Ropox AdaptLine 40-42010-2 User manual

TF 200.01.0042_eng / Dato 29-07-2022
Ropox AdaptLine Manual
User Manual and Mounting Instructions
This manual must always accompany the product.

2
TF 200.01.0042_eng
Contents
1. SYMBOLS USED IN THIS MANUAL ........................................................................................................3
2. GENERAL SAFETY................................................................................................................................... 3
2.1 PRODUCT UNIT LABEL....................................................................................................................................5
3. GENERAL REQUIREMENTS.................................................................................................................... 6
3.1 PRODUCT INFORMATION.................................................................................................................................6
3.2 PRODUCT DESCRIPTION.................................................................................................................................6
3.3 INTENDED USE...............................................................................................................................................6
3.4 INTENDED OPERATOR ....................................................................................................................................6
3.5 DIMENSION DRAWINGS...................................................................................................................................7
3.6 USE..............................................................................................................................................................9
3.7 SAFETY IN USE ............................................................................................................................................10
3.8 CLEANING ...................................................................................................................................................10
4. MOUNTING INSTRUCTIONS.................................................................................................................. 11
4.1 INSTALLATION INFORMATION.........................................................................................................................11
4.2 CONNECTION ADAPTERS..............................................................................................................................12
4.3 LIST OF COMPONENTS..................................................................................................................................13
4.4 MOUNTING INSTRUCTIONS............................................................................................................................14
5. SERVICE INFORMATION .......................................................................................................................17
5.1 MAINTENANCE.............................................................................................................................................17
5.2 PERFORMANCE TEST ...................................................................................................................................17
6. SPARE PARTS........................................................................................................................................ 17
7. ENVIRONMENTAL PROTECTION .........................................................................................................18
8. COMPLAINTS.......................................................................................................................................... 18

3
TF 200.01.0042_eng
1. Symbols used in this manual
2. General safety
This manual must be read and understood before use. Always
keep this manual in close proximity of the product.
The use, installation and service of this product must be in
compliance with this manual to avoid accidents and serious
personal injury.
Never use or handle this product in other ways specified in
this manual as it can result in personal safety hazards and/or
cause damage to the product.
Persons installing and/or using this product either as operator
or user should have the necessary safety information and
access to this manual.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
designated persons in order to avoid a hazard.
Warning Symbol
Indication of potentially hazardous situation. If not avoided, it can result in serious injury or
death.
Caution Symbol
Indication of potentially hazardous situation which may result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Notification Symbol
This symbol is used to notify correct use and handling of the product.

4
TF 200.01.0042_eng
Do not perform repairs, disassembly or assembly operations,
add-ons, re-adjustments or modification of the product beyond
what is described in this manual. These must be carried out by
Ropox or Ropox authorized personnel. Do not perform service
while in use.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children
without supervision.
Do not use the product if it has defects or have become
damaged before being repaired or replaced.
If the control box makes unusual noise or smells, switch off
the mains voltage immediately.
Take care that the cables are not damaged.
Unplug the mains cable on mobile equipment before it is
moved.
The products must only be used in an environment that
corresponds to their IP protection.
The information in this manual is based on correct installation
in accordance with installation instructions for this product.
Ropox cannot be held liable if the product is used in any way
that differs from stated in this manual and/or installation
instruction.
Ropox reserve the right to amend this manual and reference
documents without prior notice.

5
TF 200.01.0042_eng
2.1 Product Unit label
This product is UKCA-marked in accordance with:
UK SI 2002 No. 618 - The Medical Devices Regulations 2002, and its amendments
UK SI 2008 No. 1597 - The Supply of Machinery (Safety) Regulations 2008, and its
amendments
This product is CE-marked in accordance with:
European Medical Device Directive 93/42/EEC, including
amendments incorporated in Directive 2007/47/EEC.
European Medical Device Regulation (EU)2017/745
Council Directive 2006/42/EC on machinery
Council Directive 2011/65/EU, RoHS
Manufacturer name and address
Date of production
Stock number
Serial number
Consult manual for important safety related information, warnings and safety
precautions.
Do not dispose as unsorted municipal waste. Product must be returned to a
designated recycling station.
Operating and storing temperatures may not exceed 5-40C°
Consult the instructions for use
Ropox AdaptLine Washbasin Complete
Manual, 60cm standard

