Ropox taylordolman 40-14140-6 User manual

Bathtub
User Manual
Mounting Instructions
Keep this folder with product at all times!
PDF6016 /01.05.2011
40-14140-6, 40-14142-6, 40-14143-6,
40-14144-5, 40-14145-6, 40-14146-6

2
Generalinform ation
Contents
Generalinform ation Part Numbers 3
Technical data 3
UserManual Dailyuse 4
Mounting instructions Mounting 5
Electricalcom ponents W ire diagram 6
Connections 7
Control switch hook 7
Labelling Label 8
Symbol view 8
Faultfinding 9
Maintenance Maintenance 10
Cleaning 10
Options Shower bed tilt able 11
Mountingof Shower bed 12
Bed guard,foldable 13
CE-M arking 14
Com plaints 15
Product Information
Product: Bathtub,height adjustable
Producer: Ropox,DK-4700Naestved,Phone [phone]
Usability
- The height adjustable Bathtubcanbe used for washing and bading
childrenand adults of up to 250Kg.The Bathtubcanbe used at home,inday
care centre or institutions to obtaingood and correct workingconditions for the
caretakers.
Byusingthe up ▲ down ▼ buttononthe handheld control switch,the height
adjustment of the Bathtubcanbe performed.
It is important to read this manual before mountingand
dailyuse.

3
Generalinform ation
Partnumbers
Technicaldata
Electrical connection: 230V,50Hz,max2.0A,Used parts are type B
Dutycycle: Max10% ,2 min/18 min
Height: Bathtub65 – 95 cm
Lever 78 –108 cm
Material –Frame: Stainless and aluminium
Bathtub: Enamelled
Surface treatment: Powder coating,white RAL 9010matt,Chromate
Maximum load: 350kg.Recommended maximum user weight
250kg
This product has CE-marking according to ”Medical equipment,Low
Voltage and EMC directives. Has been tested according to the
European standards DS/EN ISO 12182 and DS/EN ISO 60601-1.This
product is inriskgroup 1.
Length /width 140x70cm 150x70cm 160x70cm 170x70cm 180x80cm 190x90cm
Bathtub 40-14142-6 40-14143-6 40-14140-6 40-14144-5 40-14145-6 40-14146-6
Length
W idth

4
UserManual
Dailyuse
The height of the Bathtubcanbe adjusted between65-95cm to give the
caretaker the most optimal workingheight
Byusingthe up
▲ down ▼ bottom onthe handheld control switch,the
height adjustment of the Bathtubcanbe performed.The control switch has a
spiral cord,which canbe pulled out to a length of 200cm.
It is advisable always to leave the Bathtubinlowest positionafter each use.
If the control switch has beendamaged or stopped working,it has to be replaced
immediately.The up and downbuttons are “push and hold”.The motor stops
whenthe buttonis beingreleased.This is a veryimportant safetyelement.
Maks last er 350 kginkl.vann.Anbefalt maksimal brukervekt er 250 kg.
Max.Load incl.water is 350kg.Recommended max.user weight 250 kg
Be aware of trapping risk when the Bathtub is moving up or down,also be
aware of trapping riskif other products or similar items has been placed up
against the Bathtub.Be aware that the Mixer tap is 22cm heigher than the
Bathtub.If mounting tiltable Shower bed,the height of the Bathtub will be
increased with 5 cm.
65 - 95cm
87 - 117cm

5
Mounting Instructions
Mounting
The Bathtubis delivered fullyassembled.
Place the Bathtubonthe spot that you want,adjust the 4 adjustingscrews
under each legso that it is steadyand horizontally.
Connect water inlet,and the outlet connects to the drain.
Mains cable connects to 230V,50Hz
Mains cable 230V
L= 350cm
Flexible hoses
L= 100cm
Flexible hoses can
reach 12 cm outside
the frame.
Hose connections for
water is 2 pcs.½”
outside threat.
Flexible outlet hose L= 40-110cm
Be aware of the heightadjustment
of the Bathtub(30cm)when
placingthe drain!
Placement of the mainpower socket must be performed according
to National or International regulations /standards

