Ruijie RG-WS7005-A(V2) Installation and operating manual

Ruijie RG-WS7005-A(V2) Wireless Access
Controller
Hardware Installation and Reference Guide
Document Version: V1.3
Date: August 16, 2023
Copyright © 2023 Ruijie
Networks

Copyright
Copyright © 2023 Ruijie Networks
All rights are reserved in this document and this statement.
Any reproduction, excerption, backup, modification, transmission, translation or
commercial use of this document or any portion of this document, in any form or by any
means, without the prior written consent of Ruijie Networks is prohibited.
Trademark and are owned by Ruijie
Networks.
All other trademarks or registered trademarks mentioned in this document are owned by
their respective owners.
Disclaimer
The products, services, or features you purchase are subject to commercial contracts and
terms. Some or all of the products, services or features described in this document may
not be within the scope of your purchase or use. Unless otherwise agreed in the contract,
Ruijie Networks does not make any express or implied statement or guarantee for the
content of this document.
Due to product version upgrades or other reasons, the content of this document will be
updated from time to time. Ruijie Networks reserves the right to modify the content of
the document without any notice or prompt.
This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy
and will not shoulder any responsibility for losses and damages caused due to content
omissions, inaccuracies or errors.

I
Preface
Intended Audience
This document is intended for:
Network engineers
Technical support and servicing engineers
Network administrators
Technical Support
Ruijie Networks Website: https://www.ruijienetworks.com/
Technical Support Website: https://ruijienetworks.com/support
Case Portal: https://caseportal.ruijienetworks.com
Community: https://community.ruijienetworks.com
Technical Support Email: [e-mail]
Live Chat: https://www.ruijienetworks.com/rita
Conventions
1. Conversions
Convention
Description
Bold font
Commands, command options, and keywords are in bold font.
Italic font
Arguments for which you supply values are in italic font.
[ ]
Elements in square brackets are optional.
{ x | y | z }
Alternative keywords are grouped in braces and separated by
vertical bars.
[ x | y | z ]
Optional alternative keywords are grouped in brackets and
separated by vertical bars.
&<1-n>
The argument before the sign (&) can be input for consecutive 1-
n times.
//
Double slashes at the beginning of a line of code indicate a
comment line.

II
2. Signs
The signs used in this document are described as follows:
Warning
An alert that calls attention to important rules and information that if not understood or
followed can result in data loss or equipment damage.
Caution
An alert that calls attention to essential information that if not understood or followed
can result in function failure or performance degradation.
Note
An alert that contains additional or supplementary information that if not understood or
followed will not lead to serious consequences.
Specification
An alert that contains a description of product or version support.
3. Note
The manual offers configuration information (including model, port type and command
line interface) for indicative purpose only. In case of any discrepancy or inconsistency
between the manual and the actual version, the actual version prevails.

i
Contents
Preface...................................................................................................................................................I
1 Product Overview .............................................................................................................................1
1.1 About the RG-WS7005-A(V2)....................................................................................................1
1.2 Hardware Features...................................................................................................................1
1.3 Package Contents.....................................................................................................................5
1.4 Technical Specifications...........................................................................................................5
1.4.1 Dimensions and Weight...............................................................................................5
1.4.2 Ports ..............................................................................................................................6
1.4.3 Power Supply and Consumption ................................................................................6
1.4.4 Environment and Reliability ........................................................................................7
1.5 LED and Button.........................................................................................................................7
2 Preparing for Installation...............................................................................................................10
1.6 Safety Precautions..................................................................................................................10
1.6.1 General Safety Precautions .......................................................................................10
1.6.2 Handling Safety ..........................................................................................................11
1.6.3 Electric Safety..............................................................................................................11
1.6.4 Storage Security .........................................................................................................11
1.7 Installation Environment Requirements..............................................................................12
1.7.1 Bearing Requirements...............................................................................................12

ii
1.7.2 Ventilation Requirements..........................................................................................12
1.7.3 Clearance Requirements ...........................................................................................12
1.7.4 Temperature and Humidity Requirements..............................................................12
1.7.5 Cleanliness Requirements.........................................................................................13
1.7.6 Grounding Requirement ...........................................................................................14
1.7.7 ESD Protection Requirements...................................................................................15
1.7.8 Anti-interference Requirements ...............................................................................15
1.7.9 Surge Protection Requirements................................................................................16
1.7.10 Others........................................................................................................................16
1.8 Tools ........................................................................................................................................16
2 Installing the Device.......................................................................................................................17
2.1 Installation Procedure ...........................................................................................................17
2.2 Checking Before Installation.................................................................................................18
2.3 Precautions.............................................................................................................................19
2.4 Installing the Device...............................................................................................................19
2.4.1 Securing a Device .......................................................................................................19
2.4.2 Installing a Power Module.........................................................................................20
2.4.3 Grounding Installation...............................................................................................20
2.5 Bundling Cables......................................................................................................................20
2.5.1 Notes ...........................................................................................................................20
2.5.2 Bundling Steps............................................................................................................20

