RS PRO 791-8276 User manual

Flood Lights
Page 1 of 5
RS Components –Buy this product from https://uk.rs-online.com/
RS PRO Floodlight, 400 W, IP44
220 →240 V ac
RS Stock No.: 791-8276
RS Professionally Approved Products bring to you professional
quality parts across all product categories. Our product range has
been tested by engineers and provides a comparable quality to the
leading brands without paying a premium price.
•No need for ballast or
ignitor circuits
•Die-cast aluminium
body
•Hinged toughened glass
lens sealed with a
silicone rubber gasket
•Dimpled anodised
aluminium reflector
provides a wide spread
of light
•Robust, practical, and
weatherproof, IP44
rated halogen floodlight
with wall mounting
bracket
FEATURES

Flood Lights
Page 2 of 5
RS Components –Buy this product from https://uk.rs-online.com/
Flood lights will spread an even illumination across an area with no shadows. Quite often called base
lighting. Stores, factories, office buildings and public spaces will use lots of lights to blanket an area.
A spotlight usually has a reflector and lens assembly that concentrates the light into a narrow spot
whereas a flood light spreads light everywhere.
*Notice*: The product is bulb excluded.
Dimension
265 x 185 x 125 mm
Weight
0.82 KG
Case Material
Die Cast Aluminium
Finish
Epoxy matt black
Lamp supplied
No
Floodlight Type
Indoor, Outdoor
Voltage
220 -> 240V ac, 50hz
Wattage
400 W
IP rating
IP44
Custom Tariff Number
9405402000
Standards Met
GS / EMC / IP44
Product Description
ATTRIBUTE 1
Electrical Specifications
Additional Information
Approvals
General Specifications

Flood Lights
Page 3 of 5
RS Components –Buy this product from https://uk.rs-online.com/
Stock No.
Brand
Product Name
791-8264
RS PRO
Floodlight, 120 W, IP44 PIR
791-8267
RS PRO
Halogen Work Light, 400 W, 220 →240 V
Similar Products

Flood Lights
Page 4 of 5
RS Components –Buy this product from https://uk.rs-online.com/
Safety instructions
1. Before mounting and maintenance please make sure that the electrical supply has been
switched off to avoid electric shock.
2.The lamp must be earthed. Make sure that the ground lead has been connected properly.
3. The bulb will become very hot while using, never touch the bulb while the lamp is switched
on or it has not cooled down completely.
4. When replacing the bulb make sure the new bulb fits rated wattage and socket type.
5. Never look into the light directly when it is switched on.
6. The power cord must be a VDE-certified H05RN-F 3G 1.0 mm ² cable waterproof.
7. A maximum of 8 mm can be skinned of the supply lead.
8. Do not use the lamp without shade. If shade is broken stop using the lamp and replace a
new shade.
Installation
1.The light is only suitable for fixed mounting.
2.Fix the appliance by 2 screws of minimum 6 mm and maximum 7 mm diameter.
3.Connect the yellow/green conductor of the connection supply cable with the connection
block, marked with the earthing symbol. Mount the other wires into the connector block .see
mark N and L(Fig.1)
4.For applications on normal inflammable surfaces follow the instructions of fig.2
5.Respect a minimum distance of 1 meter between the appliance and the object or surface with
must be lightened(fig.3).
6. The halogen lamp in this fitting will burn through quickly if the fitting is fixed under an angle of
more than 40(fig.4).
7.Fix now the halogen lamp in the lamp holder. Halogen lamp should not be touched with bare
hands(fig.5).
Change the bulb
1. Before maintenance and replacement of bulb always make sure the power supply has
been switched off.
2. Open the lamp cover.
3. Twist the old bulb out carefully.
4. Twist a new bulb into the socket. Make sure that new bulb fits technical data of your lamp.
5. Close the lamp cover.
WARNING: The maintaining should be done only by a qualified electrician.

Flood Lights
Page 5 of 5
RS Components –Buy this product from https://uk.rs-online.com/
N
L
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmentally safe recycling.