Rukket Sports BARR200 User manual

BARRIER NET CONNECTOR
ASSEMBLY INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1
RukketSports
Our video instructions provide the best guidance for setting up your Barrier Net Connector.
They can be viewed online at
A
B
B
Connector
Insert Button

1.
4 ft.
Set the barrier nets to be
joined about 4 feet from each
other.
2.
Pull down one of the
barrier net’s berglass
poles and loop the white
rope around the knob on
the top of the berglass.
Repeat with the other
side.
BARRIER NET CONNECTOR
ASSEMBLY INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1
RukketSports
Our video instructions provide the best guidance for setting up your Barrier Net Connector.
They can be viewed online at
3.
Loop the black bungees at the
bottom of the connector around
the metal post on the barrier
net’s frame leg.
4.
Attach the four disk snap connectors
on either side of the barrier net
connector to the barrier nets on both
sides. Do this by running the plastic
disk snap around the berglass pole
and through the barrier net’s netting
so that it captures both. Slide the black
plastic disk button into its receiver
until it snaps into place.