Roper Roper REX3615EW0 User manual

ROPER”
Home Appliances
UseAndCare
A Note to You.. ...................... 2
Dryer Safety ....................... 3-4
Parts and Features ............... 5
Operating Your Dryer ........... 6
Before starting your dryer ...6
Starling your dryer .............. 6
Stopping/restarting
your dryer.. .......................... 7
Selecting the right cycle
and setting .......................... 7
End of cycle signal .............. 9
Using the drying rack ........ 12
Caring for Your Dryer ......... 13
Laundry Tips ....................... 18
Troubleshooting .................. 22
Requesting Assistance
or Service ............................. 24
Index.. ................................... 25
Warranty .............................. 28
1-800-44-ROPER
Call us with questions or comments.
ELECTRIC AND GAS DRYERS
PART NO. 3405518

A Note to You
Thank you for buying a ROPER@ appliance.
ROPER appliances give you all the functionality of name brand appliances at a value
price. To ensure you enjoy years of trouble-free operation, we developed this Use and Care
Guide. It contains valuable information about how to operate and maintain your appliance
properly and safely. Please read it carefully. Also, please complete and mail the Ownership
Registration Card provided with your appliance. This card helps us notify you about any new
information on your appliance.
Please record your model’s information.
Whenever you call to request service on your Model Number
appliance, you need to know your complete
model number and serial number. You can
Serial Number
find this information on the model and serial
Purchase Date
number label (see diagram on page 5 for
Dealer Name
location of label).
Please also record the purchase date of
your appliance and your dealer’s name,
address, and telephone number.
Dealer Address
Dealer Phone
Keep this book and the sales slip together in a safe place for future reference.
I
Call our toll-free number.
l-800-4477-6737 1

Dryer Safety
Your safety is important to us.
D
This symbol alerts you to
This guide contains safety statements under ! hazards such as fire,
warning symbols. Please pay special electrical shock, or
attention to these symbols and follow any 0 other injuries.
instructions given. Here is a brief explana-
tion of the use of the symbol.
WARNING: For your safety, the information in this manual must be
followed to minimize the risk of fire or explosion, or to prevent prop-
erty damage, personal injury, or loss of life.
- Do not store or use gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.
-WHAT TO DO IF YOU SMELL GAS:
l Do not try to light any appliance.
l Do not touch any electrical switch; do not use any phone in
your building.
l Clear the room, building, or area of all occupants.
l Immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions.
l If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer,
service agency, or the gas supplier.
continued on next page
3

IMPORTANT SAFETY INSTRUCTIONS
WARNING - To reduce the risk of fire, electric shock, or injury to
persons when using the dryer, follow basic precautions, including
the following:
*Read all instructions before using guide or in published user-repair
the dryer. instructions that you understand
@Do not dry articles that have been and have the skills to carry out.
previously cleaned in, washed in, *Do not use fabric softeners or
soaked in, or spotted with gaso- products to eliminate static unless
line, dry-cleaning solvents, other recommended by the manufac-
flammable, or explosive substan- turer of the fabric softener or
ces as they give off vapors that product.
could ignite or explode. .Do not use heat to dry articles
@Do not allow children to play on containing foam rubber or similarly
or in the dryer. Close supervision textured rubber-like materials.
of children is necessary when the *Clean lint screen before or after
dryer is used near children. each load.
*Before the dryer is removed from aKeep area around the exhaust
service or discarded, remove the opening and adjacent surrounding
door to the drying compartment. areas free from the accumulation
@Donot reach into the dryer if the of lint, dust, and dirt.
drum is moving. @The interior of the machine and
@Do not install or store the dryer exhaust duct should be cleaned
where it will be exposed to the periodically by qualified service
weather. personnel.
@Do not tamper with controls. @See Installation Instructions for
@Do not repair or replace any grounding requirements.
part of the dryer or attempt any
servicing unless specifically re-
commended in this Use and Care
SAVE THESE INSTRUCTIONS

Parts and Features
The parts and features of your dryer are illustrated below. Become familiar with all parts and
features before using your dryer. Page references are included next to some features. Refer
to those pages for more information about the features.
NOTE: The drawings in this book may vary from your dryer model. They are designed
to show the different features of all models covered by this book. Your model may not
include all features.
Temperature
(PP.7, 10)
Cycle control knob -
(may include
temperature settings*)
(PP.e-7)
Model and serial 1
number label
(P.2)
Dryer drum I
Other doors:
Wide-opening door*
button
(P.7)
screen
(P. 13)
Large side-swing
door*
(Reversible door.
See Installation
Instructions)
Additional features your
dryer may have:
End of cycle signal (p. 9)
Drying rack (p. 12)
Drum light (p. 15)
l On some models
5