6
TF 200.01.0042_eng
3. General requirements
3.1 Product information
Manufacturer
Ropox A/S
Ringstedgade 221, DK-4700 Naestved
[phone]
[email protected]
Product models
Part number
Model
Configuration
40-42010-2
40-42011-2
40-42012-2
40-42110-2
Ropox AdaptLine Vask Complete
Ropox AdaptLine Vask Complete
Ropox AdaptLine Vask Complete
Ropox AdaptLine Unit
Standard
Support
Hospital
Expected service life
5 years
MDR Class
2017/745
Class I
Intended environments
This product is to be used only in:
Professional Healthcare Environment
Homecare Environment
Maximum user weight
according to
EN17966:2016
40-42010-2 = 165 kg / 363 lbs
40-42011-2 = 165 kg / 363 lbs
40-42012-2 = 120 kg / 264 lbs
40-42110-2 = 200 kg / 440 lbs
Height adjustment
20 cm / 7,8 in
Ambient temperature
range
-5 °C to +40 °C Transport and storage
+5 °C to +40 °C Operation
Relative humidity:
20% to 80% - non-condensing
Materials in contact
with patient
Wash basin
Mixer tap
Cover
Top cover
40-42010: Porcelain
40-42011: Synthetic/marble composite, with gel coat surface
40-42012: Porcelain
Chrome
St37 tube construction with powder coating
ABS
Accessories
Flexible handle
Plumbing kit
40-42170
40-25731
3.2 Product description
AdaptLine is a height-adjustable unit where you can mount a disability-friendly washbasin. AdaptLine has a
convenient and compact design which makes it highly suitable for smaller bathrooms where space-saving
solutions are required.
3.3 Intended use
The AdaptLine washbasins are available with manual height adjustment to better the use for wheelchair users
and walking impaired patient. Height adjustment is done with the small crank. The height adjustment range is
20 cm / 7,8 in.
3.4 Intended operator
Reading and understanding this manual will be sufficient training for an intended operator. Children or patient
are not considered intended operator.

7
TF 200.01.0042_eng
3.5 Dimension drawings
40-42110
40-42010
NB: All dimensions are in cm / in
38 cm / 15 in
28 cm / 11 in
31,2 cm / 12,3 in
5 cm / 2 in
35 cm / 13,8 in
Ø1,2 cm / 0,5in

8
TF 200.01.0042_eng
40-42011
40-42012
NB: All dimensions are in cm / in

9
TF 200.01.0042_eng
3.6 Use
Height adjustment
The washbasin height can be adjusted by means of the flexible handle. The grey top cover must be
dismounted first, however.
Then mount the flexible handle on the hexagonal shaft. Subsequently, the washbasin height is adjusted by
turning the handle.
Note!
Be careful not to swing the crank into the mirror or tile on the wall. They can break.
Caution!
When the unit is adjusted in height, it is possible to squeeze fingers between the cover and the
unit.

10
TF 200.01.0042_eng
3.7 Safety in use
➢Ropox AdaptLine may only be used by persons who have read and understood these instructions.
➢Always use the product in a manner excluding the risk of damage to persons or property. The person
operating the Ropox AdaptLine is responsible for avoiding damage or injury.
➢Any modification which may influence the performance or construction of the product is not allowed.
➢Installation, service, and repairs may only be carried out by qualified personnel.
➢During inspection, service, or repairs any load must be removed from the unit.
➢Be aware of water splashing from the wash basin during use or adjusting the height. A wet floor will
result in a slipping hazard.
3.8 Cleaning
During use, the product may get dirty. It is very important to clean the unit as described in these instructions.
Cleaning of unit
Ropox AdaptLine may be wiped with a wrung cloth with lukewarm water and a mild detergent. Do not use
corrosive/grinding fluids or scouring sponges.
Disinfection may be done with household disinfectants.
Cleaning of washbasins
Wash the surfaces daily with water and wipe off with a dry cloth. Do not use detergents containing hard
abrasives –e.g. steel wool, scouring powder, or sulphuric acid.
If the water has a high calcium content, calcareous deposits will often occur in the washbasin. These deposits
should be removed at least once a week by using a detergent containing citric acid, acetic acid, or phosphoric
acid. Leave the detergent to work for 5-10 minutes depending on the thickness of the deposits and clean
thoroughly with a soft sponge.
Disinfection of the washbasin may be done with household disinfectants.
Note!
Do not use cleaning agents containing abrasive e.g. scouring powder, steel wool, scouring
sponge.
This product is not designed to be sterilized, autoclaving and sterilization beyond normal
cleaning is may possibly change the product safety and function.

11
TF 200.01.0042_eng
4. Mounting instructions
4.1 Installation information
Construction
The wall must of a suitable material for screws and
approved for wet rooms.
The grey-shaded area states the minimum area for
reinforcement of the wall.
Load tested in accordance with DS/ISO
17966:2016, the max. user weight is:
40-42010: 165 kg / 363 lbs
40-42011: 165 kg / 363 lbs
40-42012: 120 kg / 264 lbs
40-42110: 200 kg / 440 lbs
Max. tensile load of top screws
40-42110: 50 kg / 110 lbs
40-42010: 50 kg / 110 lbs
40-42011: 50 kg / 110 lbs
40-42012: 50 kg / 110 lbs
Plumbing
The drain is Ø32 mm / 1,3 in.
The water supply ends with 2 (two) 90° stop valves
with ½” outside thread pointing downward.
All hoses for water and drain installations must be
flexible to ensure free and unhindered adjustments
within the height adjustment range of 70-90 cm /
27,5 –35,4 in (the upper side of the washbasin).
For the purchase of adapters for connection to
various standard installations, see the section
”Connection adapters”.
Note:
All dimensions are based on a washbasin height
of 700-900mm / 27,5 –35,4 in above floor level. If
a change of this height is required, the
recommended dimensions must be changed
accordingly.
610 mm / 24 in
300 mm / 11,8 in
1000 mm / 39,4 in
908 mm / 35,7 in
700 –900 mm / 27,5 –35,4 in
500 mm / 19,7 in
250 mm / 9,8 in
180 mm / 7,1 in
90 mm / 3,5 in

