RS PRO SB565 User manual

1. SAFETY PRECAUTIONS
2. SPECIFICATIONS & CONTENTS
3. ASSEMBLY
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. RETAIN THESE INSTRUCTIONS FOR FUTURE USE.
1.1. GENERAL SAFETY INSTRUCTIONS.
!Read the operator’s Manual carefully before
assembling/using your storage chest.
"DO NOT let children near the storage chest.
!Lock lid before moving the tool chest.
Check that the kit contains the following parts, if not
contact your supplier immediately.
SB565, SB765 & SB1200 - 1 - 200406
SB565 SB765 SB1200
Width: 565mm 765mm 1200mm
Depth: 350mm 350mm 450mm
Height: 320mm 320mm 360mm
Weight: 11kg 12kg 20kg
Manufactured from heavy gauge steel. Supplied flat
packed. Quick and easy to assemble with all nuts and
bolts hidden from view once unit is built up. Enamel
finish helps prevent corrosion. Features a cylindrical lock
for added security. Suitable for site, workshop and home
use.
CONTENTS
BACK BASE
FRONT
LID
SIDES X 2 LOCK CONTENTS
4 X PVC PLUGS
18 X LOCK NUTS
26 X LOCK NUTS
ASSEMBLY TOOL
ATTACH FRONT TO BASE USING FIXED SCREWS AS
A GUIDE. DO NOT OVERTIGHTEN
STEP 2
FIXED SCREW
STEP 1
ATTACH BACK
PANEL TO BASE
USING FIXED
SCREWS AS A
GUIDE. DO NOT
OVERTIGHTEN

STEP 4
ATTACH LID USING FIXED SCREWS AS A GUIDE. DO
NOT OVERTIGHTEN
STEP 5
ONCE BOX IS
ASSEMBLED
INSERT PVC
PLUGS INTO EACH
OF THE CORNER
HOLES
STEP 2
INSERT LOCK INTO HOLE PROVIDED
STEP 3
ATTACH RETENTION CLIP TO REAR OF LOCK
STEP 4
SCREW LATCH ONTO LOCK BARREL
LOCK ASSEMBLY. STEP 1
DISASSEMBLE LOCK (UNSCREW)
STEP 3
ATTACH BOTH SIDES USING FIXED SCREWS AS A
GUIDE. DO NOT OVERTIGHTEN
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.