Rosewill HDD RAID RSV-S4-X User manual

4 Bay SATA to eSATA RAID SUB system
RSV-S4-X
Quick Installation Guide
Thank you for purchasing a quality Rosewill Product.
Please register your product at : www.rosewill.com for
complete warranty information and future support for your product.

4 Bau SATA tp eSATA RAID SUB system RSV-S4-X Quick Installation Guide
1
Package Contents for RSV-S4-X
Item Quantity
RSV-S4-X 1
Power cord 1
eSATA cable 1
2-port eSATA PCIe Adapter 1
Screws Set 1
Quick Installation Guide 1
CD Manual 1
* Please contact Rosewill customer service in case of anything
missing
Hard Drive Installation
1. Remove the tool-less screws on the back panel.
2. Remove the upper chassis cover backwards and lift it upward.
3. Open the front panel and install the HDD from the top to bottom.
4. Fasten the tool-less screws to secure the HDD.

4 Bau SATA tp eSATA RAID SUB system RSV-S4-X Quick Installation Guide
2
5. Close the front panel and the chassis cover, and fasten the tool-less
screws on the back panel.
Hardware Connection Diagram
Installing the PCIe Adapter Card to a Computer
Insert the PCIe Card into an available
PCIe Slot on your computer (Step 1) and
secure with screw (Step 2).

4 Bau SATA tp eSATA RAID SUB system RSV-S4-X Quick Installation Guide
3
Windows System Installation
Step 1
From your desktop, point the cursor at “My Computer”, right click
and select “Manage”.
Step 2
Right click on “Mass Storage Controller” and select “Update
Driver”.
Step 3
Select “Manual Setup (Recommended Selection)”, specify driver
from CD-Rom.
Step 4
The update wizard will popup with “Silicon Image Sil 3132

4 Bau SATA tp eSATA RAID SUB system RSV-S4-X Quick Installation Guide
4
SATALink Controller”, please select and click “OK”.
RAID Mode Setup and Diagrams
To setup RAID mode, please insert the included CD into the computer and install the
SATA RAID Utility. Follow the installation guide in the Detailed Manual to fully setup
the desired RAID mode.