Rosewill RV-430-2-FRB User manual

POWER SUPPLY VALUE Series
USER Manual
www.rosewill.com
RV-380-2-FRB
RV-430-2-FRB
RV-480-2-FRB

POWER SUPPLY Value series User Manual
1
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Contents
Features Descriptions
Specification
Installation
1. Installing Power Supply
2. 20+4 pin Main Connector
3. 4 pin 12V Connector
4. 6 pin PCI-Express Connector
5. 4 pin Molex Peripheral Connector
6. 4 pin Floppy Connector
7. 5 pin SATA Connector
8. Before starting your system
Information
P. 2
P. 3
P. 7
P. 7
P. 8
P. 8
P. 9
P. 9
P. 9
P. 1 0
P. 1 1

POWER SUPPLY Value series User Manual
2
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
• ATX V2.01 Dual 12V Rails
Features Descriptions
• Dual 80mm Fan
• 20+4 pin Main Connector • 1 x PCI-Express Connector

POWER SUPPLY Value series User Manual
3
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Specification
• 20+4 pin Main Connector x 1 • 4 pin 12V Connector x 1
• 6 pin PCI-Express Connector x 1
Connectors
RV380-2-FRB
• 4 pin Molex Peripheral Connector X 6
• 5 pin SATA Connector x 2 • 4 pin Floppy Connector x 2

POWER SUPPLY Value series User Manual
4
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
• 20+4 pin Main Connector x 1 • 4 pin 12V Connector x 1
• 6 pin PCI-Express Connector x 1
RV430-2-FRB, RV480-2-FRB
• 4 pin Molex Peripheral Connector X 8
• 5 pin SATA Connector x 2 • 4 pin Floppy Connector x 2

POWER SUPPLY Value series User Manual
5
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Input
AC Input Voltage : 115V/230V
AC Input Frequency : 50/60HZ
AC input Current :
115V 230V
RV380-2-FRB 6.0A(RMS) 4.0A(RMS)
RV430-2-FRB 7.0A(RMS) 4.5A(RMS)
RV480-2-FRB 8.0A(RMS) 5.0A(RMS)
Output
RV380-2-FRB
Voltage +3.3V +5V +12V1 +12V2 -12V +5VSB
MAX.Current 30A 28A 14A 15A 0.6A 2A
MAX.Watt 130W 233W 7.2W 10W
Total Watt 380W
Regulation ±5% ±5% ±5% ±5% ±10% ±5%
Noise & Ripple (mV) 100 100 120 120 200 100
RV430-2-FRB
Voltage +3.3V +5V +12V1 +12V2 -12V +5VSB
MAX.Current 30A 29A 14A 15A 0.6A 2A
MAX.Watt 140W 273W 7.2W 10W
Total Watt 430W
Regulation ±5% ±5% ±5% ±5% ±10% ±5%
Noise & Ripple (mV) 100 100 120 120 200 100
RV480-2-FRB
Voltage +3.3V +5V +12V1 +12V2 -12V +5VSB
MAX.Current 30A 30A 15A 15A 0.6A 2A
MAX.Watt 150W 313W 7.2W 10W
Total Watt 480W
Regulation ±5% ±5% ±5% ±5% ±10% ±5%
Noise & Ripple (mV) 100 100 120 120 200 100

POWER SUPPLY Value series User Manual
6
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Overall Performance
Efficiency : 70% at typical full load and normal input voltage
Hold-Up Time : 17ms at full load and normal input voltage
Switching Frequency : 60HZ at normal input.
Stability : ±10%, for 24 hours after warm up.
Protection
Over Load Protection :
150% over load protection
Over voltage protection :
Main output over 20% protection
Short Circuit Protection :
All output equipped with short circuit protection
Environment
Operation Temperature : 0°c to +40°c
Storage Temperature : -40°c to +70°c
Operating Humidity : 10% to 90% RH
Storage Humidity : 10% to 90% RH
Safety standards
TUV/CE/CB/FCC/UL
EMI Standard
Meet with FCC class B and CISPR-22B
HI-POT Testing
Input to ground : 15KVac/10mA 3 second
Input to output : 15KVac/10mA 3 second
Insulation resistance
Input to ground : Min 50M
Input to output : Min 50M
Reliability
MTBF : 50000 hours at 25°c ambient temperature

POWER SUPPLY Value series User Manual
7
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Installation
• Affix the power supply to the case with screws.
• Detach the 4 pin section to have a 20
pin main connector
1. Installing Power Supply
• Plug the 20 pin connector onto the
motherboard.
• Attach the 4 pin section to have a 24
pin main connector
• Plug the 24 pin connector onto the
motherboard.
2. 20+4 pin Main Connector
NOTE :
1. Confirm 20 pin or 24 pin main connector your motherboard needs before the installation.
2. 4 pin section here is used for switching between 20 & 24 pin only.

POWER SUPPLY Value series User Manual
8
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
• The 4 pin 12V connector for mother
board.
• The 6 pin PCI-Express connector for
video card only.
3. 4 pin 12V Connector
4. 6 pin PCI-Express Connector
NOTE :
Confirm if your video card needing the 6 Pin PCI-Express connector or not before the installation.
Not every video card needs it.

POWER SUPPLY Value series User Manual
9
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
• The 4 pin Molex Peripheral connector
used for HDD, Optical Drive and other
devices needing it.
• The 4 pin Floppy connectors used for
Floppy disk or Zip drives.
5. 4 pin Molex Peripheral Connector
• 5 pin SATA connector used for SATA
HDD and Optical Drive.
6. 4 pin Floppy Connector
7. 5 pin SATA Connector

POWER SUPPLY Value series User Manual
10
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
• Select the proper voltage setting.
• Connect the power core to a power
source.
8. Before starting your system
•Confirm the power supply is on
• Attach the power core to the power
supply
offon

POWER SUPPLY Value series User Manual
11
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Thank you for purchasing a High-Quality
Rosewill Product.
Please register your product at : www.rosewill.com
for complete warranty information and future support for your product.
If you have any question while using our products, please feel free to contact us
at [email protected]
Support Phone Number: 800-575-9885
Support Email: [email protected]
Information

POWER SUPPLY Value series User Manual
12
© 2004-2006 Rosewill Inc. All rights reserved by Rosewill
• CASE 6AS5 • ENCLOSURE RX353-S
• KEYBOARD RK028-SLV • ADD ON CARD RC209
• COOLER Z3 • MOUSE RM048
We also offer :
www.rosewill.com

www.rosewill.com