Rosewill RSV-Cage User manual

SERVER ACCESORY RSV-Cage
User Manual
Thank you for purchase the RSV-Cage. This is the HDD cage for RSV-R4000 and RSV-L4000 only. It can help increase the Hard

SERVER ACCESORY RSV-Cage User Manual
1
Drive capacity of both RSV-R4000 and RSV-L4000 from 8 to 12 hard drives.
Installation Guide
Top Cover Disassembly
1. Remove the screws from each side of the
Chassis. (two on each side)
2. Once the screws removed, push the top
cover to remove from the chassis.

SERVER ACCESORY RSV-Cage User Manual
2
3.5” Device Installation
1. First press the two round shape button
using your thumbs, then use your index
finger to push the 3.5” module to remove
it.
2. Pull the module out from the front.
3. Pull the HDD tray out from the module to
begin installation.

SERVER ACCESORY RSV-Cage User Manual
3
4. The HDD tray can be easily clipped onto
3.5” HDD.
5. To complete the 3.5”HDD installation,
push the HDD tray back into the module,
then push the module back to the chassis.
Adding the RSV-Cage
1. First press the two round shape button
using your thumbs, then use your index
finger to push the middle 3.5” module to
remove it.
2. Pull the middle module out from the front
panel

SERVER ACCESORY RSV-Cage User Manual
4
3. Using a flathead screw driver to press the
Yellow circle to move the front panel out.
4. In order to insert the cage into the ODD
tray, you will need to rotate the cage so the
cage rail will match with the side.

SERVER ACCESORY RSV-Cage User Manual
5
5. When the rail matches, please push the
cage slowly into the ODD tray.
6. You will see that the Cage Rails fit right
into the ODD tray’s hole in the yellow
circles.
This completes the installation of the HDD
cage.
7. To remove the HDD Cage, you will need
to push the two buttons (red circles) and
push from behind to slide out the HDD
cage.
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty information and future support for
your product.