12
TF 200.01.0042_eng
4.2 Connection adapters
The below components illustrated in blue are available depending on the type of installation in the building.
Water connection adapters
Hoses from washbasin
Adapter
Installation in room (not
included)
No adapter needed
1/2"
Thread
1/2" -> 3/8"
Item no. 97001670
3/8"
Thread
1/2" -> 15mm / 0,6 in
Item no. 97001666
15mm / 0,6 in
Pipe
Water hose extensions
Hose from washbasin
Coupling piece
Extra hose
1/2" -> 1/2"
Item no. 97001669
1/2" x 1/2", 05m, steel
Item no. 97001123
1/2" x 1/2", 1m, plastic
Item no. 97001120
Drain adapters
Drain from washbasin
Adapter
Installation in room (not
included)
No adapter needed
Ø32 mm / 1,3 in
Ø32mm/1,3in ->
Ø40mm/1,6in
Item no. 97001660
Ø40 mm / 1,6 in
Ø32mm/1,3in ->
Ø50mm/2in
Item no. 97001661
Ø50 mm / 2 in
Drain extensions
Drain hose from washbasin
Coupler
Extra drain hose
Ø32mm/12,6in-
Ø32mm/12,6in
Item no. 97001062
Ø32mm/1,3in Flex hose, 27-62cm/10,6-24,4in
Item no. 97001162
Ø32mm/1,3in Flex hose, 40-110cm/15,7-43,3in
Item no. 97001161
1/2”
Ø32
Ø32

13
TF 200.01.0042_eng
4.3 List of components
1 (one) height adjustment unit
40-42110
List of components for Complete models 40-42010, 40-42011, and 40-
42012
1 (one) washbasin
40-42010 (A), 40-42011 (B), 40-42012 (C)
1 (one) mixer tap
Oras Saga 3910F
1 (one) plumbing kit
1 (one) 97001601 Siphon
1 (one) 97001162 Flexible drain hose ø32
2 (two) 97001035 Drain elbow 88,5°
2 (two) 97001012 Nipple ½” to 3/8”
2 (two) 97001123 Connecting hose ½” 0.5m
1 (one) kit of mounting parts for bolt
mounted washbasin
1 (one) replacement screw for drain
Ø4.8x70 A2 (only for 40-42010)
2 (two) bolts
M12x65
A
B
C

14
TF 200.01.0042_eng
4.4 Mounting instructions
Prior to the installation, please make sure that all parts have been provided in accordance with the list of
components.
300 mm / 11,8 in
69 mm/ 2,7 in
1000 mm / 39,4 in
908 mm / 35,7 in
610 mm / 24 in
700 –900 mm / 27,5 –35,4 in

15
TF 200.01.0042_eng
Caution!
When mounting a porcelain washbasin, an insolation foam pad MUST be placed between
the washbasin and the unit. It is recommended to grout around the washbasin.

16
TF 200.01.0042_eng
500 mm / 19,7 in
250 mm / 9,8 in
180 mm / 7,1 in
90 mm / 3,5 in

17
TF 200.01.0042_eng
5. Service information
5.1 Maintenance
Ropox AdaptLine is maintenance-free. Moving parts have been lubricated for life. For reasons of safety and
reliability, we recommend a performance test once a year.
5.2 Performance test
After one month
Check:
Mounting of bolts and screws
Ropox AdaptLine moves unhindered within its height adjustment range.
6. Spare parts
For 40-42110-2, 40-42010-2, 40-42011-2 and 40-42012-2
Caution!
Inspections, service, and repairs must be carried out by qualified personnel
#
Description
In product
Item no.
1
Ropox AdaptLine Unit Manual
1
40-42110-1
2
Mixer tap Oras Saga 3910F
1
97001706
3
Mounting parts for bolt mounted washbasin
1
97001467
4
Bolt M12x65
2
95041265
5
Stainless screw ø4.8x70 (only for 40-42010-2)
1
95091070
6
Plumbing kit for AdaptLine unit
1
40-25731-1
7
60cm washbasin (only for 40-42010-2)
1
97001578
8
60cm straight support washbasin (only for 40-42011-2)
1
97001582
9
64cm hospital washbasin (only for 40-42012-2)
1
97001576
7
8
9

18
TF 200.01.0042_eng
7. Environmental protection
The product is not intended to be disposed as municipal waste. Proper disassembly, sorting
and disposal of components must be done by waste disposal professionals.
Part
Disposal recommendation
Wash basin
Ceramic
Unit
Steel waste
Top cover
Plastic
8. Complaints
See our general terms of sale and delivery on www.ropox.com
ROPOX A/S
Ringstedgade 221
DK –4700 Næstved
Tel.: [phone] Fax.: [phone]
E-mail: [email protected]
www.ropox.com