Rosewill RSV-Z2000 User manual

2U SERVER RSV-Z2000
User Manual

SERVER RSV-Z2000 User Manual
1
Contents
Product Overview...............................................................................................................................................2
Introduction................................................................................................................................................. 3
Feature.......................................................................................................................................................... 3
Specification............................................................................................................................................... 3
Installation Guide................................................................................................................................................4
Top Cover Disassembly........................................................................................................................... 4
3.5” HDD Installation................................................................................................................................. 5
Power Supply Installation........................................................................................................................ 6

SERVER RSV-Z2000 User Manual
2
Product Overview

SERVER RSV-Z2000 User Manual
3
Introduction
RSV-Z2000 is a 2U rackmount industrial chassis for various kinds of server computer which supports up to
Extended ATX (12” x 13”) form factor motherboard design and PS2 power supply. In addition, RSV-Z2000 has
installed 7x 80mm fan and top ventilation for ultimate cooling while having a vast space which support up to
Extended ATX motherboard.
Feature
z2U rackmount design.
zCarries 9 x internal 3.5" HDD devices totally.
zBest cooling design with carry up to 7x cooling fans (front 80mm front cooling fan x2, 80mm middle cooling
fan x4, and 80mm rear cooling fan x1; all fans are included in RSV-Z2000) and top ventilation for ultimate
cooling.
zSpecial design of fixing PCI card in the system (7 pieces max).
zDual USB 2.0 connector in front panel.
zDesign using ATX power supply
Specification
Chassis Type Rackmount
Color Black
Case Material Metal/ Steel, 1.0 mm thickness
Motherboard Compatibility Extended ATX (12" x 13")
Form Factor 2U Cooling System
80mm Fans 7 max (7 preinstalled)
Expansion
Internal 3.5" Drive Bays 9
Expansion Slots 7 Physical Spec
Control & Indicator 1 xPower switch +1x Reset switch 1 x LED (power) +1 x LED (HDD),
2 x USB2.0
Dimensions(L x W x H) 24 x 17.13 x 3.74 in (60.8 x 43.5 x 9.5 cm); (with handle: 64 x 49 x 9.5 cm)
Weight Net Weight : 17.64 lbs,(8.0 kg) Gross Weight : 18.74 lbs (8.5 kg)
Package Contents RSV-Z2000 Server Case
Screws and other accessories
PIC ITEM PURPOSE PIC ITEM PURPOSE
Motherboard
Standoffs x 16 Motherboard 6mm Screws x 36 Hard Drive

SERVER RSV-Z2000 User Manual
4
5mm Screws x 16 For Standoffs on
Motherboard 6mm Screws x 4 Power Supply
Installation Guide
Top Cover Disassembly
1. Remove the top cover; you should unscrew the four screws
from each side of the Chassis. (two on each side)
2. Once the screws removed, slide the top cover to remove from
the chassis.
You should see the interior of the chassis like below:

SERVER RSV-Z2000 User Manual
5
3.5” HDD Installation
1. After removing the top cover, you will see 3 HDD cages. By
removing the screws on the four corners, you can then pick up
the cage for the HDD installation.
2. Each cage can holds up to 3x HDD.
3. Please install the hard drives following the arrow sign, so all the
connectors are facing toward the center of the chassis. This will
provide an easier cable management.

SERVER RSV-Z2000 User Manual
6
Power Supply Installation 1. You need to remove the power supply rack first in order to install
the power supply.
There are three screws on the bottom of the rack. Two facing
upward and one facing downward. Please unscrew all three.
2. Once release the rack from the chassis, You should also remove
the HDD cage next to the PSU for best fitting. Then you will be
able to install the PSU.
Thank you for purchasing a quality Rosewill Product.
Please register your product at: www.rosewill.com for complete warranty information and future support for
your product.