Rosen Car Show CS104LCD User manual

C
Ca ar r S Sh ho ow w
™
10.4” OVERHEAD MONITOR
CarShow
USERS MANUAL
V1.0

1
INDEX
NO CONTENT PAGE
1 Specifications 2
2 Installation Instructions 3-4
3 Monitor Controls 6-7
4 OSD Settings 8-9
5 Wiring Harness 10
6 Precautions 11
Intended Use/Registrations 12

2
1. Specifications
Resolution 800(H) × 600(V) x 3(RGB) (1,440,000) Pixels
Display Area 211.2(H) ×158.4(V)
Size 10.4" TFT
Brightness 280 cd/㎡
㎡㎡
㎡
Response Time 15 millisecond
View Angle Top=30°, Bottom=50°
Left=50°, Right=50°
Video Input Composite Video (RCA)(F) ×2
(NTSC, PAL, SECAM)
Audio Input Stereo Sound Input (RCA)(F) ×2
Power Input DC 12~35V, 3A(Max)
Audio Output IR Transmitter 2.3MG&2.8MG
Left and Right Composite Audio Out
Display Key (6 Key) Control
Control Function Wireless Remote Control
Monitor
Adjustments
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
SATURATION
Power
Consumption 10W (MAX)
Operating
Temperature
Operating: 0~50℃
℃℃
℃/ 32~122oF
Storage: 0~60℃
℃℃
℃/ 32~140oF
Weight/
Dimensions 2.5kg ±200g / 5.5 lbs 1.70”(H) x 12.18”(W) x 12.27”(L)

3
2. Installation
Step 1
NOTE: The mounting bracket is directional and
must be aligned to the monitors mounting
holes. Pay special attention to the proper
screw locations.
Mounting Bracket
Screw Locations
Step 2
Attach the mounting bracket to the vehicles
roof support beam using the provided screws.
NOTE: 2 different screw lengths are included.
Use the correct length for the installation.
Outer Roof Roof Support Beam
InstallationBracket
CarShow™ 10.4Monitor

4
Step 3
Attach the monitor to the mounting bracket with
the provided screws. Screw locations shown
with arrows
See Step 1
Note bracket alignment to monitor position

5
3. Monitor Controls
MonitorMountedControlOperation
1 2 3 4 6 5 DomeLightsON/OFF
1. Power：
：：
：Push this button to Power ON or OFF the LCD.
2. ” - “：
：：
：Push this button to decrease the degree of the
function that you selected.
3. ” + “：
：：
：Push this button to decrease the degree of the
function that you selected.
4. MENU/SELECT：
：：
：Push this button to show the menu list
and select the menu function.
5. V1：
：：
：Push this button to select Video 1 input.
6. V2: Push this button to select Video 2 input.

6
Remote Control Operation
(1) POWER：
：：
：Push the RED button to Power On or Off the
LCD.
(2) SELECT：
：：
：Push this button to select Video 1 or 2 Input.
(3) MENU：
：：
：Push this button to show the menu list and
select the menu function.
(4) UP：
：：
：Push this button to decrease the degree of
the function that you selected.
(5) DOWN：
：：
：Push this button to decrease the degree of
the function that you selected.
(1)
(2)
(3)
(4)
(5)
CarShow™

7
4. OSD Functions
OSD MENU LIST
BRIGHTNESS:
Adjust the brightness of screen.
Adjustment Range：
：：
：0 ~ 15
CONTRAST:
Adjust the contrast of screen.
Adjustment Range：
：：
：0 ~ 31
SHARPNESS:
Adjust the sharpness of screen.
Adjustment Range：
：：
：0 ~15
HUE:
Adjust HUE function.
Adjustment Range：
：：
：0 ~ 62
SATURATION:
Adjust the Saturation of picture.
Adjustment Range：
：：
：0 ~ 62
VIDEO 1
CONTRAST 21
VIDEO 1
BRIGHTNESS 15
VIDEO 1
SHARPNESS 7
VIDEO 1
HUE 31
VIDEO 1
SATURATION 31

8
DEFAULT:
Return to the original LCD settings
SAVE AND EXIT:
Save your personal settings and
exit to Menu mode.
VIDEO 1
DEFAULT (VX.XX)
VIDEO 1
SAVE AND EXIT

9
5. Wiring Harness
Accessories Description
1
Power cable w/ 3A/250V Fuse
Yellow：
：：
：Video input 1,
Videoinput2
Red: Audio input (R)1,
Audio input (R)2
White: Audio input (L)1,
Audioinput(L)2
Power input connector:
Red: 12v+ Switched
Black:Ground