6
1
5 2
4 3
ElectricalCom ponents
W irediagram
The Bathtubis delivered with the control boxalreadymounted onthe frame.
The diagram shows how the cables are connected to the control boxplaced at
the inside of the cover panel.
All the plugs are water tight,and therefore theycanbe a little trickyto connect /
disconnect.Make sure that the plugs are positioned correct before theyare
pushed into the sockets at the control box.The plugs must be pushed into the
sockets until the “O-ring”is no longer visible.
Motor,control boxand control switch applyto IP66.This means that theyare
dust tight and protectied against heavyseas,or powerful jets of water.
The electronic system are designed for periodical use only,this means a max.
dutycycle of 10% ;2minon/18minoff.
1. Control box
2. Mains cable 230V
3. Motor,connects to plug1 & 3
4. End plug,connects to plug2 & 4
5. Control switch

7
Safe locking
bracket
ElectricalCom ponents
Connections
Motor cables connects to plug1 & 3.
Plug2 & 4 are not inuse and blocked.
Control switch connects to ”HB”.
W henall cables has beenconnected,
use the safe lockingbracket.Pushed
inuntil you hear a “click”.
Mains cable connects to the plugat the
side of the box.
Disconnections
Mains cable canbe pulled out (no safe lockingbracket).
Before the other cables can be disconnected,the safe locking bracket needs to
be released /removed.Locking clips at each end of the safe lockingbracket has
to be released before the bracket can be removed,and the cables can be
disconnected.
Placem entofthehand control.
Bracket for hand control can be placed at the corner of the bathtubas shown.To
be mounted with the two screws that are delivered with the bracket.
!!! The bracket should
only be used when the
bathtub is under
supervision.Inanyother
situation, the hand
control shall be kept out
of the reach of children.
The bracket can also be
placed on the wall.This
for safetyreasons only.
To obtainthe full IP66 value,it is veryimportant that all the plugs has been
pressed firmlyinto the plugs and the safe lockingbracket is mounted.

8
Marking
Label
Each bathtubhas its ownlabel as shown.The label contains manyinformation’s
which is veryimportant to specifywhencontacting your supplier.It also shows
mainpower supply.
Sym bolview:
User Manual must be read before use
W aste must be sorted.Most parts for re-use.
NEMKO approval
DEMKO approval
SEMKO approval
Type B equipment.As for EN 60601-1
Class 2 equipment.W ithout earth connection.
CE-marking.This product complies to the demands for general safety
and functionalityinthe relevant EU directives and standards.
EMC information
The bathtubcomplyto the demands for electromagnetic compatibility
(EMC),if installationand dailyuse is accordingto instructions inthis
Manual.
Inseldom situations the bathtubmight be affected byelectronic signals
from ex.Portable computers,cell phones etc.
i
350KG
Max.Load,
person+water
Serial No.
Mainpower 230Vac,50Hz
Max.consumption2,0A
Ingress Protectionclass for
dust & water intrusion
Item No.
Name /
model
2 min.continous
use at max.Load -
herafter 18 min.
rest
Production
year & month
See explanation below

9
Faultfinding
Faultfinding
W aist handling
Used equipment shall be disposed accordingto the National law.W e
recommend to dismount the product to the greatest extent possible,ina
waythat most parts canbe reused.Be aware that this product contains
electronicallycomponents.Example for groups this product canbe
sorted in:metal,plastic,cables,electronics and parts for destruction.
Factors affectingthe operation
Temperature: 5°C to 45°C
relative humidity: 5% to 85% non-condensing
Factors affectingstorage and transport
Bathtubdo not move up
or downbyusingthe
hand control
Checkif:
Mainpower connected 230V.
Motor is connected to control box
Hand control is connected to control box
Motors are over loaded
Hand control defect Checkif:
Bathtubworks with another hand control
Bypressingthe up or
downbutton,no
movements achieved,
onlyclickingsounds is
heard from controlbox
Plugs are not connected correctly.
Dismount all cables and re-connect.
Might need a “reset”–see
Bathtubis not horizontally Perform a “Reset”
Push and hold both the up ▲and down
▼
button,keep the pressure until the controlbox
has givenapprox..10“Bips”.After that push
the
▼ button.
i
i

