stain and rub with
liquid detergent or bar soap, rewash.
l Some fabric softeners can clog the lint
screen and slow drying. Use fabric softeners
labeled as dryer safe.
Saving energy
l Dry only full loads without overdrying.
l Avoid overloading dryer, adding wet items to
a partly dried load, or opening the door
unnecessarily.
l Plan your laundry to dry one load after
another. A warm dryer shortens drying time.
l Shorten drying times by exhausting dryer
properly and cleaning exhaust duct as
needed.
-Keep the lint screen clean.
-Use your dryer in a room where room air
temperature is above 45°F (7°C).
-Sort loads by fabric weight and type.
Vacation care
1. Unplug power supply cord or turn off
electrical power supply.
2. Clean lint screen.
Voltage requirements
9 Model REC3422A operates on 240 or 208
volt household current.
l Models REP3422A and RGC3422A operate
on 120 volt household current.
NOTE: Electric dryers using 208 or 120 volts
require longer drying times than dryers using
240 volts.
q 81111
240 or 208 volt 120 volt power
powu .UPPly SUPPlY
15

Solving laundering problems
Most laundering problems are easily solved. Check the following list for problems you may have
and possible causes. If you need additional help, check the “Assistance or Service” section of
this book.
PROBLEM CHECK IF CAUSES/SOLUTIONS
Greasy Dryer fabric softeners Follow manufacturer’s product directions
spots were used carefully.
Undiluted washer fabric Dilute fabric softener before adding to
softener was used the final rinse.
Enough detergent was used Use enough detergent to hold soil in the
wash water until it drains away. Undrained
soil can stick to outer tub of the washer and
cause greasy spots with next load.
Items were clean before they
were dried Soiled items can stain other items in the
load. They can also leave stains on the
dryer drum that can be picked up by items
in later loads. Dryer heat may permanently
set these stains.
Llnt Lint screen is clogged
Load is properly sorted
Static electricity is
attracting lint
Load is too big or heavy
Clean lint screen. (See page 9.)
Sort lint-givers (bath towels, etc.) from lint-
takers (synthetics, permanent press).
Use fabric softener in the washer’s final
rinse. Use correct dryer settings for fabric.
Overdrying synthetics can cause lint-
attracting static electricity.
Dry smaller loads. When items can’t tumble
freely, air is unable to carry lint to lint
screen.
Paper or tissue was in pocket Empty pockets carefully. A small scrap of
paper can cause a lot of lint.
Enough detergent was used Use enough detergent to hold the lint in the
water until it drains away. Base detergent
amount on water hardness and soil in wash
load.
Pilling is being mistaken for lint Pilling (surface fuzz) is caused by normal
wear and laundering. Pills do not break
away easily from the fabric and can often
collect lint. Synthetic fabrics are more likely
to pill than others, especially at neckbands,
elbows and knees.
16

PROBLEM CHECK IF
Shrlnklng Items are overdried
CAUSES/SOLUTIONS
Remove items while there is still a trace
of moisture. Some items should be
removed while damp, then shaped and
air dried.
Fabric type and quality is
suitable for drying Some knits are stretched during manufac-
turing. Washing and drying returns them
to the original size. This is normal. Check
quality of garment before buying. Follow
fabric care label directions carefully.
Slow drying There is a large amount of
moisture in the load to be
dried
Some items hold more moisture than
others (cottons more than polyester).
They take longer to dry. Full loads take
longer to dry than small loads of the same
fabric.
Cold rinse water is used A load rinsed in cold water will take
slightly longer to dry than a warm one.
Cold rinses, however, help save energy
and reduce wrinkling more than warm
rinses do.
Room air temperature is
below 45°F (7°C) Install dryer in a room where the air temperature is warmer than 45°F (7°C).
Cold air increases drying time and may
cause wrinkles not to be removed.
Dryer is exhausted according
to Installation Instructions
Lint screen is clogged
Install and exhaust your dryer according
to the Installation Instructions provided.
Clean lint screen before or after
each use.
Exhaust duct or outside
exhaust hood is clogged
Proper electrical supply is
used
Clean if needed.
Properly connect the dryer to a grounded
electrical circuit that meets the electrical
requirements stated in the Installation
Instructions.
Statk
electrklty Load is overdried
Fabric softener is used
Remove items while there is still a trace
of moisture.
Use a fabric softener and follow package
directions carefully.
Synthetics, synthetic blends, Synthetics, synthetic blends, permanent
permanent press and knits are press and knits build up static electricity.
in load Use a fabric softener and be careful not
to overdry the load.
17

