Rugged Radios RRP600 User manual

Rugged Race Products RRP600 Intercom
Remote Head Installation Instructions
1) Remove 4 screws from front faceplate of RRP600 Intercom. Pull back faceplate to
expose leads connected to circuit board.

2) Unplug the 4 separate leads from the circuit board and store in a safe place. Connect
new remote head as shown:

3) Reinstall 4 faceplate screws, connect red and green remote head extension leads to
their respective ports on new intercom faceplate:
4) Mount remote mount head and enjoy!
Any questions or problems please call Rugged Race Products, 1-888-541-RACE