Operating Your Dryer
The information in this section helps you learn to use your dryer efficiently and safely. Refer
to “Laundry Tips” on page 18 for additional information on sorting, loading, and drying most
types of washables.
NOTES:
l Make sure your dryer is properly vented before using it. See warning below and your
Installation Instructions.
l Make sure your dryer is properly installed in a well-ventilated room where the temperature is
above 45°F (7°C).
l Make sure your dryer is leveled on a floor that can support the weight.
Fire Hazard
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to do so can result in death
or fire.
Explosion Hazard
Never place items in the dryer that are
dampened with gasoline or other
flammable fluids.
Do not wash or dry items soiled with
vegetable or cooking oils because
they may contain some oil after
laundering.
Doing so can result in death,
explosion, or fire.
Before starting your dryer
Before using your dryer, wipe the dryer drum
with a damp cloth to remove
dust from storing and shipping.
Stapinrr vnu~c dwmr
.-...a ,VY. w.,-.
1. Load clothes into the dryer and close
the door. 2. Turn the Cycle Control Knob to the
desired cycle. Use the Energy
Preferred Automatic Setting (*)
to dry most loads (see page 8).
6

3. If your dryer has a Temperature Selector, 4. Push the Start Button.
set it to the desired setting
(see page 10).
NOTE: Your dryer stops automatically when
a cycle ends.
Stopping/restarting your dryer
You can stop your dryer anytime during
a cycle.
To stop the dryer, either:
l Open the dryer door.
To restart the dryer:
1. Close the door.
2. Select a new cycle and temperature (if
desired).
3. Push the Start Button.
OR
011
q
l Turn the Cycle Control Knob
to off.
on
NOTE: The Cycle Control Knob should
point to an Off area when the dryer is not in
use.
Selecting the right cycle and setting
The following pages describe the cycles
on your dryer. Refer to the charts on pages
1O-l 1 for help in selecting drying cycles.
Drying guidelines
l Always follow care label directions when
they are available.
l The last few minutes of all cycles are without
heat to make the load cooler to handle.
l To help reduce wrinkling, remove the load
from the dryer as soon as tumbling stops.
This is especially important for permanent
press, knits, and synthetic fabrics.
l Overdrying can cause shrinkage, static
cling, and damage to some fabrics.
l Refer to pages 18-21 for information about:
- sorting clothes for drying
- choosing load sizes
- drying tips
- using dryer fabric softener sheets
- saving energy
- drying special-care items.
continued on next page
7

Cycle descriptions
Automatic Cycle(s)
Dry most loads using the Energy
Preferred Automatic
Setting (*). Your Auto-
matic cycle(s) shuts off
when the selected
dryness is reached. The
Cycle Control Knob will
not move until the load
is almost dry. After the
cool-down, the Knob
automatically turns to an Off area and tum-
bling stops.
l If the load is drier than you like, select a
setting closer to LESS DRY the next time
you dry a similar load.
l If the load is not as dry as you like, com-
plete drying using a Timed cycle. Select a
setting closer to VERY DRY the next time
you dry a similar load.
Some models offer high heat and low heat
Automatic cycles (see page 10).
Timed Cycle(s)
Use a Timed cycle to complete drying if
some items are damp
after Automatic drying.
Timed drying is also
useful for:
*Delicate items and
small loads that need
a short drying time.
l Bulky items and large
loads that require a
long drying time.
Some models offer high heat and low heat
Timed cycles (see page 10).
No Heat/Fluff Cycle
(on some models)
The No Heat/Fluff cycle has no heat. Use this
unheated cycle to fluff or
air dry bedding, plastic
tablecloths, foam pillows,
sneakers, etc. See page
11 for more information
about the No Heat/Fluff
cycle.
NOTE: If your model
does not have the
No Heat/Fluff cycle, line dry heat-sensitive
items.
Damp Dry Cycle
(on some models)
Use Damp Dry to dry items to damp level or
to dry items that do not
require an entire drying
cycle. Two examples
are heavy cottons, such
as jeans, which you do
not want to become stiff,
or cotton clothes which
are easier to press
when damp.
Wrinkle Free Cycle
(on some models)
The Wrinkle Free cycle removes wrinkles
from clothes that have
been packed in a suit
case or closet, or from
items not removed from
the dryer at the end of
a cycle. As soon as the
dryer stops, fold or put
the items on hangers.
8

