Ross Distortion User manual

LICENSED, MANUFACTURED, AND SOLD BY JHS PEDALS
Electronic sound effects, precision engineered,
hand assembled and individually tested to assure
maximum performance, and reliability.
FULL WARRANTY
ROSS guitar pedals are backed by a one (1) year
warranty from the date of purchase. We warrant this
product to be free from defects in material and
workmanship under normal use. This warranty is
limited to the original purchaser and is not transferable.
This warranty does not cover loss/theft, damage
caused by misuse, modification, abuse, accident,
natural disaster, or unauthorized repair. For full
warranty details and service please visit
RossElectronics.com.

The ROSS Distortion is an op-amp, hard clipping distortion
built around the classic 1970s topology seen in pedals like
the MXR Distortion Plus, the DOD 250, and the Proco RAT.
While this pedal can be used in almost any situation, it excels
at creating natural tube-like distortion and pushing your
amplier into natural breakup.
CONTROLS
“Level” controls volume (right is louder, left is quieter).
“Distort” controls the amount of hard-clipping distortion
(right is more distorted, left is less distorted). The side switch
allows the player to toggle between two versions of the
circuit produced during its fteen-year history: Germanium
mode (“Era 2”version) and Silicon mode (“Era 3”version). The
footswitch activates the pedal via soft touch bypass
switching. The status LED indicates the circuit is active.
JACKS
The ¼” input and output jacks connect to your guitar and
amplier. The power jack accepts standard 9V DC Negative
Center power and consumes 40mA.
DISTORTION