iii
2.6 Verifying Installation..............................................................................................................21
2.6.1 Checking the AC .........................................................................................................21
2.6.2 Checking Cable Connections.....................................................................................21
2.6.3 Checking the Power Supply.......................................................................................21
3 Commissioning ...............................................................................................................................22
3.1 Setting Up the Configuration Environment .........................................................................22
3.1.1 Environment Preparations ........................................................................................22
3.1.2 Connecting an Ethernet Cable ..................................................................................22
3.1.3 Setting Terminal Parameters ....................................................................................23
3.2 Powering on the Device.........................................................................................................25
3.2.1 Checklist Before Power-On........................................................................................25
3.2.2 Checklist After Power-on ...........................................................................................25
4 Monitoring and Maintenance........................................................................................................26
4.1 Monitoring ..............................................................................................................................26
4.1.1 LED...............................................................................................................................26
4.1.2 CLI commands............................................................................................................26
4.2 Remote Maintenance.............................................................................................................26
4.3 Hardware Maintenance .........................................................................................................26
5 FAQs.................................................................................................................................................27
5.1 Troubleshooting Flowchart ...................................................................................................27
5.2 Common Faults ......................................................................................................................27

iv
5.2.1 Ethernet Port Is Not Working After the Ethernet Cable Is Plugged In..................27
5.2.2 LED Is Off for a Long Time.........................................................................................27
5.2.3 System LED Blinks Green for a Long Time...............................................................27
5.2.4 Troubleshooting Power Failures...............................................................................28
5.2.5 Troubleshooting System Failures .............................................................................28
6 Appendix .........................................................................................................................................30
6.1 Connectors and Media...........................................................................................................30
6.2 Cabling ....................................................................................................................................32
6.3 Power Supply Specifications..................................................................................................36

Hardware Installation and Reference Guide Product Overview
1
1 Product Overview
1.1 About the RG-WS7005-A(V2)
The RG-WS7005-A(V2) is a next-generation Gigabit wireless access controller (AC)
launched by Ruijie Networks. It is mainly applied in small- and medium-sized wireless
local area networks (WLANs) to provide powerful access control and radio management
functions. The RG-WS7005-A(V2) supports 54 V DC power supply. With one Gigabit WAN
port and four Gigabit LAN ports powered by PoE, it can uniformly manage Ruijie wireless
access points (APs) and supply power for them. It simplifies wireless networking and
supports the expansion of 4G LTE universal I/O modules. The RG-WS7005-A(V2) can be
deployed on a Layer 2 or Layer 3 network and maintain communications with APs. It
supports interconnection with the WIS system to realize wireless network control on the
mobile end. It can manage up to 64 APs.
1.2 Hardware Features
The front panel of the RG-WS7005-A(V2) accommodates 5 x GE ports, 1 x USB 2.0 port, 1 x
console port, 1 x button, and 1 x DC power connector. The rear panel provides one 4G
module slot.
Figure 1-1Front View of the RG-WS7005-A(V2)

Hardware Installation and Reference Guide Product Overview
2
Figure 1-2Top View of the RG-WS7005-A(V2)
Figure 1-3Front Panel of the RG-WS7005-A(V2)
Table 1-1 Buttons and Ports on the Front Panel
No.
Buttons and
Ports
Description
1
Reset button
Used to reboot the device or restore the device to factory
settings
2
PWR LED
Used to indicate the working status of power supply
3
WAN status LED
Used to indicate the working status of the WAN port

Hardware Installation and Reference Guide Product Overview
3
No.
Buttons and
Ports
Description
4
LAN1 status LED
Used to indicate the working status of the LAN1 port
5
LAN2 status LED
Used to indicate the working status of the LAN2 port
6
LAN3 status LED
Used to indicate the working status of the LAN3 port
7
LAN4 status LED
Used to indicate the working status of the LAN4 port
8
SYS status LED
Used to indicate the working status of the system
9
PoE status LED
of the LAN1 port
Used to indicate the PoE status of the LAN1 port
10
PoE status LED
of the LAN2 port
Used to indicate the PoE status of the LAN2 port
11
PoE status LED
of the LAN3 port
Used to indicate the PoE status of the LAN3 port
12
PoE status LED
of the LAN4 port
Used to indicate the PoE status of the LAN4 port
13
USB port
Used for storing logs
14
Console port
Connected to the serial port of a PC with an Ethernet cable
for device management
15
WAN port
Uplink service port for data transmission
16
LAN1 port
Uplink service port for data transmission, supporting IEEE
802.3af/at-compliant PoE
17
LAN2 port
Uplink service port for data transmission, supporting IEEE
802.3af/at-compliant PoE
18
LAN3 port
Uplink service port for data transmission, supporting IEEE
802.3af/at-compliant PoE