WRINKLE PREVENT” Feature
(on some models)
When you are unable to remove a load from
I the dryer as soon as it
stops, wrinkles can form.
The WRINKLE PREVENT
feature tumbles the load
without heat every few
minutes up to 45 minutes
after the cycle ends. This
tumbling rearranges and
fluffs the load to avoid
wrinkles.
You do not have to set the Cycle Control
Knob for the WRINKLE PREVENT feature. If
you do not open the dryer door within a few
minutes after the cycle stops, the WRINKLE
PREVENT feature takes over to protect the
load.
A signal sounds every few minutes
when WRINKLE PREVENT is running. The
signal and cycle stop when you open the
dryer door.
End of cycle signal
(on some models)
The dryer sounds a signal to let you know
when the cycle is finished. The signal is
helpful when you are drying permanent
press, synthetics, and other items that
should be removed from the dryer as soon
as it stops. The End of Cycle On/Off Selec-
tor is part of the Start Button, as shown.
NOTE: Unless you turn the Selector to Off,
the end of cycle signal sounds at the end of
the drying cycle.

Drying cycles chart
Use the chart below to help you make
drying selections. The chart suggests heat
settings and drying times for various loads.
NOTES:
l Use an Automatic cycle to dry most loads.
l Use a Timed cycle only if the recom-
mended Automatic cycle is not available.
l The check mark (/) in the chart below
denotes recommended temperature
settings. If some types of loads in the
chart have more than one suggested
temperature setting, choose the lowest
setting available on your dryer.
l Always follow care label directions when
they are available.
TYPE OF LOAD AUTOMATIC CYCLE TIMED CYCLE
(heat settings) (minutes)
High Medium* Low’* High Low
COlTONS AND LINENS
Extra Heavy
Bedspreads, mattress pads, quilts
Heavyweight
Towels, jeans, corduroys, work clothes
Mediumweight
Sheets, cotton underwear, diapers
Lightweight
Batistes, organdies, lingerie
J 70-80
/ 50-60
J J 40-50
J 20-30
PERMANENT PRESS,
SYNTHETICS, AND BLENDS
Heavyweight
Work clothes, jackets, raincoats
Mediumweight
Shirts, play clothes, sheets, slacks
Lightweight
Lingerie, blouses, dresses
J 40-50
J J 30-40
J 20-30
KNITS
Heavyweight
Cottons, rayons, blends, T-shirts,
slacks, shirts
Mediumweight
Synthetics (polyester, acrylic, etc.),
dress slacks, skirts, sweaters
Lightweight
Synthetics (polyester, acrylic, etc.) and
blends, lingerie, blouses, dresses
J 40-50
J 30-40
J 20-30
DELICATES”
Sheer curtains (2 or 3 panels),
gauze, lace, etc. J 15-20
l Setting available only on dryer models with separate Temperature Selector.
** If you don’t have low heat, use No Heat/Fluff cycle (if available). Line drying is also
recommended for delicate fabrics.
10

No Heat/Fluff cycle or line
drying
The chart below includes examples of items
that require drying without heat. Use the
No Heat/Fluff cycle (if available on your dryer
model), or place the items on a line or rack
to air dry.
NOTES:
l Heat-sensitive fabrics should not be dried
in the dryer.
l Line dry bonded or laminated fabrics.
l Always follow care label directions when
they are available.
Fire Hazard
Use No Heat/Fluff Cycle or line dry
items listed below.
Do not use heat to dry these items.
TYPE OF LOAD
RUBBER, PLASTIC, HEAT-SENSITIVE FABRICS
Foam Rubber - Pillows, padded bras, stuffed toys
l Make sure coverings are securely stitched.
l Shake and fluff pillows by hand several times during the
No Heat/Fluff cycle.
l Make sure pillows are completely dry. Foam rubber pillows
take a long time to dry.
Plastic - Shower curtains, tablecloths
Rubber-backed rugs
Olefin, Polypropylene, Sheer nylon
COlTON AND CANVAS SHOES
l Place several bath towels in the dryer to act as a buffer, or
place shoes on a drying rack if your dryer has one.
l Remove shoes from dryer while still damp.
l Stretch shoes and allow to air dry.
) so can result in death
% HEAT/FLUFF CYCLE*
I (minutes)
20-30
20-30
40-50
10-20
30-40
l Reset cycle as needed to complete drying.
11

