Rukket Sports SOCK IT! BASEBALL User manual

SOCK IT! BASEBALL/SOFTBALL NET
ASSEMBLY INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1
Our video instructions provide the best guidance for setting up your Sock It! Baseball/Softball Net.
They can be viewed online at
RukketSports
A. PVC cap
B. Plug for support tubes
C. Metal spring button
D. Left support tube
E. Right support tube
F. Double taper tube
G. Single taper tube
H. Aluminum cap for berglass pole
I. Fiberglass poles
J. Aluminum connector for berglass pole
K. Metal stakes
L. Basketball Net
M.Target
M

Then attach both end legs
(Fig. B)
1. Join the two slightly bent
pipes together (Fig. A) poles,with coupling tubes at
the top, into the angled pipes
on the metal base.
2. Install the two lower berglass 3. Thread a berglass pole
through one of the net's sleeves
making sure the net is right side up
(white loops at the top corners and
black bungees at the bottom corners).
4. Repeat for the other side. 5. Insert an upper berglass
pole into one of the lower pole's
coupling tube. The metal knob
should be at the top.
6. Gripping the assembled
berglass pole, slide the
net's sleeve up the pole and
loop the white rope onto the
metal knob on top.
7. Insert the remaining
upper berglass pole
into the remaining
lower pole.
8. Grip the pole and slide
the sleeve up before
looping the white rope
around the metal pole top.
SOCK IT! BASEBALL/SOFTBALL NET
ASSEMBLY INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1
9. Loop the black elastic bungees
over the metal posts located on the
outside of each end leg. Wrap the
velcro around the frame (X in Fig. 8).

SOCK IT! BASEBALL/SOFTBALL NET
ASSEMBLY INSTRUCTIONS
QUESTIONS? GIVE US A CALL! (1-855)-478-5538
V1
10. Lay the target at on the ground to
make it easier to untangle. Insert the
black hooks on the upper strike zone
straps into the red loops in the upper
corners of the net.
11. Attach the lower bungee loop
from the lower strike zone cords
to the post at the base of both legs.
12.To adjust the height of the strike
zone target, slide the plastic adjusters
along the nylon tape up or down.
13. For a higher strike zone, use the
elastic loops at the end of the elastic
cords. For a lower strike zone, use the
elastic loops farther up the elastic cords.
14.The four inner ropes slide along
the strike zone edges
15. Adjust the ropes any way you
want to create your own unique
pitching challenges!