10
Maintenanceand cleaning
Maintenance
Afteronem onth:
Check: Mountingof the Mixer tap
Connections for Flexible hoses /hoses
Onceayear(m inim um ):
Bringthe bathtubto the top positionand checkthat:
Bolts intop and bottom of the motors are tightened
All connections (inlet and waste)are ok,and without anydamages.
Lever and shower head are workingcorrect without anydamages.
Frame and cover plates are ingood condition.
Cleaning
To cleanthe bathtubdo not use a high-pressure washer.The bathtubis not
machine washable.
Simplyuse a soft cloth or sponge with soapywater of max60°C.Always clean
the bathtubafter use to prevent dirt from stickingto the surface.
Important:
Do not use scouringpowder or other abrasives as theymayscratch the paint
and cover
plates.Also avoid the use of cleaningutensils with sharp edges.Never use
strongmineral acids or alkali.
Bathtub
Enamelled bathtubs have a hard and smooth surface.Theyare easyto keep
clean,usingfor instance a detergent and a soft brush or sponge.
Always cleanthe bathtubafter use to prevent dirt from stickingto the surface.
Important!:Do not use scouringpowder or other abrasives as theymayscratch
the enamel.Also avoid the use of cleaningutensils with sharp edges.Never use
strongmineral acids or alkali.
The bathtubmaybe used for washing of clothes,usingnormal detergents.
However,do not soakfor a longer period of time as certaindetergents may
containaggressive substances.
Mixertap,hand showerand showerhose:
Cleanthe hand shower at regular intervals with a soft cloth or soapywater.
Decalcifyand remove dirt deposits with vinegar and rinse carefullywith clean
water.Decalcifythe air mixer of the mixer tap at regular intervals.
To cleanthe chromium-plated surfaces do not use strongcleaningagents.

11
Options
Showerbed,tiltable
Tilt able shower bed canbe supplied as anoption,and mounted onexisting
bathtubs.The shower bed canbe mounted either right or left hand side.See
mounting.Available sizes accordingto this scheme.
Length/width 129x68cm 139x68cm 149x68cm 159x68cm 169x78cm 179x88cm
Shower bed 40-14102 40-14103 40-14100 40-14104 40-14105 40-14106
Bathtub 40-14142 40-14143 40-14140 40-14144 40-14145 40-14146
Please be aware that whenmountingthe shower bed,the height increases
with 5cm.
W idth 68:136 - 166cm
W idth 78:146 - 176cm
W idth 88:156
-
1
86
cm
70
-
100cm

12
Options
Mounting theShowerbed
If the shower bed has beenordered together with the bathtub,it will be mounted
“right”.If you wish to have it mounted “left”,you need to specifythat whenplacing
the order.
”Left”bracket
40-14100-031
”Left”bracket
40-14100-030
”Right”
bracket
40
-
14100
-
031
”Right”
bracket
40
-
14100
-
030
”Right mounted”
Definition:
Mixer tap is mounted inright
hand side of bathtub
”Left”mounted
Definition:
Mixer tap is mounted onleft
hand side of bathtub

13
Options
Bedguard,foldable
Foldable Bed guard inlength 110cm is available as anoption.To be mounted on
the side of the bathtubonthe angle bracket.
Be aware that the Bed guard is the same,but the angle bracket is delivered in
different lengths,dependingonthe length of the Bathtub.
Angle bracket 40-25950 40-25952 40-25953 40-25954 40-25955 40-25956
Bed guard
110cm 40-25962 40-25962 40-25962 40-25962 40-25962 40-25962
Bathtub 40-14142 40-14143 40-14140 40-14144 40-14145 40-14146
Bed guard
Angle bracket

14
CE-Marking
EU –Declaration ofConform ity
Iherebydeclare under sole responsibilitythat the followingproducts:
40-14140 Aqua line Bathtub length xwidth 160x70cm
40-14142 Aqua line Bathtub length xwidth 140x70cm
40-14143 Aqua line Bathtub length xwidth 150x70cm
40-14144 Aqua line Bathtub length xwidth 170x70cm
40-14145 Aqua line Bathtub length xwidth 180x80cm
40-14146 Aqua line Bathtub length xwidth 190x90cm
are all under ClassificationClass Iand inconformitywith the followingdirectives and
standards:
DIRECTIVES
•The Council Directive No.93/42EEC,concerningMedical Devices
amended through Directive No.98/79/EC
•73/23EEC Directive for Low-voltage,amended through Directive
No.93/68/EEC
•89/336/EEC,EMC-Directive,amended through Directives No.92/31/EEC and
93/68/EEC
STANDARDS
DS/EN 1041: 2009 DS/EN ISO 10993-1: 2009
DS/EN 14971: 2008 DS/EN 60601-1+CORR: 2006
DS/EN 12182: 2002 DS/EN 60601-1-2: 2007
DS/EN ISO 9999: 2009
Date:
17-07-2009

16
ROPOX A/S
Ringstedgade 221
DK –4700Naestved
Tel.:[phone] Fax.:[phone]
E-mail:info@ ropox.dk
www.ropox.com