Hardware Installation and Reference Guide Product Overview
4
No.
Buttons and
Ports
Description
19
LAN4 port
Uplink service port for data transmission, supporting IEEE
802.3af/at-compliant PoE
20
DC power
connector
Used to connect with a DC power supply
Figure 1-4Rear Panel of the RG-WS7005-A(V2)
Table 1-2 Description of the Rear Panel
No.
Buttons and
Ports
Description
1
Grounding
screw
Used to connect with the ground cable
2
Filler panel
Filler panel for 4G module
Note
The product nameplate is located at the bottom of the device.

Hardware Installation and Reference Guide Product Overview
5
1.3 Package Contents
Table 1-3 Package Contents
No.
Item
Quantity
1
Main unit
1
2
Rubber pad
4
3
DC power adapter
1
4
M3 × 25 mm Phillips pan head screw
4
5
Warranty Card and Hazardous Substance Table
1
6
Hardware Installation and Reference Guide
1
1.4 Technical Specifications
1.4.1 Dimensions and Weight
Table 1-4 Dimensions and Weight
Dimensions and
Weight
RG-WS7005-A(V2)
Dimensions (W x D x
H)
200 mm × 110 mm × 25 mm (7.87 in. x 4.33 in. x 0.98 in.)
Rack height
1 RU
Weight
1.1 kg (2.43 lbs)
Mounting
Workbench- and wall-mount

Hardware Installation and Reference Guide Product Overview
6
1.4.2 Ports
Table 1-5 Ports
Ports
RG-WS7005-A(V2)
Fixed service ports
1 x 10/100/1000Base-T auto-sensing Ethernet port
4 x 10/100/1000Base-T auto-sensing Ethernet ports, supporting
IEEE 802.3af/at-compliant PoE (PoE power consumption ≤56 W)
Fixed management
ports
1 x RJ45 console port
1 x USB port
Status LED
1 x system status LED
1 x PWR LED
1 x WAN port status LED
4 x LAN port status LEDs
4 x PoE status LEDs of LAN Ports
Button
1 x reset button
Module slot
1 x 4G module slot
1.4.3 Power Supply and Consumption
Table 1-6 Power Supply and Consumption
Power Supply and
Consumption
RG-WS7005-A(V2)
Max. power
consumption
64.2 W
Power module
redundancy
Not supported
Input voltage
DC power supply (DC input voltage and current: 54 V/1.48 A)
Output voltage
54 V

Hardware Installation and Reference Guide Product Overview
7
Power Supply and
Consumption
RG-WS7005-A(V2)
PoE output
supporting IEEE 802.3af-compliant PoE output to external
devices
1.4.4 Environment and Reliability
Table 1-7 Environment and Reliability
Environment and
Reliability
RG-WS7005-A(V2)
Temperature
Operating temperature: –10°C to +40°C (14°F to 104°F)
Storage temperature: –40°C to +70°C (–40°F to +158°F)
Note: At a height between 3000 m (9842.52 ft.) and 5000 m
(16404.2 ft.), every time the altitude increases by 220 m (722 ft.),
the maximum temperature decreases by 1°C (1.8°F).
Humidity
Operating humidity: 5% RH to 95% RH (non-condensing)
Storage humidity: 5% RH to 95% RH (non-condensing)
Regulatory
Compliance
EN 5503, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, ETSI EN 300
386, IEC 62368-1, and EN 62368-1
1.5 LED and Button
Table 1-8 LED
LED Type
LED Status
Description
PWR LED
Off
The AC is not powered on.
Solid green
The AC is powered off.
System status
LED
Off
The system is not functioning properly.
Blinking
The system is being initialized.