If You Need Assistance
Or Service
This section is designed to help you save the cost of a service call. Part 1 of this section outlines
Dossible Droblems. their causes. and actions vou can take to solve each problem. Parts 2 and 3 tell
you what’ to do if you still need assistance or service. When calling our Consumer Assistance
Center for help or calling for service, please provide a detailed description of the problem, your
appliance’s complete model and serial numbers and the purchase date. (See page 2.) This
information will help us respond properly to your request.
1. Before calling for assistance ...
Performance problems often result from little things you can find and fix without tools of any kind.
Please check the chart below for problems you can fix. It could save you the cost of a service call.
PROBLEM CHECK IF SOLUTION
Dryer will not nrn. Power cord is plugged in. Firmly plug cord into electrical outlet.
Reset controls and push start button.
Home’s main fuse has blown or Turn cycle control knob to OFF.
circuit breaker has tripped. Also Replace fuse with a time-delay fuse
check if a time-delay fuse or of the correct capacity. Reset circuit
circuit breaker has been used. breaker. Reset controls and push
start button.
Dryer door is closed. Close door firmly.
Start button is pushed firmly. Push start button.
Controls are set in a running or Set controls and push start button.
ON position.
Dryer wfff not heat. Cycle control knob is set on an Reset cycle control knob to heat
Air setting. setting.
Heat cycle is in its last minutes Wait for cycle to finish.
(there is no heat during that
time).
Home’s main fuse has blown or Turn cycle control knob to OFF.
circuit breaker has tripped. Also Replace fuse with a time-delayed
check if a time-delayed fuse or fuse of the correct capacity. Reset
circuit breaker has been used. circuit breaker. Reset controls and
push start button.
The circuit supplying an electric dryer
uses 2 breakers or 2 fuses. If one
breaker has tripped or one fuse has
blown, the dryer may run, but not
heat.
Gas shutoff valves are open both Turn cycle control knob to OFF. Open
on dryer and on supply line if gas valves. Wait 5 minutes. Reset
yours is a gas dryer. controls and push start button.
18

1 PROBLEM
Drylng tlme too
long.
CHECK IF
Lint screen is clean. SOLUTION Clean lint screen. See instructions on
page 9.
See “Slow drying” section of table,
page 17, for additional information.
Exhaust duct or outside exhaust Clean if needed.
hood is clogged.
2. If you need assistance ...
Call our toll-free telephone number. Dial
free from anywhere In the U.S.:
l-80044-ROPER
(1-800-447-6737)
4. If you are not satisfied with
how the problem was
solved ...
and talk with one of our trained consultants.
The consultant can instruct you in how to
obtain satisfactory operation from your appli-
ance or, if service is necessary, recommend a
qualified service company in your area.
If you prefer, write to:
Mr. William Clark
l Contact the Major Appliance Consumer
Action Panel (MACAP). MACAP is a group of
independent consumer experts that voices
consumer views at the highest levels of the
major appliance industry.
l Contact MACAP only when the dealer,
authorized servicer and Roper Brand
Appliance warrantor have failed to resolve
your problem.
Consumer Assistance Representative Major Appliance Consumer Action Panel
Roper Brand Appliances 20 North Wacker Drive
2000 M-63 Chicago, IL 60606
Benton Harbor, Ml 49022
Please include a daytime phone number in
your correspondence.
3. If you need service ...
Contact the dealer from whom you purchased
the appliance or the authorized servicer in your
area. For help finding an authorized servicer in
your area, call our toll-free telephone number
in Step 2.
l MACAP will in turn inform us of your action.
19

Dryer Warranty
LENGTH OF WARRANTY 1 WHAT WE WILL PAY FOR
FULL ONE-Y EAR Replacement parts and repair labor to correct defects in
WARRAN-IY materials or workmanship. Service must be provided by an
(from date of purchase) authorized Roper service company.
WHAT WE WILL NOT PAY FOR
A. Service calls to:
1. Correct the installation of your dryer.
2. Instruct you how to use your dryer.
3. Replace house fuses or correct house wiring or plumbing.
4. Replace owner accessible light bulbs.
B. Repairs when your dryer is used in other than normal, single-family household use.
C. Pickup and delivery. Your dryer is designed to be repaired in the home.
D. Damage to your dryer caused by accident, misuse, fire, flood, acts of God, or use of products
not approved by us.
E. Repairs to parts or systems caused by unauthorized modifications made to the appliance. a82
This Roper appliance is warranted by Whirlpool Corporation. Under no circumstances shall it be
liable under this warranty for incidental or consequential damages and all implied warranties are
limited to the same time period stated in the express warranties for Roper Brand Appliances.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
this limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Outside the United States, a different warranty may also apply. For details, please contact your
authorized Roper distributor or military exchange.
If you need service, first see the ‘Assistance or Service” section of this book. After checking
“Assistance or Service,” additional help can be found by calling our toll-free telephone number,
l-80044-ROPER (l-800-447-6737), from anywhere in the U.S.
PART NO. 9830862
0 los3whldpcdcoIporallon
PMed kl U.SA