Using the drying rack
(Available as an option on some models)
The drying rack lets you dry items that you
may not want to tumble. The rack does not
move, but the drum turns.
1. Fit rear legs of the rack into indentations
in the back wall of the dryer.
Lower the front so the legs
rest on the dryer opening.
4. Select the Timed drying cycle
(and temperature, if needed) or the
No Heat/Fluff cycle (see page 11).
5. Push the Start Button.
2. Put wet items on top of the rack. Leave
space between the items so
air can reach all surfaces.
NOTE: Make sure nothing
hangs over the edge of
the rack.
3. Close the door.
q
RACK DRY
Wool sweaters
(Block to shape and lay flat on the rack)
Stuffed toys or pillows
(Cotton or polyester fiber filled)
Stuffed toys or pillows
(Foam rubber filled)
Sneakers or canvas shoes
NOTES:
l See the chart below for suggested cycles
and settings for the different types of items
that might best be rack dried.
l The rack must be removed for normal
tumbling.
l Drying time will depend on how much
moisture the items hold. The following
chart suggests drying times.
l Automatic cycles do not work with the
drying rack.
CYCLE
Timed
Timed
No Heat/Fluff
No Heat/Fluff
TEMPERATURE TIME*
(minutes)
Low 60
Low 60
None; cycle is unheated. 90
None: cvcle is unheated. 30-40
l Reset cycle as needed to complete drying.
12

Caring for Your Dryer
Proper care of your dryer can extend its life. This section explains how to care for your dryer
properly and safely.
Cleaning the lint screen
Every load cleaning
The lint screen is located under a lid on top
of the dryer. Clean it before each load.
A screen blocked by lint can increase
drying time.
To clean:
1. Open the lid and pull the lint screen
towards you.
2. Roll lint off the screen with your fingers.
Do not rinse or wash screen
to remove lint. Wet lint is hard
to remove.
3. Push the lint screen firmly back into place
and close the lid.
IMPORTANT:
l Do not run the dryer with the lint screen
loose, damaged, blocked, or missing.
Doing so can cause overheating and
damage to both the dryer and fabrics.
l Some towels made of synthetic fibers and
natural fibers (polyester and cotton blends)
may shed more lint than other towels,
causing your dryer’s lint screen to fill up
faster. Be sure to remove lint from the lint
screen before and after drying new towels.
As needed cleaning
Laundry detergents and fabric softeners
can cause a residue buildup on the lint
screen. This buildup can cause longer
drying times for your clothes, or cause the
dryer to stop before your load is completely
dry. Also, if lint falls off the screen, the
screen is probably clogged.
Clean the lint screen with a nylon brush
every six months or more frequently if it
becomes clogged due to a residue buildup.
Use the following method:
1. Wet both sides of lint screen with
hot water.
2. Wet a nylon brush with hot water and
liquid detergent; scrub lint
screen with the brush to
remove residue buildup.
3. Rinse screen with hot water.
4. Thoroughly dry lint screen with a clean
towel; replace in dryer.
13

Cleaning the dryer interior
Garments which contain unstable dyes,
such as denim blue jeans or brightly colored
cotton items, may discolor the dryer interior.
These stains are not harmful to your dryer
and will not stain future loads of clothes. It
may be helpful to dry unstable dye items
inside out to prevent dye transfer.
To clean dryer drum:
1. Make a paste with powdered laundry
detergent and very warm water.
2. Apply paste to a soft cloth.
OR
Apply a liquid, non-flammable household
cleaner to the stained area and
rub with a soft cloth until all
excess dye is removed.
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death,
explosion, or fire.
3. Wipe drum thoroughly with a damp cloth.
4. Tumble a load of clean cloths or towels to
dry drum.
14