Hardware Installation and Reference Guide Product Overview
8
LED Type
LED Status
Description
green
Solid green
Initialization is complete.
PoE status LED
Solid
orange
PoE is enabled.
Off
PoE is disabled.
LAN port status
LED
Off
No link is detected for this port.
Solid green
The port has made a successful 1000 Mbps link.
Blinking
green
The port is sending and receiving traffic at 1000 Mbps.
Solid
orange
The port has made a successful 10/100 Mbps link.
Blinking
orange
The port is sending or receiving data at 10/100 Mbps.
WAN port status
LED
Off
No link is detected for this port.
Solid green
The port has made a successful 1000 Mbps link.
Blinking
green
The port is sending and receiving traffic at 1000 Mbps.
Solid
orange
The port has made a successful 10/100 Mbps link.
Blinking
orange
The port is sending or receiving traffic at 10/100 Mbps.

Hardware Installation and Reference Guide Product Overview
9
Table 1-9 Reset Button
Button
Action
Description
Reset button
Press the button for shorter
than 3s.
Restart the AC.
Press the button for more
than 3s.
Restore the AC to factory settings.

Hardware Installation and Reference Guide Preparing for Installation
10
2 Preparing for Installation
2.1 Safety Precautions
Note
To avoid personal injury and device damage, carefully read the safety precautions
before you install the AC.
The following safety precautions may not cover all possible hazardous situations.
2.1.1 General Safety Precautions
Warning
Operation of this equipment in a residential environment could cause radio interference.
Do not expose the AC to high temperature, dusts, or harmful gases. Do not install the
AC in an inflammable or explosive environment. Keep the AC away from EMI sources
such as large radar stations, radio stations, and substations. Do not subject the AC to
unstable voltage, vibration, and noises.
The installation site should be free from water flooding, seepage, dripping, or
condensation. The installation site should be selected according to network planning,
communications equipment features, and considerations such as climate, hydrology,
geology, earthquake, electrical power, and transportation.
The installation site should be dry. It is not recommended that the AC be installed in a
place near the sea. Keep the device at least 500 meters (1640.42 ft.) away from the
ocean. It is recommended that the device not be facing the direction of sea breeze.
Do not place the device in walking areas.
During installation and maintenance, do not wear loose clothes, ornaments, or any
other things that may be hooked by the device.
Keep tools and components away from the walking area.

Hardware Installation and Reference Guide Preparing for Installation
11
2.1.2 Handling Safety
Avoid moving the device frequently.
Cut off all power supplies and unplug all power cords before handling the device.
2.1.3 Electric Safety
Warning
Improper or incorrect electric operations may cause a fire, electric shock, and other
accidents, and lead to severe and fatal personal injury and device damage.
Direct or indirect touch through a wet object on high-voltage and mains supply can
bring a fatal danger.
Observe local regulations and specifications during electric operations. Only personnel
with relevant qualifications can perform such operations.
Check potential risks in the work area, such as wet floor.
Find out the position of the indoor emergency power switch before installation. Cut off
the power switch in the case of accidents.
Make sure that the device is powered off when you cut off the power supply.
Do not place the AC in a wet position, and keep it away from liquid.
Keep the AC far away from grounding or lightning protection devices for power
equipment.
Keep the AC away from high-powered wireless devices, such as radio stations, radar
stations, high-frequency high-current devices, and microwave ovens.
2.1.4 Storage Security
To ensure proper working of the device, store the device in an environment based on the
storage temperature or humidity requirements in specifications.
Caution
If the device has been powered off for more than 18 months, power on the device and
run it for consecutive 24 hours to activate the device.

Hardware Installation and Reference Guide Preparing for Installation
12
2.2 Installation Environment Requirements
The AC must be installed and used indoors. For normal operation and prolonged service
life of the AC,
the installation site must meet the following requirements:
2.2.1 Bearing Requirements
Evaluate the weight of the device and its accessories (such as the power supply module),
and ensure that the installation site can bear the weight.
2.2.2 Ventilation Requirements
Reserve sufficient space in front of air vents to ensure normal heat dissipation. After
various cables are connected, bundle the cables or place them in the cable management
arm to avoid blocking air inlets.
2.2.3 Clearance Requirements
Do not install the device against the wall. Instead, maintain a minimum clearance of 400
mm (15.75 in.) around the device for heat dissipation and device maintenance.
2.2.4 Temperature and Humidity Requirements
To ensure the normal operation and prolonged service life of the device, maintain an
appropriate temperature and humidity in the machine room.
The machine room with too high or too low temperature and humidity for a long period
may damage the AC.
In an environment with high relative humidity, the insulating material may have poor
insulation or even leak electricity.
In an environment with low relative humidity, the insulating strip may dry and shrink,
resulting in screw loosening.
In a dry environment, internal circuits are prone to static electricity.
A high temperature can accelerate the aging process of insulation materials, greatly
reducing the reliability of the AC and severely affecting its service life.