Ross Phaser User manual

LICENSED, MANUFACTURED, AND SOLD BY JHS PEDALS
Electronic sound effects, precision engineered,
hand assembled and individually tested to assure
maximum performance, and reliability.
FULL WARRANTY
ROSS guitar pedals are backed by a one (1) year
warranty from the date of purchase. We warrant this
product to be free from defects in material and
workmanship under normal use. This warranty is
limited to the original purchaser and is not transferable.
This warranty does not cover loss/theft, damage
caused by misuse, modification, abuse, accident,
natural disaster, or unauthorized repair. For full
warranty details and service please visit
RossElectronics.com.

The ROSS Phaser is a versatile OTA-based phaser and a
faithful reproduction of the original ROSS “Era 2” circuit. This
pedal excels at vintage phase, rotary, and univibe tones: fast,
slow, and everything in between.
CONTROLS
“Rate” adjusts the speed of the LFO (left is slower, right is
faster). “Recycle” controls the amount of feedback from the
phaser output stage to the input stage, emphasizing
frequencies or resonance (left is less intense, right is more
intense). The side switch toggles between two modes: classic
phaser and Univibe (simulating the late sixties Shin-Ei
circuit). The footswitch activates the pedal via soft touch
bypass switching. The status LED indicates the circuit is
active.
JACKS
The ¼” input and output jacks connect to your guitar and
amplier. The power jack accepts standard 9V DC Negative
Center power and consumes 42mA.
PHASER