Changing the drum light
(on some models)
If your dryer has a drum light, it will be one
of two types, as shown. The dryer light
automatically turns on inside the dryer
drum when you open the door.
Fire Hazard
Replace light bulb cover before
operating dryer.
Failure to do so can result in death
or fire.
To change drum light type 1:
1. Unplug the dryer or disconnect the
electricity leading to the dryer at the main
power supply.
2. Open the dryer door. Remove the light
bulb cover from
the back wall of
the dryer by
turning the cover
clockwise.
3. Remove the light bulb by turning it
counterclockwise.
4. Replace the bulb with a 40-watt appliance
bulb only.
5. Replace the light bulb cover and lock in
6. Reconnect power supply.
To change drum light type 2:
1. Unplug the dryer or disconnect the elec-
tricity leading to the dryer at the main
power supply.
2. Open the dryer door. Remove the light
bulb cover from
the back wall of the
dryer by removing
the screw located
in the lower right
corner of the cover.
3. Remove the light bulb by turning it coun-
terclockwise.
4. Replace the bulb with a 1O-watt appliance
bulb only.
5. Replace the light bul b
6. Reconnect power supply.
15

Removing accumulated lint
Lint can gather inside the dryer and be a fuel
for fire. Lint should be removed every two to
three years, or more often, depending on
dryer usage. Cleaning should be done by a
qualified person. If you have any questions
or comments, please call our Consumer
Assistance Center at l-800-447-6737.
For all electric dryers, or gas dryers
which have a lower front access panel
NOTE: See page 17 if your dryer is gas and
has a full front panel.
1. Unplug the power supply cord or turn off
the electrical power.
2. Remove back panel (electric) or lower
front access panel (gas). See the Installa-
tion Instructions.
3. Remove lint from shaded area in illustra-
tion with a soft brush or vacuum cleaner.
Avoid damaging wires, thermostats
(electric), funnel (gas), or ignitor (gas).
4. Replace panel.
5. Reconnect and level dryer again, if
necessary.
Electrical Shock Hazard
Disconnect power before cleaning.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
Thermostats Heater Heat element
h box terminals
Electric dryer with back panel removed
Gas dryer with lower front
access panel removed
16

If your dryer is gas and has a full front
panel, remove front panel as follows:
1. Unplug the power supply cord or turn off
the electrical power.
2. Open lint screen lid. Remove two screws
from lint screen area.
3. Open top by pulling forward and up at
each front corner (see View A). Rest
raised top against wall behind dryer (top
is hinged at rear).
4. Remove two internal screws from front
panel flanges (near top front corners). Lift
front panel slightly, lifting off lower clips
(see lower clip inset of View B). Slowly
pull front panel forward, disengaging
panel from drum. (Drum will drop slightly.)
5. Move front panel aside and rest edge
against side of dryer. Avoid disconnecting
wire clips (see wire clips inset of View B)
or damaging wires.
6. Remove lint from area shown in “gas
dryer” illustration on page 16 with soft
brush or vacuum cleaner. Avoid damag-
ing wires, funnel, or ignitor.
7. Reassemble in reverse order. Before
closing the top, check the following:
-Drum seal must be flared out (see
drum seal insets of View B) and prop-
erly positioned against panel at back of
drum. Rotate drum counterclockwise
one full turn to check drum seal.
-Belt should be centered and tight on
dryer drum.
-Wire clip retainer, which holds the door
switch wires, must be secured to top of
front panel (see wire clips inset of View
B) and along top edge of side panel.
Door wires must not touch drum when
dryer is operating.
8. Replace top panel and lint screen screws.
Top and front panels must be securely in
place before operating dryer.
9. Reconnect power and level dryer again
(if necessary).
Remove screws
before opening top
View A
View B
For more information, call our
Consumer Assistance Center
I-800-447-6737
17

Laundry Tips
This section provides information on preparing clothes for drying, drying guidelines, and
instructions for drying special-care items.
NOTES:
l Refer to your Washer Use and Care Guide for proper washing techniques and additional
laundry tips.
l See pages 3 and 4 of this book for Important Safety Information.
Sorting clothes
l Separate dark from light colors; colorfast
a
w
from non-colorfast. Items
properly sorted for washing
are usually properly sorted
for drying.
l Separate lint givers (towels, chenille) from
lint takers (corduroy, synthetics, perma-
nent press). When possible, turn lint takers
inside out.
l Separate heavy fabrics (denim, towels)
from light fabrics (synthetics, permanent
press).
Choosing load sizes
l Mix large items with smaller items. Load
the dryer by the amount of
space items take up, not by
their weight. Do not overload
the dryer. Overcrowding
causes uneven drying and
l For better tumbling action, when drying
only a few small items, add one or two
lint-free towels. This also prevents small,
lightweight items from blocking airflow.
wrinkling, and can cause items to wear
out faster (because of pilling).
l You may need to rearrange large items
(sheets, blankets, tablecloths) during a
cycle to reduce balling or rolling up.
Drying tips
l Close zippers, snaps, and hooks to avoid
snagging other items. Remove
heat-sensitive trim that can
be damaged by drying. Tie
strings and sashes so they
will not tangle.
l Check garments to make sure all spots
and stains were removed during the wash.
Do not tumble dry soiled or stained items.
Heat may permanently set stains.
l Sharp or metal objects can damage your
dryer. Check pockets for pins,
clips, money, bolts, nuts, etc.
Do not lay these objects on
your dryer after emptying
pockets. Turn pockets of
heavy items inside out for even drying.
l Place small items such as baby socks or
hankies in a mesh bag for easier removal.
l Articles to be ironed should be removed
from the dryer while still damp.
18

.
Using dryer fabric softener sheets
Dryer fabric softener sheets are recom- l Remove fabric softener stains by wetting
mended for reducing static cling and for the stains and rubbing them with liquid
softening fabrics. Always use fabric softener detergent or bar soap and rewash.
sheets labeled as dryer safe and follow l Some fabric softener sheets can clog the
package instructions carefully. lint screen and slow drying if used repeat-
* Put one fabric softener sheet on top of edly. Use fabric softener sheets only once.
.-r--
l!iiizl
the load before starting the
dryer. Do not add a fabric
softener sheet after the drying
cycle has started. Instant heat
can cause the fabric softener
to spot fabrics.
Remember to remove the sheet with
the load.
Saving energy
l Use an Automatic cycle to dry most loads.
l Dry only full loads without overdrying.
l Avoid overloading dryer, adding wet items
to a partly dried load, or opening the door
unnecessarily.
l Plan your laundry to dry one load
after another. A warm dryer shortens
drying time.
l Shorten drying times by exhausting dryer
properly and cleaning exhaust duct and
outside exhaust hood as needed.
-Keep the lint screen clean.
-Use your dryer in a room where room air
temperature is above 45°F (7°C).
-Sort loads by fabric weight and type.
19

Drying special-care items
Most garments and household textiles have manufacturer’s care labels with laundering
instructions. Always follow care label directions when they are available. Pages 10 and
11 include drying instructions for most types of washables. The chart below provides drying
instructions for special-care washables.
ITEMS DRYING INSTRUCTIONS
Blankets and Machine drying knitted woolens is not recommended. Block to shape
woolens when wet and allow to air dry. Line dry blankets in the shade on a
breezy day over two lines. Pin edges together and straighten them.
When partly dry, turn the blanket over, re-pin, and re-straighten.
When dry, brush nap.
l Cotton, rayon, Dry as recommended for permanent press fabrics on page 10.
synthetic blankets
l Electric blankets, If manufacturer recommends machine drying:
electric sheets,
woolen blankets, 1. Place one or two dry towels in the dryer and preheat 3-5 minutes
washable woolen on a high setting. This will dry blankets faster and help avoid
pilling.
garments 2. Put blanket in dryer with warm towels. Set control for 20 minutes.
3. Check after 10 minutes. Remove when still damp. Overdrying and
long tumbling can cause shrinking and pilling.
4. Place blanket on flat surface, or over two lines to finish drying.
Gently stretch to original size and shape.
5. When completely dry, brush gently to raise nap. Press binding
with cool iron if needed.
Curtains,
slipcovers
l Draperies,
slipcovers
Remove drapery weights and hooks before laundering.
For slipcovers, replace while still slightly damp. They will dry to fit
tightly.
Dry only a few minutes.
1. Leave room in dryer for load to fluff.
2. Remove from dryer while slightly damp. Do not overdry.
Diapers, baby
clothes Wash and dry small items in a mesh bag or pillowcase for
convenient handling.
Remove diapers and cotton knit items while still slightly damp. They
will feel softer, shrink less, and be easier to fold.
Elastic items
Flame-retardant
finishes
Remove from dryer while still slightly damp.
Some items have been treated with a flame-retardant finish to
improve their resistance to burning. Such items are clearly labeled.
To retain flame-retardant qualities through continuous use and
washing, clean and dry according to the manufacturer’s instructions.
20